reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Twin-Piston Cylinder DGTZ-GF-20-90-P-A

Twin-Piston Cylinder DGTZ-GF-20-90-P-A

Twin-Piston Cylinder Dgtz-Gf-20-90-P-A Stroke=90 Mm, Adjustable End-Position Range/Length=10 Mm, Piston Diameter=20 Mm, Operating Mode Of Drive Unit=Yoke, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends.

    • Stroke=0,25 ", Piston Diameter=2", Based On The Standard=Iso 21287, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends, Assembly Position=Any

    Stroke=0,25 ", Piston Diameter=2", Based On The Standard=Iso 21287, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends, Assembly Position=Any

    .Compact Cylinder ADNGF-2"-1/4"-P-A Compact Cylinder Adngf-2"-1/4"-P-A According To Iso 21287, With Plain-Bearing Guide, Piston Rod Secured Against Rotation By Means Of Guide Rods And Yoke Plate.

    • Compact Cylinder DPDM-Q-6-5-PA

    Compact Cylinder DPDM-Q-6-5-PA

    Compact Cylinder Dpdm-Q-6-5-Pa Stroke=5 Mm, Piston Diameter=6 Mm, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends, Assembly Position=Any, Mode Of Operation=Double-Acting.

    • With Manual Condensate Drain.

    With Manual Condensate Drain.

    Service Unit LFR-1/4-D-MIDI-KC Size=Midi, Series=D, Actuator Lock=Rotary Knob With Lock, Assembly Position=Vertical +/- 5°, Grade Of Filtration=40 µm Service Unit Lfr-1/4-D-Midi-Kc Consisting Of Manual On/Off Valve And Filter Regulator, With Mounting Brackets.

    • Nominal Tightening Torque=9,05 Nm, Tolerance For Nominal Tightening Torque=± 20 %, Materials Note=(* Free Of Copper And Ptfe, * Conforms To Rohs)
    • Ambient Temperature=-10 - 40 °C, Storage Temperature=-20 - 60 °C, Relative Air Humidity=0 - 90 %, Conforms To Standard=Iec 60034, Insulation Protection Class=F
    • Stroke=15 Mm, Piston Diameter=20 Mm, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends, Assembly Position=Any, Mode Of Operation=(* Single-Acting, * Pushing Action)

    Stroke=15 Mm, Piston Diameter=20 Mm, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends, Assembly Position=Any, Mode Of Operation=(* Single-Acting, * Pushing Action)

    Compact Cylinder AEVU-20-15-A-P-A Compact Cylinder Aevu-20-15-A-P-A For Proximity Sensing, Piston-Rod End With Male Thread..

    • 10 Bar.

    10 Bar.

    Regulator Plate VABF-S2-1-R7C2-C-10 Width=42 Mm, Based On The Standard=Iso 5599-2, Assembly Position=Any, Pneumatic Vertical Stacking=Pressure Regulator For 4 Reversible, Controller Function=(* Output Pressure Constant, * With Secondary Exhaust) Regulator Plate Vabf-S2-1-R7C2-C-10 For Valve Terminal Vtsa, Standard Port Pattern To 5599-2, Up To Max..

    • Mini Slide DGSL-8-20-EA

    Mini Slide DGSL-8-20-EA

    Mini Slide Dgsl-8-20-Ea Stroke=20 Mm, Adjustable Endposition Range/Front Length=14,5 Mm, Adjustable Endposition Range/Rear Length=3,5 Mm, Piston Diameter=10 Mm, Operating Mode Of Drive Unit=Yoke.

    • With Manual Condensate Drain.

    With Manual Condensate Drain.

    Service Unit FRC-1/2-D-7-MIDI Size=Midi, Series=D, Actuator Lock=Rotary Knob With Lock, Assembly Position=Vertical +/- 5°, Condensate Drain=Manual Rotary Service Unit Frc-1/2-D-7-Midi Filter/Regulator/Lubricator Combination, Maximum Outlet Pressure 7 Bar, 40 µm Filter, With Metal Bowl Guard..

    • With Automatic Condensate Drain.

    With Automatic Condensate Drain.

    .Service Unit FRC-1/8-D-MINI-A-NPT Size=Mini, Condensate Drain=Fully Automatic, Grade Of Filtration=40 µm, Operating Pressure=2 - 12 Bar, Pressure Regulation Range=0,5 - 12 Bar Service Unit Frc-1/8-D-Mini-A-Npt Filter/Regulator/Lubricator Combination, 40 µm Filter, With Metal Bowl Guard.

