3 mm, Nominal Width 1 mm, Actual Inside Dia. O-Ring, Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Metric, Cross Section Shape Round, O-Ring Material Buna N, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.

Range -80 Degrees to 450 Degrees F, FDA Approved FDA Approved 10 mm, Temp. 7 mm, Actual Width 1.

Buna-N O-Ring, 3mm Wide 25.2 mm, Actual Width 3 mm, Dash Number Not Applicable, Color Black, Durometer 70A, Nominal Outside Dia. Range -40 Degrees to 250 Degrees F, FDA Approved FDA Approved 31.2mm ID, PK50.

O-Ring,Dash 218,Neoprene,0. O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Neoprene, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.13 In.,PK100.

O-Ring,Dash 904,Viton,0.

Pipe, Application Air, Natural Gas, Non-Potable Water, Oil, Steam, Finish/Coating Black, Fitting Compatibility Class 300, Gravity Flow No, Inside Diameter 2 7/8 in, Manufacture Location Globally Sourced, Material Steel, Material Grade Grade B, Maximum Operating Pressure 1507 psi @ 650 Degrees F, Maximum Operating Temperature 600 Degrees F, Maximum Steam Pressure 1507 psi @ 650 Degrees F, Metal Pipe Construction Welded, Minimum Operating Temperature -20 Degrees F, Nominal Pipe Size 3 in.

Supply Stop Extender Tee, Application Non-Potable Water, Potable Water, Fitting Side A Connection Type Compression, Fitting Side B Connection Type Compression, Fitting Side C Connection Type Compression, Fitting Material Brass, Fitting Side A Tube Outer Diameter 3/8 in, Thread Size D 9/16-24, Thread Size C 9/16-24, Thread Size B 9/16-24, System of Measurement Imperial, Maximum Operating Pressure 125 psi, Maximum Operating Temperature 160 Degrees F, Overall Length 1 5/8 in.

Retractable Cord Reel, Voltage 600V AC, Retractable Cord Ending Flying Lead, Retractable Cord Length 50 ft, Reel Color Yellow, Wire Size 10 AWG, Cord Color Black, Retractable Cord Ending Configuration Flying Lead, Trade Designation SOW-A, Number of Conductors 4, Feeder Cord Ending Flying Lead, Location Outdoor.

026 in, Overall Width 2 in, Tensile Strength 1,500 psi, Texture Smooth, Overall Thickness 0.25 in, Abrasion Resistance Good.

Rubber Sheet, Sheet, Adhesive Type Acrylic, Backing Type Adhesive, Color Black, Durometer 60A, Grade Standard, Material Neoprene, Standards ASTM D2000 BC 607, Maximum Adhesive Temperature 230 Degrees F, Maximum Temperature 250 Degrees F, Minimum Adhesive Temperature -30 Degrees F, Minimum Temperature -30 Degrees F, Overall Length 36 in, Thickness Tolerance +/-0.375 in, Abrasion Resistance Good.

017 in, Overall Width 12 in, Tensile Strength 1,200 psi, Texture Smooth, Overall Thickness 0.Rubber Sheet, Sheet, Adhesive Type Acrylic, Backing Type Adhesive, Color Black, Durometer 30A, Grade Standard, Material Neoprene, Standards ASTM D2000 BC 310, Maximum Adhesive Temperature 230 Degrees F, Maximum Temperature 250 Degrees F, Minimum Adhesive Temperature -30 Degrees F, Minimum Temperature -30 Degrees F, Overall Length 36 in, Thickness Tolerance +/-0.125 in, Abrasion Resistance Good.

Danger Sign, Sign Subject Matter Fall Protection, Height 7 in, Width 10 in, Sign Material Plastic, Sign Mounting Style With Mounting Holes, Header Danger, Legend Safety Harness Required, Printed Language English, Sign Shape Rectangle.

002 in, 4 in Overall Width, Width Tolerance +/-0.002 in, 0.

75 in Thickness, Thickness Tolerance +/-0.

