Tongs,Scallop, 9.5,Tan Hdl For

Tongs,Scallop, 9.5,Tan Hdl For - Part# 31016

Color: Tan ;Material: Stainless Steel ;Length: 9-1/2" | 241 Mm ;Width: 1-3/8" | 35 Mm ;Gauge: 20 ;Temperature Range: Up To 82 Degrees C | Up To 180 Degrees F ;Type: Scallop ;Nsf Certified: Y ;Haccp Compliant: Y.

Block,Pusher (7/16) For - Part# Blm45753-1

Size: 7/16" Cut | 11 Mm Cut.

Fitting,Brass , Supply Tube

Material: Brass ;Length: 1-1/2" ;National Pipe Thread: 1/2" Inlet ;Compression: 7/16" Outlet.

Jar & Lid Assy , 1/9 Sz,3.5D

Material: Polypropylene High-Impact | Stainless Steel;Hinged Lid ;Length: 6 7/8" Flange | 175 Mm Flange ;Width: 4" Flange | 102 Mm Flange ;Size: 1/9" ;Includes: Hinged Lid W/ Ladle Notch ;Depth: 3 1/2" | 89 Mm ;Nsf Certified: Y.

O-Ring, 00-067500-00034

;Weight: 0.02 Lb;Models Used In:;Hobart Warewashing Am15 Vl-2.

Grinder Plate - 3/8 For - Part# 00-812Gp 3/8

HOBART 00-812GP 3/8 Grinder Plate - 3/8" For - Part# 00-812Gp 3/8.

RELAY for Dean

; FRYMASTER; COMPUTER MAGIC II & III, LATCH VALVE RELAY OR HEAT RELAY; FRYER BIMH-(14,52), FPH250SD, FPH450CSD, G18FB; G24FB, GL(18FB,24FB), H(14,17, 22,214), MACH52; MJ45E, MJCFE W/COMPUTER MAGIC, MJH50..RELAY, (5 AMPS) (120V) (3/32" MALE; TERMINALS), 12VDC, GAS VALVE OR HEAT.

Stem Assembly.;New Style Has White Teflon Seal.;Stem Has Longer "Worm" Area Of 1-3/4" Long.;2" Stem For Groen Only, Square End Where Handle Goes On Is;Shorter Than #51-1434 (2" Stem), ;0.3" Square Knob Mount Shoulder X 0.25" Long,;10-24 Threads For End Nut.;6-1/16" Long.;Knob Handle Only Is # 22-1311;Wing Nut Only Is # 26-1015;For Faucet # 56-1082;Groen Kettle

Stem Assembly2" For - Part# Gr9048 Draw-Off Faucet 2" Dia..

Door Gasket 23 X 26-1/4

[ 23" X 26-1/4" ] [Rubber ] [ Type R] ;7/16" Mag, 3/4" Base, 7/16" High;Black [Snap-In Mount];True Tssu-48-12 115V, Tssu-48-8-47, Twt-48.

400 C Thermostat For - Part# M1481X

BAKERS PRIDE M1481X 400 C Thermostat For - Part# M1481X.

Tak170 Evap Coil For - Part# Tak17Ag

BOHN TAK17AG Tak170 Evap Coil For - Part# Tak17Ag.

Bearing - Flange Block

STERO 0P-661978 Bearing - Flange Block.

Lid, Ss Small Pan(806-1851) For - Part# 6012816

WASTE KING 6012816 Lid, Ss Small Pan(806-1851) For - Part# 6012816.

Switch Kit, Toggle, 20A, 2P-2Pole For - Part# 2-19-006

HATCO 2-19-006 Switch Kit, Toggle, 20A, 2P-2Pole For - Part# 2-19-006.

Brush, Tube, 1.25 Dia For - Part# Ht3-40-060-00

HATCO HT3-40-060-00 Brush, Tube, 1.25" Dia For - Part# Ht3-40-060-00.