    • T-Fitting NPFC-T-3R38-M

    T-Fitting NPFC-T-3R38-M

    T-Fitting Npfc-T-3R38-M Material Threaded Fitting=Nickel-Plated Brass, Container Size=10, Operating Pressure=-0,95 - 50 Bar, Operating Medium=Compressed Air In Accordance With Iso8573-1:2010 [-:-:-], Corrosion Resistance Classification Crc=1 - Low Corrosion Stress.

    • Workpiece Radius=40 Mm, Nominal Size=2,5 Mm, Suction Cup Diameter=50 Mm, Suction Cup Volume=17,6 Cm3

    Workpiece Radius=40 Mm, Nominal Size=2,5 Mm, Suction Cup Diameter=50 Mm, Suction Cup Volume=17,6 Cm3

    Suction Cup ESS-50-BT-M6 Suction Cup Ess-50-Bt-M6 Easily Interchangeable, Height Compensator For Suction-Cup Holder=10 Mm, Min.

    • Electric Cylinder EPCC-BS-25-150-2P-A

    Electric Cylinder EPCC-BS-25-150-2P-A

    Electric Cylinder Epcc-Bs-25-150-2P-A Size=25, Stroke=150 Mm, Stroke Reserve=0 Mm, Piston Rod Thread=M6, Reversing Backlash=100 µm.

    • Angle Compensation +/-=15 Deg, Assembly Position=Any, Design Structure=Ball Joint, Correlation To Suction-Cup Holder=Size 3, Operating Pressure=-0,95 - 4 Bar
    • Solenoid Coil And Socket Should Be Ordered Separately.

    Solenoid Coil And Socket Should Be Ordered Separately.

    Solenoid Valve MFH-5/3G-1/4-S-B-EX Valve Function=5/3 Closed, Type Of Actuation=Electrical, Width=32 Mm, Standard Nominal Flow Rate=1600 L/Min, Operating Pressure=-0,9 - 10 Bar Solenoid Valve Mfh-5/3G-1/4-S-B-Ex With Manual Override, Without Solenoid Coil Or Socket..

    • Mounting Bracket HR-D-R3

    Mounting Bracket HR-D-R3

    Mounting Bracket Hr-D-R3 Series=D, Corrosion Resistance Classification Crc=3 - High Corrosion Stress, Product Weight=73 G, Materials Note=Conforms To Rohs, Material Bracket=Steel.

    • Pneumatic Valve VL-5/3B-3/8-B

    Pneumatic Valve VL-5/3B-3/8-B

    Pneumatic Valve Vl-5/3B-3/8-B 5/3-Way Function, Centre Position Pressurised Valve Function=5/3 Pressurised, Type Of Actuation=Pneumatic, Width=40 Mm, Standard Nominal Flow Rate=2600 L/Min, Operating Pressure=-0,9 - 10 Bar.

    • With Manual Condensate Drain.

    With Manual Condensate Drain.

    Filter Regulator LFR-3/4-D-5M-MIDI-NPT Size=Midi, Series=D, Assembly Position=Vertical, Grade Of Filtration=5 µm, Condensate Drain=Manual Momentary-Contact Filter Regulator Lfr-3/4-D-5M-Midi-Npt With Metal Bowl Guard And Pressure Gauge, Degree Of Filtration 5 µm.

    • Filter LF-M7-D-5M-MICRO-H-B

    Filter LF-M7-D-5M-MICRO-H-B

    Filter Lf-M7-D-5M-Micro-H-B Without Threaded Connection Plate, Connector Thread In Housing, Semiautomatic Condensate Drain Size=Micro, Series=D, Assembly Position=Vertical +/- 5°, Grade Of Filtration=5 µm, Condensate Drain=Semi-Automatic.

    • Rotation Angle Adjustment Range=0 - 270 Deg, Stroke=25 Mm, Piston Diameter=40 Mm, Swivel Angle=0 - 272 Deg, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends

    Rotation Angle Adjustment Range=0 - 270 Deg, Stroke=25 Mm, Piston Diameter=40 Mm, Swivel Angle=0 - 272 Deg, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends

    .Swivel/Linear Unit DSL-40-25-270-P-A-S20-KF-B Rotary And Linear Movement Can Be Actuated Independently Of One Another.

