Hex Cap Screws Feature A Washer Face Under The Head,which Creates A Better Seal When Applying Load.

Hex Cap Screws feature a washer face under the head,which creates a better seal when applying load.

2 Pieces 1/2-13x5in Hex Cap Screws Grade 5 Bolts Zinc Clear, 2PK The most common setup for these bolts would contain a Bolt, 2 Flat Washers, Hex Nut or Hex Lock Nut, and/or Split Lock Washer.

Their large bearing head design allows for significant distribution of weight and can also be used with oversized and irregular holes.

50 Pieces 5/16-18x5/8in Grade 5 Hex Flange Bolts Zinc Clear, 50PK Grade 5 Non serrated hex flange bolts have a smooth, non-rotating washer attached that does not bite into the surface it's being mounted to.

10 Pieces 3/8-16x2-1/4in Alloy Socket Head Cap Screws Black Oxide, 10PK

Socket Cap Screws are known for their high tensile strength and durability, and are commonly used in applications such as machinery, automobiles, and heavy equipment..

75 Pieces M3-0.5x16 Stainless Steel A2 Phillips Flat Head Machine Screws, 75PK

Phillips Flat Head machine screws have a flat top with a conical bearing surface andare commonly used in countersunk holes where the screw head must sit flush with the surface of the material.

Commonly used for automobiles, plumping, sheet metal, and electrical applications.

.200 Pieces M8x24x2.

Once the threads get started, they will tap there way though the attaching materials.

625 Pieces #12x1in Stainless Steel Phillips Pan Head Type A Self Tapping Screws, 625PK Self tapping screws only tap their own thread, so in most cases will require a pilot hole to get started..

50 Pieces M10-1.5x16 Class 45H Cone Point Allen Socket Set Screws Black Oxide, 50PK

.Cone Point Set Screws have a sharp, cone-shaped point that wedges into the contact material thus delivering the strongest torsional and axial holding power of all the set screw styles.

Their large bearing head design allows for significant distribution of weight and can also be used with oversized and irregular holes.

100 Pieces 3/8-16x5/8in Grade 5 Hex Flange Bolts Zinc Clear, 100PK Grade 5 Non serrated hex flange bolts have a smooth, non-rotating washer attached that does not bite into the surface it's being mounted to..

Hex Cap Screws feature a washer face under the head,which creates a better seal when applying load.

.1 Piece 5/8-11x5-1/2in Hex Cap Screws Grade 5 Bolts Zinc Clear The most common setup for these bolts would contain a Bolt, 2 Flat Washers, Hex Nut or Hex Lock Nut, and/or Split Lock Washer. Grade 5 Hex Cap Screws have 3 radial lines on the head, and can withstand a minimum of 120,000 PSI tensile strength.

Hex Cap Screws feature a washer face under the head,which creates a better seal when applying load.

25 Pieces 1-8x6in Hex Head Cap Screws Grade 8 Zinc Yellow, 25PK The most common setup for these bolts would contain a Bolt, 2 Flat Washers, Hex Nut or Hex Lock Nut, and/or Split Lock Washer. Grade8 Hex Cap Screws have6 radial lines on the head, and can withstand a minumum of 150,000 PSI tensile strength.

50 Pieces 5/8in USS Grade 8 Flat Washers Zinc Yellow, 50PK

.Flat Washers areflat and smooth and serve to incorporate spacing and distribute load when placed between a nut and bolt or screw.

Once the threads get started, they will tap there way though the attaching materials.

.500 Pieces #8-15x1-1/2in 316 Stainless Steel Phillips Pan Head Type A Self Tapping Screws, 500PK Self tapping screws only tap their own thread, so in most cases will require a pilot hole to get started.

2 Pieces M16-2.0x60 Stainless Steel A2-70 Hex Cap Screws, 2PK

A2-70 Stainless Steel Hex Cap Screws are hex head cap screws that have a minimum tensile strength of 700Mpa..They are often used in construction, machinery, oil and gas and many other industrial applications.

The most common setup for these bolts would contain a Bolt, 2 Flat Washers, Hex Nut or Hex Lock Nut, and/or Split Lock Washer.

25 Pieces 3/8in-16x1-1/4in Hex Cap Screws Grade L-9 Bolts USA Zinc Yellow, 25PK Grade L-9 Hex Cap Screws 180,000 PSI Min have 9 radial lines on the head, and on average are 17% stronger then Grade 8.

