00 Percent, 1/4 in, Brass, Metal Handles, Revolving Hose Holders, Includes Kobra High Pressure Hose Set.Manifold Gauge Kit, Number of Valves 2, R-22, R-404, R-410A, Number of Hoses 3, 5 ft, 0 to 600, -30 to 500, +/-1.

Disinfectant Cleaner, Primary Chemical Quat, Container Type Jug, Container Size 1 gal, Ready to Use/Concentrated Concentrated, Recommended Dilution 1:128, 1:256, Fragrance Unscented, Cleaner Form Liquid, Surfaces for Use On Hard Nonporous Surfaces, Wet Contact Time 3 to 5 min, Targeted Pathogens Hepatitis B; HIV; MRSA, Product Series No Series, VOC Content 0 Percent, Flash Point 125 Degrees F, Rinse Required No, NSF Rating Not Rated, EPA Registered Yes, EPA Registration Number D001; D002.

8-Inch Work Boot, Style Family 8-Inch Work Boot, Metatarsal Guard Yes, ASTM Standards Met Compression (C/75), Impact (I/75), Closure Pull On, Chemical Resisting Sole No, Color Brown, Width M, Gender Men's, Heel Definition Flat Heel, Non Metallic Upper No, Non-Marking Sole No, Completely Non Metallic No, Oil Resisting Sole Yes, Construction Direct Attached, Electrical Hazard Rated Yes, Conductive No, Color Family Brown, Puncture Resistant Insole Yes, Size 4, Static Dissipative No.

105, Features Safe for Food Packaging, General Purpose, High or Adjustable Temperature, Works Well At Low Temperature, High Tack Yes, Low Odor Yes, Materials Bonded Fabric, Foam, Paper, Wood, Pressure Sensitive Yes.Hot Melt Adhesive, Color Clear, Diameter 7/16 in, Length 10 in, Melting Temperature 176 Degrees F, Product Format Smooth Sticks, Series 825, Working Time 65 sec, Maximum Viscosity 8,200 cps, Minimum Viscosity 1,200 cps, Electrically Insulating Yes, FDA Compliance 21 CFR 175.

7 gal - 10 gal Trash Bags, 24 in x 24 in, Super Heavy-Duty, 12 micron, Red Temperature Not Autoclavable, Package Configuration Coreless Roll, Rolls per Package 2, Bags per Roll 25 Biohazard Bags, Capacity 7 to 10 gal, Trash Bag Material HDPE, Thickness 12 micron, Color Red, Legend Infectious Waste, Bag Closure Type None, Width 24 in, Height 24 in, Max..

5 Degrees , Back Tilt Forward 10.5 Degrees , Number of Casters 5, Number of Glides 0, Foot Support Yes, Standards ANSI/BIFMA, CAL 117, ISO 5.

Bench Stool,Med,Vin,Bk Chrome,Cast,Blu.

Bench Stool,Med,Vinyl,Bk,Glides,Blu.

Labor Law Poster, Compliance Type Federal and State Labor Law, FMLA Notice Included Yes, Height 40 in, Language English, Material Plastic, Number of Posters Included 1, Product Type Poster, Subject Matter Labor Law, Subscription Length Not Applicable, Width 24 in, State/Province UT, Municipality Not Applicable, Workers Compensation Notice Included Not Applicable.

Labor Law Poster, Compliance Type Federal and State Labor Law, FMLA Notice Included Not Applicable, Height 40 in, Language Spanish, Material Plastic, Number of Posters Included 1, Product Type Poster, Subject Matter Labor Law, Subscription Length 1 yr, Width 24 in, State/Province ND, Municipality Not Applicable, Workers Compensation Notice Included Not Applicable.

Labor Law Poster, Compliance Type Federal and State Labor Law, FMLA Notice Included Yes, Height 40 in, Language Spanish, Material Plastic, Number of Posters Included 1, Product Type Poster, Subject Matter Labor Law, Subscription Length Not Applicable, Width 24 in, State/Province WI, Municipality Not Applicable, Workers Compensation Notice Included Not Applicable.

Product Type Assembly Components, Component Type Heat Reflector In.

Butterfly Valve, Lug Style, Body Material PVC, Max.Butterfly Valve, 6", PVC/FPM, Gear Operated, 316-SS Lugs 9 1/2 in, Lug Dia.

Butterfly Valve, Pneumatically Actuated, 2", PVC/FPM, Spring Return, includes 120v Solenoid Water Pressure 150 psi, Seat Material FPM, Number of Bolt Holes 4, Lug Dia.

56 in, Pitch Diameter 7.575 in.675 in, Hub Type One Side, Length through Bore 2 1/4 in, Standards ANSI B29.1, BIS, Teeth Heat Treatment Hardened Teeth, Tooth Width 0.

Heat Resistant Cloth, Cloth, For Use With Brazing, Equipment Protection, Smoldering, Stainless Steel Welding, Stress Relieving, Welding.

Sprocket, Bore Diameter 1 in, For Chain Pitch 3/4 in, For Number of Strands Single, Hub Type One Side, Material Steel, Maximum Bore Diameter 1 in, Number of Teeth 12, Outside Diameter 3.791 in, Includes Set Screws, Keyway Yes, Keyway Depth 1/8 in, Keyway Width 1/4 in, Length through Bore 1 1/4 in, Number of Set Screws 2.25 in, Pitch Diameter 2.

