Scrubber Sponge, Material Polyester, Product Type Scouring Pad, Overall Length 9 in, Overall Width 6 in, Overall Height 3/8 in, Thickness 3/8 in, Antimicrobial No, Handle Material Not Applicable, Handle Color Not Applicable, Pad Color Green, Series Not Applicable, Standards Not Applicable, Application Multipurpose, Includes Handle No, Package Quantity 15.

.

Wardrobe Locker, Audit Trail Storage None, Frame Assembled Unassembled, Number of Tiers 2, Number of Units Wide 1, Door Type Solid, Frame Material Thickness 16 ga, Includes Number Plates Yes, Locker Color Dark Gray, Lock Type Padlock Hasp, Overall Depth 12 in, Overall Height 78 in, Overall Width 12 in, Handle Type Recessed Lift, Includes Number Plate, Locker Finish Powder Coated, Locker Material Steel, Number of Lockers 2, Opening Depth 11 in, Opening Height 34 in, Opening Width 9 1/4 in.

End Mill,Roughing,Co,TiAlN,5/16,4 FL,Sq Square End Mill, 5/16 in Milling Dia.., Cobalt, TiAlN, Weldon Flat, Length of Cut 1 3/8 in, Overall Length 3 1/8 in, Shank Dia.

Double Diaphragm Pump, Air Consumption (Maximum) 100 scfm, Air Intake Connection Size 1/2 in, Air Intake Connection Type NPT, Check Seat Material Polypropylene, Diaphragm Material Buna-N, Feet of Head (Maximum) 289 ft, Flow Rate (Maximum) 90 gpm, Manifold Connection Single Port, Media Discharge Connection Size 1 1/2 in, Media Discharge Connection Type NPTF, Media Discharge Location Center, Media Intake Connection Size 1 1/2 in, Media Intake Connection Type NPTF, Media Intake Location Center.

Roof Curb, For Fan Base Size 46 in, Curb Height 12 in, Curb Inside Width 41 1/2 in, Curb Outside Width 44 1/2 in, Material Steel, Standards UL 705, For Use With 46 in Square Base, Adjustability Fixed, Ventilation Type Nonventilated, Application General Exhaust, Curb Inside Length 41.5, Curb Outside Length 44 1/2 in, Curb Shape Square, Damper Tray Size 39 in x 39 in, Features Flashing Flange, One Welded Corner, Wood Nailer, Finish Galvanized, Flashing Flange Width 2 in.

6 in, Fastener Type Cable Tie, Header Wording (Reverse Side) No Header, Header Wording No Header, Height 7 in, Indoor/Outdoor Usage Indoor/Outdoor, Lamination Type Not Laminated, Language English, Mounting Hole Reinforcement Type Metal, Mounting Hole Size 3/8 in, Number of Tags 10, Preprinted Images (Reverse Side) Not Applicable.Tag, Compatible Tag Holder Mfr Part Number Not Applicable, Compatible Tag Insert Mfr Part Number Not Applicable, Fastener Attachment Length 6.

Replacement Kneee Pedal, Finish Stainless Steel, Overall Width 1/2 in, Stainless Steel.

Broom Head, Bristle Material Polyester, For Surface Texture Semi-Smooth, Sweep Face 16 in, Bristle Length 2 in, Bristle Color White, Block Material Polypropylene, Handle Color White, Handle Connection Type Threaded, Chemical Resistant Yes, Tool Type Broom Head, Block Depth 2 3/4 in, Block Width 16 1/2 in, FDA Compliant Yes, Acid Resistant Yes, Color Coding System Yes, Connection Thread Type European, Bristle Firmness Medium, Block Color White.

End Mill,XL,Carbide,3/16,4 FL,SGL Sq End Square End Mill, 3/16 in Milling Dia.., Carbide, Bright (Uncoated), Straight, Length of Cut 1 1/8 in, Overall Length 3 in, Shank Dia.

57 in.

Reduced Shank Drill Bit, Drill Bit Size 41/64 in, 118 Degrees Drill Bit Point Angle, Material - Machining High Speed Steel, Finish - Machining Black Oxide.

3, Classic No..

Double Diaphragm Pump, Air Consumption (Maximum) 20 scfm, Air Intake Connection Size 1/4 in, Air Intake Connection Type NPT, Check Seat Material Polypropylene, Diaphragm Material PTFE, Feet of Head (Maximum) 230 ft, Flow Rate (Maximum) 16.3 gpm, Manifold Connection Single Port, Media Discharge Connection Size 3/4 in, Media Discharge Connection Type NPTF, Media Discharge Location Side, Media Intake Connection Size 3/4 in, Media Intake Connection Type NPT, Media Intake Location Side.

50 in W x 6.5 in, Depth 6.Push Button Enclosure, Number of Columns 3, Number of Holes 6, NEMA Rating 12, 13, Conduit Size No Conduit Entrance Holes Provided, Dimensions 7.

Parts Retrieving Magnet, Compressed Length 5 in, Handle Style T-Handle, Includes T-Handle Release, Magnetic Pull Capacity - Maximum 5 lb, Product Type Parts Retrieving Magnet, Head Type Magnet, Magnet Type Rare Earth.

