reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Carriage Bolt, 1/2-13 x 3

Carriage Bolt, 1/2-13 x 3

Hot Dipped Galvanized..

    • Model: 17032501.

    Model: 17032501.

    A new propeller's hub and blades must be checked for sufficient lower unit and trim tab clearances before use. Type: B; Application: 20-30 HP . Fixed Hub Propeller Hardware Kit - Yamaha, Type B Special tools may be required to install Dual Props.

    • Exhaust Elbow Gasket, Dry Joint
    • Minimum steering cable bend radius: 5.9

    Minimum steering cable bend radius: 5.9

    M90 Universal Mach Performance Rotary Steering Cable, 11' Black Minimal feedback. Specifically designed for high performance and high efficiency applications, M90 Mach cable patented offers increased flexibility and durability with top quality materials and construction. Fast connect, simple installation, patented end fitting.

    • Color coded with a blue stripe.
    • The spirit levels are aligned in relation to the finished reference surface so that the bubble is centered in the middle of the marking lines once the horizontal position of the contact surface in the longitudinal direction is reached.

    The spirit levels are aligned in relation to the finished reference surface so that the bubble is centered in the middle of the marking lines once the horizontal position of the contact surface in the longitudinal direction is reached.

    GN2282-MSR-57-G-50-3 Screw-On Level GN 2282 screw-on levels are used to check the horizontal position of jigs, machines, devices, appliances and instruments.

    • GN431-36-M10-30 Wing Screw
    • JW Winco WN300.2-30-M6-40-OS Adjustable Lever, Zinc Die-Cast

    JW Winco WN300.2-30-M6-40-OS Adjustable Lever, Zinc Die-Cast

    .Made in the USA, WN 300.2 adjustable levers are the result of modern industrial design: glass fiber reinforced thermoplastic with molded-in stainless steel inlay and zinc plated components.

    • A positive lock is achieved in the operating position by way of a tapered seat located in the hub of the mechanism.

    A positive lock is achieved in the operating position by way of a tapered seat located in the hub of the mechanism.

    3 retractable handles are suitable when the handle must be withdrawn during automatic operation.

    • A typical example is push-on / push-off applications.

    A typical example is push-on / push-off applications.

    GN 615.1 spring plungers are used as locating devices, detent pins, pressure pins and ejectors.

    • The installation can be carried out from the back (type A) as well as from the operator’s side (type B).

    The installation can be carried out from the back (type A) as well as from the operator’s side (type B).

    GN 728 economical cabinet "U" handles are a low-cost alternative in metal.

    • JW Winco WN300.2-108-5/8X11-55-OS Adjustable Lever, Zinc Die-Cast

    JW Winco WN300.2-108-5/8X11-55-OS Adjustable Lever, Zinc Die-Cast

    2 adjustable levers are the result of modern industrial design: glass fiber reinforced thermoplastic with molded-in stainless steel inlay and zinc plated components..Made in the USA, WN 300.

    • GN431-30-M6-16 Wing Screw

    GN431-30-M6-16 Wing Screw

    Where a greater torque is required GN 431 wing screws are a better solution than knurled screws..

    • GN6335.4-SK-40-M8-25 Star Knob, Threaded Stud

    GN6335.4-SK-40-M8-25 Star Knob, Threaded Stud

    4 phenolic plastic hand knob features a steel, zinc plated threaded stud for a use in a range of clamping applications.GN 6335..

    • The clamping is done radially on the shaft or axle surface.

    The clamping is done radially on the shaft or axle surface.

    GN705-15-A Set Collar Steel, Slotted Together with a dimpled hole or a groove on the shaft diameter, the shaft collars can be positioned exactly and, at the same time, damage to the clamping point can be avoided..

    • They have proven to be ideal wherever parts have to be clamped in a confined space or in a particular lever position.

    They have proven to be ideal wherever parts have to be clamped in a confined space or in a particular lever position.

    .JW Winco GN126-120-M10-SR Adjustable Lever GN 126 flat adjustable tension levers are characterized by their low height and the timelessly elegant design.

    • GN52.4-AN-20-M6-E Retaining Magnet, Rod Shaped
    • for conveyors.

    for conveyors.

    They also act as sound dampers.

    • WINCO 33-80-5/8X11-54-B1-X Gn33-80-5/8X11-54-B1-X Leveling Feet

    WINCO 33-80-5/8X11-54-B1-X Gn33-80-5/8X11-54-B1-X Leveling Feet

    Gn33-80-5/8X11-54-B1-X Leveling Feet J.W.

    • Used for actuating the material flow through hydraulic valves via the lever handle or, used as control levers for on / off, start / stop applications where the lever handle is attached to set collars, split hubs, or eccentric cams, are example uses of these standard parts.
    • The grooved lever arm provides the user with a better grip when operating the mechanism.

    The grooved lever arm provides the user with a better grip when operating the mechanism.

    GN 612 cam action indexing plungers are best utilized in applications where the pin may need to be retracted periodically.GN612-6-M12X1.

    • This tapped insert type allows for expanded applications requiring, for example, extra long threaded pins.

    This tapped insert type allows for expanded applications requiring, for example, extra long threaded pins.

    . GN 806 soft protective caps can be used with hex head cap screws.GN806-12-A Protective Cap A typical application is their use in conjunction with toggle clamps as stopper bolts or clamping units.

    • The beveled edges of the latch arm create a smooth latching of the door.

    The beveled edges of the latch arm create a smooth latching of the door.

    JW Winco GN115-SUK-40-SW Cam Latch GN 115 cam latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm behind the door frame..

    • These set screws can also be used with a variety of different hand operating components, such as levers, hand knobs, star knobs, and knurled nuts.
    • These set screws can also be used with a variety of different hand operating components, such as levers, hand knobs, star knobs, and knurled nuts.
    • The latching action is in a radial direction to the axis of rotation, resulting in a wide variety of different uses.

    The latching action is in a radial direction to the axis of rotation, resulting in a wide variety of different uses.

    8 cam latches with hook and latch bracket are mainly used for sliding doors and flaps.JW Winco GN115.8-SCT-18-H1-SW-1 Cam Latch, Hook Style GN 115..

    • The tip diameter of these grub screws is smaller than the diameter of the threaded stud, allowing them to be screwed into position from the tip side.

    The tip diameter of these grub screws is smaller than the diameter of the threaded stud, allowing them to be screwed into position from the tip side.

    DIN6332-M16-125-SK Grub Screw Hardened The thrust point of DIN 6332 grub screws is designed to be used with or without the thrust pad for clamping..

    • The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces.

    The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces.

    GN605-M8-20-BN Socket Set Screw Socket set screws with safety twist ball (types V and VR) are designed so the flat faced ball cannot twist more than a maximum of 9 degrees. Indentation on the workpiece is eliminated and the workpiece does not alter its position during clamping.

    • There are no loose components since all are assembled and mounted in their correct order.

    There are no loose components since all are assembled and mounted in their correct order.

    GN 927 clamping levers with eccentrical cam are used for rapid clamping and releasing operations.. The lever has been designed to ensure that its movement cannot exceed the maximum clamping position.

    • Acrylic Waterproof Pressure Sensitive Adhesive.

    Acrylic Waterproof Pressure Sensitive Adhesive.

    Grip Guard Comfort Grip Anti-Slip Safety Tape. Grip Guard Comfort Grip Features: Guard Against Slips & Falls.Easily Trimmable.

    • PREVIOUS 76956 76957 76958 76959 76960 76961 76962 76963 76964 76965 76966 76967 76968 76969 76970 76971 76972 NEXT