Of Teeth Z: 2 Flute Length Lc: 8 Mm Overhang Length L1 Incl.

of teeth Z: 2 Flute length Lc: 8 mm Overhang length L1 incl.

. New generation of high performance milling cutters in the HPC machining range. of teeth Z: 2 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h6 No.

D1: 0.95 mm Overall length L: 57 mm Shank Dia.

Special flute profile.

Dry machining possible on cast iron cooling lubricant not necessary.

HSS-E Tap for Cast Iron, M12-1..

Spiral fluted.

Solid Carbide Center Drills, Uncoated, 0.

122606 is necessary.

New generation of high performance deep hole drills in the HPC range..

ae max = 0.1xD for TPC machining.

. Master INOX Solid Carbide End Mill, with Chip Separators, DLC Coated, 14 mm Advantage: Lower pull-out forces due to reduced helix angle.

Precise concentricity for exact holes.

With form S point. High-performance HPC twist drills for high-alloy and high tensile materials. Recommendation: Maximum drilling depth: L2 = LC 1.

118800 size 14, 16, 18, 20, 22, 26 mm, 1 ejector pin, box.

.HSS Core Drill Set, TiAlN Coated, 14, 26 mm Supplied with: Set with 1 each HSS core drill No.

Application: High-precision countersink for chatter-free 90 Deg countersinking.

HOLEX Pro Steel: Exact machining results in manual and machine use. Attractive cost/benefit ratio. Optimum tool life thanks to TiALN high-performance coating.

Nominal Dia.

Solid Carbide Drill, Extra Short, Uncoated, 2.5 x DC. and shank Dia..

No.

Tolerance: Dimension S = Â±0. Ds: 16 mm Feed fz in steel < 900 N/mm2: 0.08 mm of teeth Z: 4 Shank: DIN 6535 HB to h6 Chamfer mill: 30 degrees No.of teeth Z: 4 Dimension S: 15.

With wear-resistant, ultra-smooth TiAlSiN high-performance coating for a long tool life combined with optimum bore quality and very low burr formation.

5 x DC.

343000-343530.

Special surface treatment, resulting in reduced tendency to edge build-up and improved chip evacuation. Note: For suitable reducing adapters for tools with MT shanks see No.HSS Jobber Drill, Uncoated, 22 mm Recommendation: Maximum drilling depth: L2 = LC 1.

Advanced micro-geometry, convex cutting edge and conical profile grinding to provide additional stability for the main cutting edge.

Robust drill design and optimized special point geometry for the best possible chip formation and reliable chip breakage with higher feed rates at the same time.5 x DC..

Advantage: optimized flute form, eccentric relief ground, generous chip spaces.

Note: A minimum oversize of 0. Up to 2xD into solid material at very high feed rates and smooth cutting action.

of teeth Z: 6 Helix angle: 45 degrees Shank: DIN 6535 HA to h6 No.

GARANT Diabolo: Special geometry, coating and carbide for hard machining.Diabolo Solid Carbide Torus End Mill, for Hard Steels, TiAlN Coated, 10/1.

No.

Dimensions according to factory standard and 50 Deg helix. Without dynamic twist pitch.

The latest generation of TiALN multi-layer coating.

Parameterized flute geometry for optimum chip formation and torsional rigidity Tolerance class ISO 3X/6GX. High-performance tap specially developed for good process reliability in stainless and acid-resistant steels and duplex materials. HSS-E-PM Blind Hole Tap for Stainless Steels, M24-3 Tap Thread Size, TiAlN Coated.