Roller Chain Sprocket, Bore Diameter 1 1/4 in, For Chain Pitch 1/2 in, For Number of Strands Single, Hub Type One Side, Material Steel, Maximum Bore Diameter 1 1/4 in, Number of Teeth 38, Outside Diameter 6.33 in, Pitch Diameter 6.716 in, Includes Set Screws, Keyway Yes, Keyway Width 1/4 in, Length through Bore 1 in, Number of Set Screws 2.

46 in, Pitch Diameter 4.

-16, Drill Bit Size Not Applicable, Minimum Material Thickness Not Applicable, ICC Approved for Cracked Concrete No, ICC Approved for Un-Cracked Concrete No, Seismic Approved No, Anchor Diameter 1/4 in, Manufacturer Location Made in USA.Rod Hanger, System of Measurement Inch, Mount Type Horizontal, Screw Size 1/4 in, Overall Length 1 in, Material Steel, Finish Zinc Plated, Drive Type External Hex, Maximum Load Capacity 622 lb, Compatible Material Wood, Compatible Rod Thread Size 3/8 In.

Angular Contact Ball Bearing, Bearing Industry Number 7318, Bore Diameter 90 mm, Cage Material PA66, Closure Open, Contact Angle 40 Degrees , Contact Bearing Type Angular Contact, Lubricant Material MT47 Grease, Matched Bearing Type Duplex, Maximum Speed 4,500 RPM, Maximum Temperature 100 Degrees C, Minimum Temperature -40 Degrees C, Number of Rows One, Outside Diameter 190 mm, Overall Width 43 mm, Ring Material Alloy Steel, System of Measurement Metric, ABEC Rating 3.

Tool Adapter, Color Red, Overall Height 1 1/2 in, Overall Length 5 3/8 in, Product Type Locking Cone, Overall Width 1 1/4 in, Material Nylon, Features Tapered for Press Fit/Friction Fit Tools, Includes Cone Adapter, Lock Type Lockable, Lockable Yes, Compatible Manufacturer Part Number RRSPC.

Self-Aligning Ball Bearing, Bearing Industry Number 1200, Bore Diameter 10 mm, Outside Diameter 30 mm, Outer Ring Width 9 mm, Ring Material Alloy Steel, Bore Type Cylindrical, Closure Open, Cage Material Thermoplastic, System of Measurement Metric, ABEC Rating 1, Ball Material Alloy Steel, Ball Material Grade 100Cr6, Bore Diameter Tolerance +0/-0.53 kN, Fillet Radius 1 mm, Lubricant Material Alvania Grease, Maximum Axial Load 60 lbf.008 mm, Dynamic Radial Load Capacity 5.

Duty Belt, Ultra, Duty Style, Size S, Width 2 in, Material Nylon, Color Black, Features Double-Layer, Injection Molded Belt Stays, Interior Polymer Stiffener Adds Support while Reducing Bulk, Patented Three-Button Buckle, Rigid Enough to Carry Gear Flexible Enough for Daylong Comfort, Material Nylon, Closure Style Buckle, Hook-and-Loop, Padded Yes.

Inline Water Filter, Reduces Chlorine Taste and Odor, Sediment, Micron Rating 10 micron, Flow Rate 0.5 gpm, Diameter 2 1/2 in, Overall Height 2 1/2 in, Service Life Not Rated, Filter Media Carbon, Maximum Temperature 100 Degrees F, Pipe Size 3/8 in, Application Refrigerator/Ice Maker, For Use With Ice-O-Matic Models, Standards NSF, NSF 42, Series IF.

-18, Fastener Length 2 1/2 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse), Fastener Thread Style Partially Threaded, Fastener Industry Standards ASME B18.1, Head Type Hex, Min.2.Not Graded, 5/16"-18 Hex Head Cap Screw, NL-19 18-8 Stainless Steel, 2-1/2 in L, 10 PK Hex Head Cap Screw, System of Measurement Inch, Basic Material Stainless Steel, Material Grade 18-8, Fastener Finish NL-19(SM), Dia.

Socket Head Cap Screw, Head Type Standard, System of Measurement Metric, Drive Type Socket, Drive Size 6 mm, Material Stainless Steel, Material Grade/Class 18-8, Finish NL-19, Thread Size M8-1.

Belt Barrier, Mounting Style Fixed Mounting Plate, Belt Length 13 ft, Belt Width 2 in, Belt Color Yellow, Belt Pattern No Pattern, Legend Danger Keep Out, Legend Color Black, Frame Color Black, Reflectivity Non-Reflective, Overall Height 16 1/2 in, Number of Belts 2, Indoor/Outdoor Usage Indoor, Includes Clip, Manufacturer Warranty Length 2 yr.

) 3-5/8 x 6-5/8 x 2-3/8, Voltage 9V DC, 318 MHz, For Use With (9) Doors, Includes 9V Battery, Visor Clip.Radio Transmitter, 9 Channel, Receiver Size (In.

Electronic Control Kit, For Use With SL22N30B-A.