Hex Standoff, M3.5-14 Thrd Sz, Stainless Steel Passivated, 6.4 Mm Hex W

Hex Standoff, M3.5-14 Thrd Sz, Stainless Steel Passivated, 6.4 mm Hex W

Hex Threaded Standoff.

Hex Standoff, M4-14 Thrd Sz, Stainless Steel Passivated, 7.9 mm Hex W

Hex Threaded Standoff.

5x1-1/4 Wheel, Thermo Plastic Rubber Wheel, Threaded Stem Caster80

5" X 1-1/4" Wheel, Thermo Plastic Rubber Wheel, Threaded Stem Caster, 275 Lbs Capacity.

Up to 2 x D into solid material at very high feed rates and smooth cutting action.

Advantage: optimized flute form- eccentric relief ground- generous chip spaces. Master Alu PickPocket Solid Carbide Roughing End Mill, DLC Coated, 18 mm For roughing and finishing. Very high feed rates when plunging vertically.

Application: For roughing and finishing.

025 mm Feed fz for side milling in short-chipping aluminium: 0.03 mm Through-coolant: no Tolerance nominal dia : e8 No. of teeth Z: 3 Flute length Lc: 12 mm Overall length L: 57 mm Shank dia Ds: 6 mm Feed fz for slot milling in short-chipping aluminium: 0..

308881 309434, ER lock wrench No.

309650. With Balluffchip bore as standard. 309740.

309840: 40

Increased collar contact surface. Clamping Dia 40 with 4 tapped holes for drive blocks to DIN 2079.

Please specify required clamping Dia with order.

Collets, round profile in 1 mm increments.5 degrees Saw thread Standard: DIN 6341 Accuracy: Concentricity tolerances: D = 1 to 10 mm = 0.02 mm D = 10 to 30 mm = 0.03 mm D = 30 to 60 mm = 0.

With close tolerance jaw width.

Combination Wrench, 15 Deg, Chrome Vanadium Steel, 32 mm Standard: DIN 3113 A / ISO 3318 / ISO 7738 Material: Chrome vanadium steel, phosphated. wrench length L: 360 mm maximum jaw height h1: 14 mm maximum ring height h2 max: 21 mm With oval shaft. Drop-forged.

Standard: DIN 896 B Material: Heat-treatable steel tube, chrome-plated.

.Tubular Box Wrench, 55mm x 60mm overall length: 240 mm Hole for tommybar : 21 mm Made from thin-walled heat-treatable steel tube, with cross-hole for tommy bar.

in inches A/F, BSF, BSW and rounded heads can be tightened or loosened using the Surface Drive.

g..3/8 inch Drive Socket, with Surface Drive, 6 pt, 22 mm Internal square to DIN 3120.

Standard: DIN 3110 / ISO 3318 Material: Chrome vanadium steel, chrome-plated.

610950: Size 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x26, 27x32, 30x34, 36x41 Supplied with: 1 each double open ended wrench No. Double Open End Wrench Set, 13 Pc, 6X7 mm to 36X41 mm.With close tolerance jaw widths. With oval shaft.

For safety reasons must always be secured using a suitable locking pin and O-ring.

Square drive: 3/8 in drive output end: 27.5 mm Length: 30 mm Material: Chrome molybdenum steel, surface burnished.

5in BUTT-WELD LONG TEE - POLISHED -316L

WAYLAND W67W-5-7 5in BUTT-WELD LONG TEE - POLISHED -316L.

Clamping Pin W Adapter Plate D=28, L=96, B=52 Form:C, Steel Blk Oxidized, Comp:Steel Blk Oxidized

KIPP K1506.0228 Clamping Pin W Adapter Plate D=28, L=96, B=52 Form:C, Steel Blk.

2-1/2 X 1-1/2 SS316 HEX BUSH

316 Stainless Steel Hex Bushing, FNPT x MNPT.2-1/2" x 1-1/2" .

1/2 BRZ MALE ADAPTER NL

1/2" No Lead Bronze Insert x MNPT Adapter.

300 lb weight capacity.

.Lenox Steel Armless Guest Chair Metal Frame, Bronze, OH Wine Upholstery Heavy duty steel construction, durable powder-coat finish, and a Matrex seat support system provide long-life comfort in commercial waiting and reception applications. The Lenox Steel armless guest chair with its graceful transitional styling, gently sloped arm design, and upholstered seat and back cushions will give your space a light, airy look.

Features include sturdy steel construction, durable powder coat finish, comfortable Matrex seat support system, and ergonomically designed back.

The Newport oversize guest chair with its bold, contemporary styling, sloped arm design, and upholstered seat and back cushions will give your space an inviting, welcoming air.