Theseare best used in tight or dark spaces where a machinist or fabricator must tighten the bolt blind.

.4 Pieces 3/4in-10x7in Square Head Bolts Grade A307 Hot Dip Galvanized, 4PK Square Head Bolts have square-shaped external wrenching heads, which offer a large bearing area for positive gripping.

Class 8.8 screws have greater tensile strength than classes 4.6, 4.8, and 5.8 cap screws.

15 Pieces M12-1.8 Hex Cap Screw is a type of fastener that is made from medium carbon steel and heat-treated.

500 Pieces 1/4in-20 18-8 304 Stainless Steel Hex Jam Nuts, 500PK

.Jam Nuts are typically half as tall as a standard nut and commonly used as a type of locknut, where it is jammed up against a standard nut to lock the two in place.

225 Pieces M8-1.25x50 Metric Stainless Steel A4-70 Socket Cap Screws, 225PK

.Socket Cap Screws are known for their high tensile strength and durability, and are commonly used in applications such as machinery, automobiles, and heavy equipment.

Their large bearing head design allows for significant distribution of weight and can also be used with oversized and irregular holes.

30 Pieces 1/4-20x1-1/4in Stainless Steel Phillips Pan Head Machine Screws Steel, 30PK

Phillips Pan Head machine screws have a pan-shaped head with a flat top and vertical sidesand are commonly used in electronics..

Grade L-9 Finished Hex Nuts.

Made in the USA!.

The flange serves to distribute the pressure of the nut over the part being secured.

250 Pieces 1/4-20x3-1/2in Grade 5 Round Head Square Neck Carriage Bolts Zinc, 250PK

.Grade 5 carriage bolts are used in manufacturing, construction, and industrial applications and will give your metal, wood, and plastic work an even and seamless finish.

Theseare best used in tight or dark spaces where a machinist or fabricator must tighten the bolt blind.

125 Pieces 5/8in-11x3in Square Head Bolts Grade A307 Hot Dip Galvanized, 125PK Square Head Bolts have square-shaped external wrenching heads, which offer a large bearing area for positive gripping..

Theseare best used in tight or dark spaces where a machinist or fabricator must tighten the bolt blind.

16 Pieces 3/8in-16x2-1/4in Square Head Bolts Grade A307 Hot Dip Galvanized, 16PK Square Head Bolts have square-shaped external wrenching heads, which offer a large bearing area for positive gripping..

Hex Cap Screws feature a washer face under the head,which creates a better seal when applying load.

250 Pieces 3/8-24x3/4in Hex Cap Screws Grade 5 Bolts Zinc Clear, 250PK The most common setup for these bolts would contain a Bolt, 2 Flat Washers, Hex Nut or Hex Lock Nut, and/or Split Lock Washer. Grade 5 Hex Cap Screws have 3 radial lines on the head, and can withstand a minimum of 120,000 PSI tensile strength..

Lag bolts have a sharp gimlet point and coarse threads for maximum holding force in wood, but due to their large diameter must be predrilled.

.50 Pieces 5/16-9x1in Hex Flange Lag Screws Steel Hot Dip Galvanized, 50PK Lag screws are generally used to connect heavy lumber and other materials that bear an intense load.

The most common setup for these bolts would contain a Bolt, 2 Flat Washers, Hex Nut or Hex Lock Nut, and/or Split Lock Washer.

Made in the USA!.1000 Pieces 5/16-24x1-1/2in Hex Head Cap Screws Grade 8 USA Zinc Yellow, 1000PK Grade 8 Hex Cap Screws have 6 radial lines on the head, and can withstand a minimum of 150,000 PSI tensile strength.

The thin edge of the cup end digs into the contact surface for high holding power.

5 Pieces 1/2-13x1-3/4in Stainless Steel Cup Point Allen Socket Set Screw, 5PK Cup Point Set Screws feature a hex drive at one end and a cup-shaped indentation at the other.

They are made from medium carbon steel, carbon boron, or medium carbon alloy steel.

25 Pieces 5/8-11x3in A325 Structural Hex Bolts Partial Thread Hot Dip Galvanized, 25PK A325 Structural Hex Bolts are marked A325 on the head andare commonly used for structural steel connections in heavy steel structures..