Case W/foam Insert For 6UP Pistol-Graph.

4 mm Flute length Lc: 14 mm Overall length L: 36 mm Shank Dia. HSS-E jobber drill, TiAlN, Dia. Strengthened core taper.1 mm Feed f in stainless steel > 900 N/mm2: 0.

Center cutting teeth for plunging.

.HSS-PM Roughing End Mill, TiAlN Coated, 18 mm Economy version. Relief ground fine pitch knuckle form profile.

Economy version with standard flutes.

With point geometry shape A. Recommendation: Maximum drilling depth: L2 = LC 1. When drilling deep holes, evacuate chips from the hole frequently, and ensure adequate cooling. HSS Parabolic Drill, Extra Long, Uncoated, DIN 1870 R1, 20 mm Note: For suitable reducing adapters for tools with MT shanks see No.

Note: Suitable for use as a slot drill tolerance e8 or an end mill.

Larger flutes than multi-flute end mills good for soft material.

No.

. R1 > 1.

of teeth Z: 4 Helix angle: 30 degrees No.

No.048 mm Feed fz for copy milling in steel < 65 HRC: 0. Therefore can be used as a true 4-edge drill at all depths of cut.

Note: Flute length LC = L2 + 1.5 x DC.

8 mm Convex major cutting edges with defined honed edge ensure the drill has high stability and maximum load capacity. Cutting chisel edge with high centering accuracy due to strong core and special point geometry.

e8 No.

Solid Carbide Mini End Mill, Uncoated, 5 mm Through-coolant: no Tolerance nominal Dia.. Ds: 6 mm Shank form: HB Feed fz for slot milling in steel < 750 N/mm2: 0.

A slim chisel point and the special arrangement of the 4 guide chamfers ensure high positioning and alignment accuracy.

5 x DC. Polished flutes for good chip clearance.3 mm Outstandingly suitable for machines with low installed power and high speeds. Optimized micro-geometry for increased working life and performance capability.

Note: Flute length LC = L2 + 1.5 x DC.

A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and extremely wear-resistant coating. Straight major cutting edges and a special flute profile ensure good chip evacuation.Pro Steel Solid Carbide Drill, Plain Shank, TiAlN Coated, 8 mm The robust cutter geometry ensures high-performance drilling with good process reliability.

of teeth Z: 2 Helix angle: 45 degrees No.

No. Solid Carbide Ball Nose End Mill, for Aluminum, DLC Coated, 4 mm D1: 3..

Ds: 5 mm

Solid Carbide Ball Nose End Mill, Diamond Coated, 5 mm No..

Tolerances: Neck Dia.

of teeth Z: 2 Flute length Lc: 3 mm Overhang length L1 incl. of teeth Z: 2 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h5 No. Ds: 4 mm 0 / -0.

DC: 8 mm Flute length Lc: 19.54 mm Shank length Ls: 45 mm Overall length L: 82 mm Shank Dia.

Due to the irregular cutting edge spacing they achieve very smooth running and long tool life. Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials..

No.

Economy version.

Center cutting edge geometry for plunging.

Dynamic helical pitch of the flutes.

Dynamic helical pitch of the clamping slots ensure optimum chip evacuation and process reliability.5 mm Thread type: M Tool material: HSS E PM Standard: Works standard Tolerance class: ISO 2X 6HX Thread pitch: 2.High-performance tap, specially developed for aluminum and non-ferrous alloys. 17.