062 in, Weight 1 lb, Melting Temperature (Minimum) 360 Degrees F, Melting Temperature (Maximum) 460 Degrees F, Flux Type Acid, Solder Series 40/60, Application Auto Radiators, Metal Gutters, Sheet Metal, Tin Repairs, Container Type Spool, Flux Requirement Contains Flux Core, Standards ASTM B-32.Solder Wire, Form Flux-Cored Wire, Material Composition 40 Percent Tin, 60 Percent Lead, Wire Diameter 0.

, Stainless Steel Conveyor Roller Material, 16 ga Roller Gauge, Medium-Duty, 260 lb Roller Load Capacity, Hex Axle Shape, 7/16 in Axle Size, Motorized No, Corrosion Resistant Roller Performance.Replacement Roller, 21 in For Between Frame Width, 1 15/16 in Roller Dia.

Replacement Roller, 36 in For Between Frame Width, 1 15/16 in Roller Dia., Steel Conveyor Roller Material, 16 ga Roller Gauge, Medium-Duty, 309 lb Roller Load Capacity, Hex Axle Shape, 7/16 in Axle Size, Motorized No, Cushioned-Ride High Performance Roller Performance.

93 in, Number of Links 24, Style Open, Type Varitrak(R) Heavy Duty Steel.

Heavy Duty Corner Brace,5/8" Hx2" L.

156 in, Dimensional Standards ASME B18.4, SAE J933, For Maximum Material Thickness 1/32 in, Pack Size Small, Minimum Head Height 0.

Nipple, Application Air, Natural Gas, Non-Potable Water, Propane, Steam, Fitting Compatibility Schedule 40, Gravity Flow No, Inside Diameter 3 1/16 in, Material Stainless Steel, Material Grade 304, Maximum Operating Pressure 770 psi, Maximum Operating Temperature 650 Degrees F, Metal Pipe Construction Welded, Minimum Operating Temperature -20 Degrees F, Nominal Pipe Size 3 in, Outside Diameter 3 1/2 in, Overall Length 12 in, Pipe Weld Type Continuous Weld, Schedule Schedule 40.

1, Head Type Hex, Min.-16, Fastener Length 1 1/2 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse), Fastener Thread Style Partially Threaded, Fastener Industry Standards ASME B18.

12 in, Thread Size 5/8 In.Square Tube End,5/8-11 Thread Tube End Leveling Mount, Tube Wall Size 0.

75" L Heavy Duty Cable Tie NAT PK 500.Bundle Dia. 1. 8.

Door Catch, Grab, Pull, Adjustable No, Non-locking, Catch/Latch Material Plastic, Catch/Latch Finish Black Plastic, Catch/Latch Height 1 15/16 in, Catch/Latch Width 1 1/8 in, Catch/Latch Depth 9/16 in, Pull Force 3 lb.

573 in, Extended Pin Diameter 0.652 in, Centerline to Hole Center 0.

It can be used for solid and stranded cables, and has a capacity of 20 to 10 AWG. 6 1/4 in Wire Stripper 20 to 10 AWG The wire stripper features a cushion grip molded surface that provides maximum comfort while in use.

.Control Transformer, 150 VA, Not Rated, 55°C, 120V AC, 208V AC Control Transformer, Input Voltage - Transformer 208V AC, Output Voltage - Transformer 120V AC, VA Rating - Transformer 150 VA, Protective Device None, Enclosure Style - Transformer Open, Mounting - Transformer Foot, Phase - Electrical 1, Hz - Electrical 50 Hz, 60 Hz, Temp.

Solid Round Shank Nut Driver Set, Tip Size 1/2 in, 1/4 in, 3/8 in, 5/16 in, 7/16 in, Bolt Clearance 1 in, Shank Length 5 in, Ergonomic, SAE, Solid Round Shank, Fastener Holding No, ESD Safe No, Insulated Yes, Magnetized Tip No, Non-Magnetic Yes.

Sheet Stock, LDPE, Grade Standard, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 0.