OLADANCE EBOLA08XSLEN01 Ows Sports True Wireless In Ear Headphones, Silver.

ITSKINS AP5X-HMFRT-BLUE Hybrid r Frost Magsafe Case For Apple Iphone 15 Pro,.

.Step-In in. Sturdy webbing hangles with Velcro closure and removable shoulder strap.Step-In Turnout Gear Bag, Lime ID pocket and reflective lining for increased visibility.

Square, .243 Thru . We at Breakthrough Clean Technologies are committed to making your equipment maintenance faster and safer than ever.Cotton Patches, 1.

.Springs, Dbl-Eye 25-1/4 in.E.

NACHI 1061814 Screw Machine Length HSS Drill - #8.

THRIFCO PLUMBING 5436272 1 Inch Plastic Standard Pipe Clamp.

.Thrifco Plumbing 5320007 1/2 X 4 BRASS NIPPLE.

1/8 Inch Galvanized Cap Our schedule 40 class 150 galvanized steel is hydrostatically tested directly at the factory..

A nipple is a short piece of pipe with male pipe threads at both ends.3/4 Inch x 11 Inch Galvanized Steel Nipple They are commonly used for outdoor and industrial applications..

They can be through-panel mounted with the supplied mounting nut, bracket-mounted with the optional bracket or, due to their light weight, mounted by their ports.Pressure Regulator, Relieving, Filter, T51FR Series, 0-100 PSIG, 1/4in Port These versatile regulators provide excellent regulation for a wide range of applications, including pneumatic instruments, controllers, chucks, and actuators.

75 in L X Polypropylene, Blue.•Made of polypropylene material•Smooth top over a ribbed design bottom•Removable cover for storage•Durable and easy to clean•Lightweight•Reversible placing option•No assembly required Used as a footrest, magazine stand, accent piece, or end table the options are quite endless.75 in W X 16.Built from strong and durable plastic, the side table is sturdy as much as it is aesthetically pleasing.

38 in Dia.DODGE 119112 Stock Bore Taper Lock Bushing, 1-1/4 in Dia Bore, 3.

WHITECAP TEAK 60876 3/4in Flat Grating Material.

Overhang length H: 25 mm Shank square: 6..

For safety reasons must always be secured using a suitable locking pin and O-ring.

Corrected thread profile for milling exact internal or external Whitworth pipe threads, ensure stable clamping conditions. Master TM Solid Carbide Thread Mill, for Whitworth Pipe Threads, 1/8in-28 Thread Size, AlTiN Coated.907 mm Threads per inch: 28 Nominal Dia.

5-15 mm, 16 Leaves.5 mm increments: 7.

Counterbore with Interchangeable Pilot Pins, 18 mm Note: For suitable reducing adapters for tools with MT shanks see No. However, with an appropriate pilot, a counterbore can be used for other screw sizes or counterbore / pilot diameter combinations. Multi-edged, spiral fluted counterbore with recess in face for fitting various pilots.

343000-343530.

5 / G 25,000 rpm. End Mill Holder, Form ADB with cooling channel bores, SK 40, Projection: 130, Clamping Range: 10mm Balancing quality G 2.

High-performance tap specially developed for aluminum and non-ferrous alloys.

Handle length: 600 mm Standard: DIN 6475 Material: Special tool steel.Faces hardened and tempered. Drop-forged hammer head.

HSS-E Stub Drill, TiN Coated, 3. Recommendation: Maximum drilling depth: L2 = LC 1.9 mm 2 4xD on NC machines and automatic machines.

5 mm Corner radius R1: 0. D6: 1.

Round Die, HSS, M3X0.

optimized flute geometry and patented face geometry for reliable chip evacuation in steel materials and cast material. Robust drill design and optimized special point geometry for the best possible chip formation and reliable chip breakage with higher feed rates at the same time.

04 mm Feed fz for slot milling in steel < 900 N/mm2: 0.. For HB shanks use order no.

No. Tolerances: Corner radiusRS1 = 0.5 tolerance ±0. of teeth Z: 4 Shank: DIN 6535 HA to h6 Balance quality with shank: G 2.

.