reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Stepped drill with spiral flutes for optimum chip evacuation and high-performance coating for high wear resistance.

Stepped drill with spiral flutes for optimum chip evacuation and high-performance coating for high wear resistance.

Stepped drill HSS, TiAlN, Cutter Dia. With cylindrical spotting drill, Dia.5, M32x1.

    • Special geometry for optimum swarf evacuation.

    Special geometry for optimum swarf evacuation.

    With extra-long shank Advantage: Designed for tapping threads where access is difficult. GARANT Master Tap Universal taps designed for use in a wide spectrum of materials with high process reliability.

    • Functional width L4: 25 mm Head length L1: 35 mm Overall length L: 125 mm Shim: 259033 6

    Functional width L4: 25 mm Head length L1: 35 mm Overall length L: 125 mm Shim: 259033 6

    Optional connection possibility via hose connection G 1/8 inch No.0804.

    • With point geometry shape C.

    With point geometry shape C.

    8 mm Recommendation: Maximum drilling depth: L2 = LC 1.HSS-Co8 Jobber Drill, TiAlN Coated, 3.

    • Nominal Dia.

    Nominal Dia.

    . and shank Dia.5 x DC.9 mm equal.

    • dia size 3.7 both ends with center points- dia size 3.8 both ends with center holes.

    dia size 3.7 both ends with center points- dia size 3.8 both ends with center holes.

    Application for type of drilling: for through holes Tolerance: H7 Number of cutting edges Z: 3 Tolerance: H7 Flute length Lc: 9 mm Overhang L1: 20 mm Overall length L: 43 mm Number of cutting edges Z: 3 Shank dia Ds: 2 mm Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.7 with 3 teeth- dia size 1. dia size 1.6 mm, Uncoated For highest concentricity and process reliability.

    • Detailed application values can be found in our application ToolScout.

    Detailed application values can be found in our application ToolScout.

    Profile Broaching Insert, Square, 12 mm Shank Diameter, 3 mm Application: For generation of profiles in a single pass.

    • Application: For determining the tooth widths of spur and helical gears from module 0.8.

    Application: For determining the tooth widths of spur and helical gears from module 0.8.

    External Micrometer, Disc Anvils, Non-rotating Spindle, Measuring Range: 25-50 mm. With large-area, hardened disc anvils.

    • Ring end with especially smooth-running, robust ring ratchet.
    • Carbide Boring Bar, E16R SVJBL 11, for VB 2 Inserts, Left-Hand

    Carbide Boring Bar, E16R SVJBL 11, for VB 2 Inserts, Left-Hand

    Boring bar carbide 16/11 mmStandard: Works standard Shank Diameters: 16 mm ISO code toolholder: E16R SVJBR/L 11 Setting angle k: 142 degrees suitable indexable insert: VB 1103 Minimum pre-drill Diametermin: 22 mm Center offset L3: 2 mm.

    • optimized honed cutting edges.

    optimized honed cutting edges.

    Application: For Whitworth parallel pipe threads DIN-ISO 228/1 threads that do not form a seal within the connection.Strong spiral point for process stability at high cutting forces.

    • The core drill cuts only a thin material ring.

    The core drill cuts only a thin material ring.

    Application: On mobile magnetic drilling machines or stationary pillar drilling machines to produce large holes in steel construction.HSS Core Drill, Depth of Cut 30 mm, Uncoated, 45 mm Supplied with: Without ejector pin.

    • recess: 35 mm Recess Dia.

    recess: 35 mm Recess Dia.

    92 mm Overall length L: 70 mm of teeth Z: 2 Flute length Lc: 3. Diabolo Solid Carbide Copy Slot Drill, for Hard Steels, TiAlN Coated, 3X35 mm Neck Dia. D1: 2.05xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed! Note: At greater tool overhang lengths, use a reduced value for ap!.

    • Grinding medium code: A Grit equivalent: 180 recommended speed: 4000 min-1 maximum speed: 7000 min-1

    Grinding medium code: A Grit equivalent: 180 recommended speed: 4000 min-1 maximum speed: 7000 min-1

    . Application: For matting and polishing without abrupt changes in texture. Sinusoidal abrasive fleece without cut edges.

    • Square drive: 3/8 in dia drive output end: 22 mm Length: 27 mm

    Square drive: 3/8 in dia drive output end: 22 mm Length: 27 mm

    . Forged from high quality steel- internally bevelled for easy fitting to bolt heads. Material: Chrome vanadium steel- chrome-plated.

    • 122606 is necessary.

    122606 is necessary.

    121068 - 121121 or 4xD pilot drilling operation with pilot drill No. For process reliability when using the 16xD deep hole drill, an initial Center drilling with No. With 135 Deg point angle and special h7 cutting edge tolerance for optimum generation of a deep hole. Note: Flute length LC = L2 + 1.

    • Due to alternate set teeth staggered high cutting performance is achieved.

    Due to alternate set teeth staggered high cutting performance is achieved.

    The mill cuts on all three sides.T-Slot Cutter, Uncoated, 28X12 mm Note: For milling T-slots to DIN 650 into machine tables on jigs and fixtures..

    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    High performance drills for outstanding performance.

    • Special surface treatment.
    • For safety reasons must always be secured using a suitable locking pin and O-ring.
    • 13.16 mm Overall length L: 100 mm Shank Dia.

    13.16 mm Overall length L: 100 mm Shank Dia.

    11. Improved HSS-E tool material with low-friction TiN coating. Tool material: HSS E Threads per inch: 19 Thread Dia. HOLEX Pro Tap general-purpose tap.

    • Clamping Dia D1: 25 mm Overhang dimension A: 160 mm External Dia D: 53 mm Dia D2: 44 mm
    • D1 +0.05: 3.9 mm Overall length L: 100 mm Shape: Pointed Shank Dia.
    • 1204..
    • A slim chisel edge and the special arrangement of the 4 guide chamfers ensure high positioning and alignment accuracy.

    A slim chisel edge and the special arrangement of the 4 guide chamfers ensure high positioning and alignment accuracy.

    .Master Steel SPEED Solid Carbide Drill, Plain Shank, TiAlN Coated, 8. Note: Flute length LC = L2 + 1. Coating for best wear resistance even at high process temperatures.

    • With internal coolant feed laterally from the grooves.

    With internal coolant feed laterally from the grooves.

    HSS-E-PM substrate for top process reliability.75 mm Overall length L: 80 mm Shank Dia..

    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    .5 mm Standard core thickness and core taper. Note: Suitable NC spotting drills No.

    • of teeth Z: 2 Helix angle: 20 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h6 No.

    of teeth Z: 2 Helix angle: 20 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h6 No.

    Ds: 3 mm recess: 14 mm Recess Dia.8 mm Overall length L: 50 mm Shank Dia. With the latest generation of DLC coating sp2. Application: Double relieved chip angle, especially for aluminium machining.

    • Cloth is drawn from the middle of the roll- ensures a tidy workplace.

    Cloth is drawn from the middle of the roll- ensures a tidy workplace.

    Molds ideally to the workpiece geometry. Economy roll 115 mm wide for all popular orbital sanders..

    • For safety reasons must always be secured using a suitable locking pin and O-ring.
    • PREVIOUS 160401 160402 160403 160404 160405 160406 160407 160408 160409 160410 160411 160412 160413 160414 160415 160416 160417 NEXT