100 Pieces #10-32x1in Stainless Steel Phillips Flat Head Machine Screws Steel, 100PK

Phillips Flat Head machine screws have a flat top with a conical bearing surface andare commonly used in countersunk holes where the screw head must sit flush with the surface of the material..

Class 8.8 screws have greater tensile strength than classes 4.6, 4.8, and 5.8 cap screws.

.

Class 8.8 screws have greater tensile strength than classes 4.6, 4.8, and 5.8 cap screws.

8 Hex Cap Screws Zinc Clear, 5PK A Class 8..5 Pieces M10-1.8 Hex Cap Screw is a type of fastener that is made from medium carbon steel and heat-treated.

Class 8.8 screws have greater tensile strength than classes 4.6, 4.8, and 5.8 cap screws.

8 Hex Cap Screws Zinc Clear, 2PK A Class 8.5x120 Class 8.8 Hex Cap Screw is a type of fastener that is made from medium carbon steel and heat-treated.

Rivet nuts are internally threaded counterbored tubular rivets that can be anchored from a single side of the application.

165 Steel Small Flange Smooth Body Rivet Nut Zinc Clear, 25PK The Small Flange sits nearly flush with the surface after installation..25 .25 Pieces M8-1.

Rivet nuts are internally threaded counterbored tubular rivets that can be anchored from a single side of the application.

100 Pieces #8-32 .

They are used for connecting two pieces of wood and create tight joints and can still be removed easily.

125 Pieces #8x1in Phillips Round Head Wood Screws Zinc Clear, 125PK Wood screws are thread forming screws that have a gimlet point, and a sharp crested, coarse pitch thread..

1000 Pieces #10 18-8 Stainless Steel Flat Washers, 1000PK

.Flat Washers areflat and smooth and serve to incorporate spacing and distribute load when placed between a nut and bolt or screw.

You will likely find these bolts in wooden applications in carpentry, allowing you to attach metal to wood.

.

15 Pieces 5/16-18x1/2in Stainless Steel Cone Point Allen Socket Set Screw, 15PK

.Cone point set screws have a sharp, cone-shaped point that wedges into the contact material thus delivering the strongest torsional and axial holding power of all the set screw styles.

Once the threads get started, they will tap there way though the attaching materials.

.

250 Pieces M6-1.0x6 Class 45H Knurled Cup Point Allen Socket Set Screws Black Oxide, 250PK

.Alloy Knurled Cup Point Set Screws feature serrated ridges or knurls in the indented cup that bite into the contact material and effectively lock in place for a powerful grip that resists loosening caused by vibration.

They are designed to secure a fastener, most commonly a bolt, in place.This is achieved through a combination of compression and friction between the threads of the bolt and the threads of the nut.

.1250 Pieces #10-24 18-8 Stainless Steel Finished Hex Nuts, 1250PK Finished Hex Nutsare a type of fastener with a threaded hole.

The most common setup for these bolts would contain a Bolt, 2 Flat Washers, Hex Nut or Hex Lock Nut, and/or Split Lock Washer.

Made in the USA!.

2 Pieces 3/4-10x2in 18-8 Stainless Steel Coupling Nuts, 2PK

.

50 Pieces M3-0.5x16 Class 12.9 Alloy Button Socket Head Cap Screws Black Oxide, 50PK

.Button Socket Cap Screws have a rounded head profile which is ideal for safety use where other screws snag clothing or other items on moving machinery.

The thin edge of the cup end digs into the contact surface for high holding power.

.

50 Pieces M3-0.5x35 Stainless Steel A2 Phillips Pan Head Machine Screws, 50PK

.Phillips Pan Head machine screws have a pan-shaped head with a flat top and vertical sides and are commonly used in electronics.

This provides adequate bearing surface for nearly all applications where metals are being joined.

1/8in Dia 3/16in-1/4in 44 Grip - Dome Head Blind Rivets Steel/Steel Mandrel Zinc, 500PK Dome Head Blind Rivets have a lower profile head that is approximately twice the diameter of the rivet body..

Lag bolts have a sharp gimlet point and coarse threads for maximum holding force in wood, but due to their large diameter must be predrilled.

.25 Pieces 5/16-9x4in Hex Lag Screws A307 Grade A Zinc, 25PK Lag screws are generally used to connect heavy lumber and other materials that bear an intense load.

Lag bolts have a sharp gimlet point and coarse threads for maximum holding force in wood, but due to their large diameter must be predrilled.

25 Pieces 3/8-7x2-1/2in Hex Lag Screws A307 Grade A Zinc, 25PK Lag screws are generally used to connect heavy lumber and other materials that bear an intense load..