Instant Adhesive, Adhesive Color Black, Container Size 0.7 fl oz, Container Type Bottle, Cure Method Humidity, Maximum Viscosity 5000 cP, Minimum Viscosity 1,700 cps, Series 410, Built-in Dispenser Type No Dispenser/Applicator, Compatible Accelerator Loctite SF 712, Features High Viscosity, Materials Bonded Metal, Plastic, Rubber, Primary Applications Rubber, Standards 29 CFR 1910.

7 g/L, Viscosity 2 cps, Maximum Application Temperature 59 Degrees F, Primary Applications Speeds Cure, Base Solvent, Dry Time 30 to 70 sec.88 fl oz, Container Type Aerosol Can, Cured Color Green, For Use on Adhesive Type Anaerobic Adhesives, Product Type Activator, Specific Gravity 0.Primer and Activator, Container Size 0.79, Series SF 7649, Base Type Acetone-Based, Flash Point (F) -4 Degrees F, Standards ASTM D-5363, CFIA, MIL-S-22473E, NSF P1, NSF/ANSI 61, VOC Content Weight 11.

IEC Control Relay, Current Rating 10 A, Contact Form 3NO/2NC, Contact Rating (DC) 2 A @ 125/250/600V, Coil Voltage 24V AC, Contact Rating (AC) 10 A @ 120/240/480/600V, Relay Style IEC, Electrical Connection Screw Clamp, Mounting Style DIN Rail and Surface, Power Consumption 3 VA, IP Rating IP2X, Compatible with Series TeSys D Control Relays, Maximum Operating Temperature 140 Degrees F, Frequency 50/60 Hz, Body Depth 3.

Drain Cleaner, Cleaner Type Floor Drain, Container Type Bottle, Container Size 32 oz, Cleaner Form Liquid, Septic System Safe No, Garbage Disposal Safe Not Rated, Fragrance Floral, Product Label Drain Trap Liquid, Product Series Everprime(R), Ready to Use/Concentrated Ready to Use, Biodegradable Yes, Color Green, Compatible Pipe Material Metal, Plastic, Flash Point Greater Than 200 Degrees F, Maximum RTU Yield per Container 32 fl oz, NSF Rating Not Rated, Primary Chemical Food Grade Oil.

5, Fan Mounting Location Pedestal, Fan Accessory Style Quiet Design, Sound Level 72/65/57 dBA, Max. 105 Degrees F, Hz 60 Hz, Watts 300, Motor Type Permanent Split Capacitor, Drive Type Direct Drive, Outside Dia.

1, ANSI/BHMA A156.4, UL and cUL Listed, ADA Compliant Yes, Finish Aluminum Painted, Arm Material Carbon Steel, Arm Type Tri Pack, Color Gray, Exterior Door Width Up to 54 in.Door Closer, Stanley QDC 300 Closer Series, Interior and Exterior, Manual, Hydraulic, Closer Performance Standard Duty, Closer Type Non-Hold Open, Non-Handed, Ligature Resistant No, Closer Mounting Style Parallel, Regular, Top Frame, Standards ANSI A117.

Deadbolt Lock, Cylindrical, Commercial, Lockset Grade 2, Series QDB2, Lockset Finish Satin Chrome, Keyway Type Schlage C, Key Type Keyed Different, Standards ANSI A117.12, UL and cUL Listed, ADA Compliant Yes, Lockset Fire Rating 3 hr, Backset 2 3/4 in, Ligature Resistant No, Cylinder Double, Faceplate Dimensions 1-1/8 in x 2-1/4 in, For Door Thickness 1 3/8 in to 1 3/4 in, Includes Hardware, Material Brass, Number of Keys 2, Pins 6, Security Type Heavy-Duty.1, ANSI/BHMA A156.

Bulkhead Tank Fitting, Fitting Material Polypropylene, Fitting Material Finish Not Applicable, For Tank Shape Curved, Flat, Gasket Material FKM, Inside Connection Gender Female, Inside Connection Size 4 in, Inside Connection Type Threaded, Maximum Operating Pressure 150 psi @ 70 Degrees F, Maximum Operating Temperature 180 Degrees F, Minimum Operating Temperature 40 Degrees F, Number of Bolt Holes 0, Outside Connection Gender Female, Outside Connection Size 4 in, Outside Connection Type Threaded.

T-Slot Nut, Thread Size M16x2, High Speed Steel, Black Oxide, Overall Length 32 mm, Height of T 11.00mm, Nut Material Grade Grade 2, Overall Height 19 mm, Overall Width 29 mm, Table Slot Size 3/4 in, Tapped Through Tapped Through Hole Not Included.

Collet, For Shank Type Straight, For Use With RDT-85, SFT75.

The overall measurements are 17 7/8 in L x 11 1/8 in W x 6 in H, offering a volume capacity of approximately 0.

5 cfm, Minimum Flow Rate Not Applicable, Fitting Style Elbow, Body Material Finish Nickel Plated.

001 in, Diameter Tolerance - Maximum 0 in, Mounting Hole Center to Center Not Applicable, Mounting Hole Center to Shaft End Not Applicable, End Thread Length Not Applicable.Linear Shaft, System of Measurement Inch, Diameter 3/8 in, Shaft Type Solid Shaft, End Type Plain Ends, Core Type Solid, Overall Length 18 in, Surface Hardness - Minimum 50 HRC, Material Stainless Steel, Finish Polished, End Thread Size Not Applicable, Mounting Hole Thread Size Not Applicable, Diameter Tolerance - Minimum -0.

Battery Splice, Gauge 4 AWG, Package Quantity 10.