    • Hand Lever Valve VHEF-HS-B53E-N18

    Hand Lever Valve VHEF-HS-B53E-N18

    Hand Lever Valve Vhef-Hs-B53E-N18 Valve Function=5/3 Exhausted, Type Of Actuation=Manual, Width=20 Mm, Standard Nominal Flow Rate=530 L/Min, Operating Pressure Mpa=-0,095 - 1 Mpa.

    • Stopper Cylinder DFSP-Q-40-30-DF-PA

    Stopper Cylinder DFSP-Q-40-30-DF-PA

    Stopper Cylinder Dfsp-Q-40-30-Df-Pa Stroke=30 Mm, Piston Diameter=40 Mm, Piston Rod Thread=M8, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends, Assembly Position=Any.

    • is sold per foot.

    is sold per foot.

    01 lbs.77 in.Hose Sleeve Nylon .

    • Hanger Ball Bearing Unit, 1.6875 in Bore, Nickel Plated Hsg, Stainless Insert, Set Screw Locking

    Hanger Ball Bearing Unit, 1.6875 in Bore, Nickel Plated Hsg, Stainless Insert, Set Screw Locking

    Hanger Ball Bearing Mounted Unit, 1.6875 in Bore, Nickel Plated Housing, Stainless Steel Insert, Set Screw Locking.

    • Renown provides exceptional value on the industry's leading products with best-in-class industry partnerships that deliver the highest quality products every day.

    Renown provides exceptional value on the industry's leading products with best-in-class industry partnerships that deliver the highest quality products every day.

    Vacuum Bag for Panasonic U.Designed to fit: Panasonic upright Type U, U-3 and U-6 - fits all models series MC-/MC-V51**,52**,53**,55**, 57**, 62**, 63**, 66**, 67**, 68**, 69**, 73** **denotes digits 00 to 99 also fits: Riccar 4000 #C13 and Betco SM1400T and Mastercraft QC 1415 plus uprightEquivalent to OEM#: MC-115PT, MC-130P, MCV145M, MCV215, MCV234P, MCV145MT, MCV155M, 4501462-ply combination paper and melt blown micro filter3-vacuum bags per package More than just a brand name, Renown represents a customer-focused approach that extends beyond distribution to reducing your total cost of operation through product acquisition and utilization..Equivalent to MC-115PT, MCV215, MCV234P, MC-V145MT, 3PK Expertise you can count on.

    • 13.

    13.

    Features:Reversible Lever Fits Both Left and Right Handed DoorsConcealed ScrewsElegant Wave Styling and Decorative RoseANSI BHMA Grade 2 CertifiedSpecifications: Door Prep:Cross Bore 2-1/8Edge bore 1 Backset:Adjustable 2-3/8 or 2-3/4UL functions 2-3/4 standardor 2-3/8 optional Door Thickness:1-3/8 - 1-3/4 Doors standard. ANSI/BHMA:Grade 2 Certified ADA:Functions 720 and 788 satisfy section 4. Tustin Lever Left Hand Interior Dummy Handleset Trim in Polished ChromeTustin LeverKwikset Signature SeriesTustin's fashionable wave silhouette is the perfect complement to homes with inspired style.

    • Excellent for introducing the structure and function of the liver and gall bladder.

    Excellent for introducing the structure and function of the liver and gall bladder.

    .Model Human Liver on Stand Approximately 1/2 life size, shows right, left, caudate and quadrate lobes, gall bladder, bile duct, portal vein, hepatic artery, inferior vena cava and several impressions and ligamentsRemovable from base for handling and up close studyDurable, once piece construction will stand up to years of use26 structures are identified on included key cardFoot Print: 5 X 5"This model represents a human liver and shows main structures, including the 4 lobes, gal bladder, bile ducts and portal vein.

    • They provide a secure and precise connection between the drill chuck and the machine, ensuring accurate drilling operations.

    They provide a secure and precise connection between the drill chuck and the machine, ensuring accurate drilling operations.

    Drill chuck arbors are adapters used to mount drill chucks onto machine spindles or tailstocks..5MT Taper Shank #5 Jacobs Taper Chuck Arbor Drill chuck arbors are essential for accommodating various drill chuck sizes and machine interfaces in machining applications.

    • Black-oxide steel boss, plain or threaded hole, MR.63 A-M6-C31

    Black-oxide steel boss, plain or threaded hole, MR.63 A-M6-C31

    63 A-M6-C31.Black-oxide steel boss, plain or threaded hole, MR.

    • PREVIOUS 70628 70629 70630 70631 70632 70633 70634 70635 70636 70637 70638 70639 70640 70641 70642 70643 70644 NEXT