Clevis Foot LSN-125 Clevis Foot Lsn-125 With Spherical Bearing..

Solenoid Valve MEH-5/2-5,0-L-S-B Solenoid Valve Meh-5/2-5,0-L-S-B Midi Pneumatic, With Solenoid Coil And Manual Override, Without Socket..

Inscription Label Holder Ascf-H-L2-10V Corrosion Resistance Classification Crc=1 - Low Corrosion Stress, Product Weight=22 G, Materials Note=Conforms To Rohs, Material Label Holder=Pvc.

Connecting Cable Nebc-S1G25-K-2.0-N-S1G25 Electrical Connection=(* 25-Pin, * Plug Straight, * Sub-D / Sub-D), Cable Length=2 M, Cable Diameter=7 Mm, Cable Structure=Shielded, Protection Class=(* Ip40, * In Assembled Condition).

.

Solenoid Valve Cpe18-M3H-5/3Bs-Qs-10 High Component Density Valve Function=5/3 Pressurised, Type Of Actuation=Electrical, Width=18 Mm, Standard Nominal Flow Rate=1000 L/Min, Operating Pressure=-0,9 - 10 Bar.

Distributor Nedy-L2R1-V1-M8G3-U-0.5R Based On The Standard=En 61076-2-104, Design Structure=Y-Distributor With Cables On Both Sides, Distributor Type=2 To 1, Cable Identification=With Inscription Label Holder, Mounting Type=(* With Through-Hole For M2 Screw, * With Accessories).3L-M8G4-2.

Distributor Nedy-L2R1-V1-M8G3-N-M8G4 Based On The Standard=En 61076-2-104, Design Structure=Y-Distributor Without Cable, Distributor Type=2 To 1, Cable Identification=Without Inscription Label Holder, Mounting Type=(* With Through-Hole For M2 Screw, * With Accessories).

Round Cylinder Dsnu-3/4"-10"-Ppv-A Based On Din Iso 6432, For Proximity Sensing.

Compact Cylinder Dpdm-25-15-P-Pa Stroke=15 Mm, Piston Diameter=25 Mm, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends, Assembly Position=Any, Mode Of Operation=(* Single-Acting, * Pulling Action).

Standards-Based Cylinder DSBC-125-125-PPVA-N3 Standards-Based Cylinder Dsbc-125-125-Ppva-N3 With Adjustable Cushioning At Both Ends..

.

7P-St-E Mechanical Linear Drive With Piston Rod And Fixed Stepper Motor.7P-ST-E Electric Cylinder Epco-40-50-12.Electric Cylinder EPCO-40-50-12..

.Suction Cup Holder ESH-HA-6-G Suction Cup Holder Esh-Ha-6-G Without Height Compensator, Vacuum Connection At Top, Compensator Secured By Two Hexagonal Nuts.

Blanking Plate Cdb-1/2 For Unused Positions.

.

0% Per 100 M, Storage Temperature=-20 - 55 °C Servo Motor Emmb-As-80-07-K-S30Sb Ambient Temperature=-15 - 40 °C, Note On Ambient Temperature=Up To 60° C With Derating Of -1.

Solenoid Valve Vuvg-S10-P53C-Zt-M5-1T1L Valve Function=5/3 Closed, Type Of Actuation=Electrical, Valve Size=10 Mm, Standard Nominal Flow Rate=210 L/Min, Operating Pressure=-0,9 - 10 Bar.

.Compact Cylinder ADNGF-11/4"-2"-P-A Compact Cylinder Adngf-11/4"-2"-P-A According To Iso 21287, With Plain-Bearing Guide, Piston Rod Secured Against Rotation By Means Of Guide Rods And Yoke Plate.

Solenoid Coil MSFW-24-50/60-EX Pickup Time=10 Ms, Duty Cycle=100 %, Power Factor Cos {Phi}=0,7, Characteristic Coil Data=24 V Ac: 50/60 Hz, Pick-Up Power 9 Va, Holding Power 7 Va Solenoid Coil Msfw-24-50/60-Ex With Knurled Nut And Spring Washer..

.Proximity Sensor SMT-8G-NS-24V-E-2,5Q-OE Proximity Sensor Smt-8G-Ns-24V-E-2,5Q-Oe Magnetic, Contactless, For T-Slot.

Compact Cylinder Dpdm-20-50-Pa Stroke=50 Mm, Piston Diameter=20 Mm, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends, Assembly Position=Any, Mode Of Operation=Double-Acting.

.Membrane Air Dryer LDM1-D-MAXI-300 Membrane Air Dryer Ldm1-D-Maxi-300 Without Threaded Connection Plates With Frb Threaded Pin, For Dry, Clean Compressed Air.

Blanking Plug Npqp-P-S4-Fd-P10 Size=Standard, Container Size=10, Design Structure=Push/Pull Principle, Temperature Dependent Operating Pressure=-0,95 - 10 Bar, Operating Medium=Compressed Air In Accordance With Iso8573-1:2010 [7:-:-].

8 Mm.Fixed Restrictor Vffg-T-F6-11 Valve Function=Throttle Function, Mounting Type=Tapped, Operating Pressure=-0,9 - 10 Bar, Ambient Temperature=-5 - 60 °C, Size=For Ø 5.

On-Off Valve Ms9-Ee-Ng-V24-S-Vs Electrical, With Silencer, Direction Of Flow: From Left To Right Series=Ms, Size=9, Grid Dimension=90 Mm, Design Structure=Piston Slide, Type Of Actuation=Electrical.

.Slot Nut NSTL-25 Slot Nut Nstl-25 For Mounting Attachments.

Curved Radiator Hose, Dual ID Hose, Small ID in A 15, Large ID in B 175, Length in 17, Branch 0, SAE J20R4 Class D1, SAE J1684 Type EC SAE J20R4 Class D1, SAE J1684 Type EC.

Collet System ER Collet Series ER32 Shank Type Taper Shank Taper Size CAT40 Projection Decimal Inch 6 Improves rigidity and reduces vibration allowing for increased feed rates and increased tool life DIN coolant option standard All Ground Body CAT40 Premium Balanced to 30,000 rpm CAT50 Premium Balanced to 25,000 rpm Comes complete with certificate.

Countersink Type Three Flute Minimum Head Diameter mm 63 Maximum Head Diameter mm 25 Minimum Included Angle 90 Maximum Included Angle 90 Countersink Material Cobalt HSCO Cobalt Wide flutes provide good chip evacuation Positive cut Constant profile aids regrinding of the tool Selfcentering of the cutting mill three bearing points Virtually eliminates vibration.