Precise Concentricity For Exact Holes.

Precise concentricity for exact holes.

5 x DC.

Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

. High concentricity and special chip flutes ensure precise bores.

The generation of a pilot hole improves process reliability.

With 135 Deg point angle and special fg6 cutting edge tolerance for optimum generation of deep holes.

optimized polygon geometry for a lower torque.

HSS-E-PM Master Form Steel Thread Forming Tap, #2-64 Tap Thread Size, TiAlN Coated DIN 2174 DIN 371 less than or equal to 3/8, DIN 376 7/16. HSS-E-PM substrate for exceptional process reliability. Form E lead-in 1.

Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

Specially treated surface, reducing edge build up and improving chip evacuation. With strengthened core.

Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

Specially treated surface, reducing edge build up and improving chip evacuation. HSS-E Jobber drill, Uncoated, 24 mm. Note: For suitable reducing adapters for tools with MT shanks see No. With point geometry shape C.

of teeth Z: 4 Helix angle: 45 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h6 Balance quality with shank: G 2.5 with HA No.

Sturdy roughing slot drills without knuckle profile.7 mm Overall length L: 62 mm Shank Dia..

Tolerance class: 7GX.

guide value: 3. Multi-layer HIPIMS coating for high wear resistance.optimized polygon geometry for a lower torque.

Strong spiral point for process stability at high cutting forces.

5 Tap Thread Size, TiCN Coated optimized honed cutting edges.HSS-E-PM Through Hole Tap, for High Tensile Strength Steels, M18-1.

Ds: 8 mm Shank form: HB Corner chamfer width at 45 Deg: 0.05 mm

Through-coolant: no Tolerance nominal Dia. e8 No. Double relief ground side clearance angle. Solid Carbide Mini End Mill, TiAlN Coated, 8 mm Note: Save on regrinding costs: It is cheaper to use solid carbide mini slot drills to the wear limit than to regrind them.

Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

112120, 112140 and 112170 with 142 Deg tip angle for enhanced process reliability.HSS Drill, Long, Uncoated, 4. Standard core thickness and core taper.

Shank Dia.

Solid Carbide HPC Micro Drill, TiAlN Coated, 2 mm High concentricity, precision ground for HPC applications in steel.

HSS-E-PM tool material for a high degree of wear resistance.

.HSS-E-PM Blind Hole Tap, M6-1 Tap Thread Size, AlTiX Coated Special geometry for optimum swarf evacuation. Universal taps designed for use in a wide spectrum of materials with high process reliability.

The core drill cuts only a thin material ring.

HSS Core Drill, Depth of Cut 55 mm, TiAlN Coated, 17 mm Supplied with: Without ejector pin. 19 mm. Very good cutting properties due to optimized cutting edge geometry.

Ds: 8 mm

Straight fluted, without profile distortion.01 mm.

of teeth Z: 3 Helix angle: 45 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HB to h6 No.

Advantage: optimized flute form, eccentric relief ground, wide chip space.03 No. Ds: 20 mm recess: 70 mm Recess Dia.

For slots or for milling pockets from the component Center.

End Mill for Aluminum, Uncoated, 14 mm Wide, fine ground chip flutes. Exceptionally fine component surface finish due to precisely ground cutting edges.. Center cutting edge geometry for plunging.

For slots or for milling pockets from the component Center.

. Center cutting edge geometry for plunging.End Mill for Aluminum, Uncoated, 20 mm Wide, fine ground chip flutes. Exceptionally fine component surface finish due to precisely ground cutting edges.

Ground flutes, with high concentricity.

HSS-E Stub Drill, TiN Coated, 3.3 mm 2 4xD on NC machines and automatic machines.5 x DC.

g.

.9 mm No interruption in the material structure so the drill is more resilient and suitable for arduous drilling tasks e. with hand held drills.5 x DC.