Lead Taper Is Suitable Also For Blind Holes.

Lead taper is suitable also for blind holes.

Application: For reaming through holes, as the chips are evacuated in the cutting direction..9: Manufacturing or cutting edge tolerance 0/+0. This ensures the highest concentricity.

Profile ground: High concentricity and pitch accuracy, drills for series production use.

Jobber drill set HSS No. Shank: Plain shank Number of cutting edges Z: 2 Drill range: 1 6 mm Number of drills: 51 Incremental steps of drills: 0.

Recommendation: When using the solid carbide 180 Deg drill it is absolutely essential for process reliability: when spot drilling on flat surfaces to drill a pilot hole 1xD using pilot drill No.

122736. Flute geometry for optimum chip evacuation. With 4 guide chamfers to stabilize the drill in the hole.

Application: Point angle 142 Deg so that the cutting edges of the following twist drill engage easily.

Note: Use the speed for the actual hole Dia.Solid Carbide NC Spotting Drill, 142 Deg, Uncoated, 3 mm Easy spot drilling and high shape accuracy of the Center hole. not generally the speed for the drill outer Dia.

Nominal Dia.

Solid Carbide Drill, Extra Short, Uncoated, 0.. and shank Dia.

Thread type: M Tool material: HSS E PM Standard: Manufacturer's standard Tolerance class: ISO 2X 6HX Thread pitch: 1.5 mm Overall length L: 200 mm Shank Dia.

5 Tap Thread Size, TiAlN Coated The 45 Deg helix angle of the flutes facilitates chip formation especially in ductile austenitic CrNi steels.HSS-E-PM Blind Hole Tap for Stainless Steels, Extra Long, M10-1. Advantage: Designed for tapping threads where access is difficult.

D1 = 0 / -0.01 mm.

Tolerances: Neck Dia.Suitable even for machining electrolytic copper.7 mm Overhang length L1 incl..

recess: 16 mm Recess Dia.

Tolerances: Corner radius: Radius contour = 0 / -0.5 mm Overhang length L1 incl.005 mm. D1 = 0 / -0.

recess: 25 mm Recess Dia.

For the highest demands regarding performance and precision in Fiber-reinforced composites, CRP, GRP, and graphite. e. D1: 0. of teeth Z: 2 Helix angle: 30 degrees Shank: DIN 6535 HA to h5 No.

is used afterwards.

Extra long version. Use the speed for the actual hole Dia. Exactly central ground point.

Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

With point geometry shape A from size 4 mm. Vaporized from 2.

A slim chisel edge and the special arrangement of the 4 guide chamfers ensure high positioning and alignment accuracy.

Clear reduction in cutting forces due to special cutter geometry. Developed for use with very high cutting speeds. Coating for best wear resistance even at high process temperatures.9 mm Outstandingly suitable for machines with low power output and high speeds.

For particularly deep or recessed holes.

Special 4-chamfer relief ground for very good guidance within the bore. Recommendation: Maximum drilling depth: L2 = LC 1.

A slim chisel edge and the special arrangement of the 4 guide chamfers ensure high positioning and alignment accuracy.

Note: Flute length LC = L2 + 1.

Ground flutes, with high concentricity.

Recommendation: Maximum drilling depth: L2 = LC 1. With point geometry shape S special Advantage: Ideal for drilling shallow holes approx. Particularly robust and strong due to strengthened core.3 mm 2 4xD on NC machines and automatic machines.