384 in, Drive Size 5/16 in, Pack Size Bulk, System of Measurement Inch, Application Steel and Steel Studs, Head Color Silver, Package Quantity 3000.163 in, Washer Outside Diameter 0.

Marine Centrifugal Pump, Pump Housing Material Plastic, Horsepower 1/10 hp, Nameplate Voltage 115V AC, Flow Rate @ 1 ft of Head (Maximum) 868 gph, Flow Rate @ 5 ft of Head (Maximum) 745 gph, Flow Rate @ 10 ft of Head (Maximum) 580 gph, Flow Rate @ 15 ft of Head (Maximum) 240 gph, Maximum Feet of Head 18 ft, Compatible Intake Pipe Size 3/4 in, Compatible Discharge Pipe Size 1/2 in, Intake Type NPT, Discharge Type NPT, Cord Length 6 ft, Motor Sealing Oil-Filled, Amps 3.

37 fl oz, Container Type Tube, Full Cure Time 1 day, Cure Type Room Temperature, Maximum Gap Fill Size 0.RTV Gasket Maker, Color Copper, Container Size 2.

Leveling Foot,4.73" H,2,698 lbf,3/4-10 Male-End Leveling Mount, Leveling Mount Type Swiveling Stud, Base Dia.

Receptacles,Tamper-Resistant,Midnight.

Lighting Dimmer, Lighting Technology Low Voltage, Switch Type 1-Pole, Operating Voltage 120V AC, Load Rating @ 120V AC 450W (MLV), Switch Style Rocker On/Off, Slide Dimming, Neutral Required No, Color Ivory, Load Rating @ 277V AC Not Applicable, Dimming Method MLV/Forward Phase, Dimming Type Full Continuous Dimming, Includes Wall Plate Wall Plate Not Included, Series Skylark, Number of Gangs 1, Compatible with Series Claro, Ballast Type Magnetic Low Voltage Transformer, Includes Wire Nuts.

Switches,Mechanical,Gen Purpose,Biscuit.

.Pegboard Hooks,9" Pegboard Hook Pegboard Hooks,9 In.

Corrosion-Resistant Modular Aluminum General Purpose Hand Truck, Load Capacity 500 lb, Overall Depth 18 1/2 in, Overall Height 55 in, Overall Width 17 1/2 in, Nose Plate Depth 7 1/2 in, Nose Plate Width 14 in, Nose Plate Type Open Straight, With Wheel Fenders, Frame Type Flat Back, Handle Type Continuous Frame Dual Loop, Axle-Mounted Wheel Dia.General Purpose Hand Truck,55 In..

Hand Truck Sealed Ball Bearing, Overall Depth 1/2 in, Overall Width 1 1/2 in, Overall Height 1 1/2 in, Color Silver/Red.

Self-Stabilizing Hnd Trk,51-7/8inHx21inW Ergonomic Tilt-Back Corrosion-Resistant Aluminum General Purpose Hand Truck, Load Capacity 500 lb, Overall Depth 19 in, Overall Height 52 in, Overall Width 20 1/2 in, Nose Plate Depth 7 1/2 in, Nose Plate Width 18 in, Nose Plate Type Open Straight, With Wheel Fenders, Frame Type Flat Back, Handle Type Continuous Frame Loop, Axle-Mounted Wheel Dia.

Makita 631801-1 Controller 100-130V.

Paint, Package Quantity 3.

0 kW Electric Wall & Ceiling Unit Heater, Overall Height 21 3/4 in, Overall Width 19 in, Overall Depth 12 3/4 in, Air Flow 1,320 cfm, Air Temp.

Motor, Voltage 208-230V, OEM Replacement Brand Berko, Dayton, QMark, Usable @ 208V Yes.

long twister is ideal for twisting wire bar ties from 0. It has a rotating head that can be adjusted between clockwise and counterclockwise rotation.

Phillips Pan Head Screw 1/8, Product Type Phillips Pan Head Screw, Compatible Manufacturer Model Number EI-20, EI-20K.

Lockout Padlock, Body Color Black, Body Height 1 7/8 in, Body Material Thermoplastic, Body Thickness 11/16 in, Body Width 1 3/8 in, Header Danger, Horizontal Shackle Clearance 5/8 in, Key Style Standard, Key Type Keyed Alike, Non-Removable Key Yes, Resistance Properties Corrosion Resistant, Shackle Diameter 3/16 in, Shackle Height 1 1/2 in, Shackle Material Stainless Steel, Shackle Type Open, Vertical Shackle Clearance 1 1/2 in, Width Across Shackle 5/8 in, Includes (2) Keys, Labels.

Lockout Padlock, Body Color Yellow, Body Height 1 7/8 in, Body Material Aluminum, Body Thickness 3/4 in, Body Width 1 1/2 in, Header Not Applicable, Horizontal Shackle Clearance 25/32 in, Key Style Standard, Key Type Keyed Alike, Non-Removable Key No, Resistance Properties Corrosion Resistant, Shackle Diameter 1/4 in, Shackle Height 1 1/2 in, Shackle Material Boron Alloy, Shackle Type Open, Vertical Shackle Clearance 1 1/2 in, Width Across Shackle 25/32 in, Body Material Coating Anodized.

Steam Trap, Application Process Equipment, Blast Coils, Heat Exchangers, Steam Mains, Unit Heaters, Body Material Cast Iron, Condensate Capacity 7,600 lb/hr, Configuration C Pattern, Distance Between Inlet and Outlet Port 3 in, Float Material Cast Iron, Includes Air Vent Air Vent Included, Includes Strainer Strainer Included, Installation Orientation Horizontal, Manufacturer Series C, Maximum Capacity at Maximum Pressure Load 7,600 lb/hr at 15 psi, Number of Ports 2.

Mechanical Flowmeter, Product Type Water Meter, Accuracy +/-1.5 Percent, Connection Size 1 in, Connection Type NPT, Compatible Flow Material Water, Media Temperature - Maximum 105 Degrees F, Media Temperature - Minimum 35 Degrees F, Viscosity - Maximum 31 SUS, Voltage - Maximum 24V DC, Housing Material Brass, Rotor Material Plastic, O-Ring Material Natural Rubber, Seal Material Natural Rubber, Shaft Material Tungsten Carbide, Wetted Material Bronze, Thermoplastic, Standards AWWA C-708.

000 psi, Mounting Orientation Horizontal, Vertical, Seal Material Chrome, Cobalt, Max. 1" FNPT Bronze Swing Y Check Valve - Valves 550 Degrees F, Min.

,SS.Cam and Groove Coupler x MNPT 1-1/2 In.

D.

Adapter Pin Lug BR,2-1/2 In.FNSTx2 In.MNPT.

,50ft.,500lb, Coupling Lug Style Rocker, Fire Hose Type Single Jacket, Fitting Material Aluminum x Aluminum, Fitting Type NST x NST, Hose Color White, Hose Fitting A Material Aluminum, Hose Fitting A Type NST, Hose Fitting B Material Aluminum, Hose Fitting B Type NST, Hose Inside Diameter 1 1/2 in, Hose Length 50 ft, Hose Tube Material EPDM, Jacket Material Polyester, Maximum Working Pressure at 70F 225 psi, Burst Pressure 800 psi, Fitting Size 1-3/4 in x 1-3/4 in.Poly Fire Hose,AL NST 1-1/2 In.

Boss Ground Joint Female Iron,2-1/2 In.

.Boss Ground Joint,Female,SS,1 In.

Countersink, HSS, 12, 1/2, 100deg.

262 x .Reamer, PL, HSS, Thrd,.2470 x 3.