Kit, Gas/Ocf Lov Temp Probe For - Part# 807-4817

DEAN 807-4817 Kit, Gas/Ocf Lov Temp Probe For - Part# 807-4817.

COOLING FAN for Sunkist

SUNKIST SF23080A2083HBL.GN COOLING FAN for Sunkist.

The contoured handle offers an extremely comfortable grip and allows uniform clamping pressure to be applied fully around the thread.

A shorter handle radius also helps to limit the horizontal space required to clamp in tight spaces.78" External Thread, 1. This new handle series was designed to work in tight space applications.Stainless Steel Adjustable Handle, T-Handle Design, #10-32 x 1.

Endmill, 3 FL Uncoated, 7/16, Length of Cut: 1

Endmill,3 FL Uncoated,7/16.

Attention - Designed to be used in parallel with a maximum of 4 identical batteries.

Weighing only 4. Having loose terminals will cause a buildup of heat resulting in damage to the battery. BMS provides all kinds of protection for the battery and customer, equipped with Over charge and short circuit protection.

Attention - Designed to be used in parallel with a maximum of 4 identical batteries.

Weighing only 8. Lighter, stronger and longer life span with 2500 cycles makes this the ideal battery for all your Deep Cycle applications such as, Solar / wind energy systems, Off Grid systems, RV, Camping, Backup power systems and much more.

The ML55-12 is an Absorbent Glass Mat AGM technology with a valve regulated design, that can be used in enclosed and indoor environments without leaking or maintenance, providing a superior performance for thousands of models.

. Delivering power when you need it, the Mighty Max ML55-12 12 Volt 55 AH uses a state of the art, heavy-duty, calcium-alloy grid that provides exceptional performance and service life in both float and cyclic applications.12V 55Ah SLA Replacement Battery compatible with SigmasTek SP12-55 Mighty Max SLA batteries are utilized in a wide variety of applications including; Consumer Electronics, Electric Vehicles, Engine Starters, Golf Carts, Hunting, Lawn and Garden Tools, Medical Mobility, Motorcycles, Power sports, Portable Tools, Solar, Toys and Hobby, Access Control Devices, Emergency Lighting, Security and more.

The ML55-12 is an Absorbent Glass Mat AGM technology with a valve regulated design, that can be used in enclosed and indoor environments without leaking or maintenance, providing a superior performance for thousands of models.

.12V 55Ah SLA Battery Replacement for SBS S12550 Mighty Max SLA batteries are utilized in a wide variety of applications including; Consumer Electronics, Electric Vehicles, Engine Starters, Golf Carts, Hunting, Lawn and Garden Tools, Medical Mobility, Motorcycles, Power sports, Portable Tools, Solar, Toys and Hobby, Access Control Devices, Emergency Lighting, Security and more. Delivering power when you need it, the Mighty Max ML55-12 12 Volt 55 AH uses a state of the art, heavy-duty, calcium-alloy grid that provides exceptional performance and service life in both float and cyclic applications.

The ML5-6S is an Absorbent Glass Mat AGM technology with a valve regulated design, that can be used in enclosed and indoor environments without leaking or maintenance, providing a superior performance for thousands of models.

Delivering power when you need it, the Mighty Max ML5-6 6 Volt 5 AH uses a state of the art, heavy-duty, calcium-alloy grid that provides exceptional performance and service life in both float and cyclic applications..

The ML9-12 is an Absorbent Glass Mat AGM technology with a valve regulated design, that can be used in enclosed and indoor environments without leaking or maintenance, providing a superior performance for thousands of models.

Delivering power when you need it, the Mighty Max ML9-12 12 Volt 9 AH uses a state of the art, heavy-duty, calcium-alloy grid that provides exceptional performance and service life in both float and cyclic applications.

Premium quality absorbed glass mat technology AGM is ideal for ATVs, Motorcycles, Personal Watercraft, Jet Ski's, Snowmobiles and more

YTX30L-BS 12V 30AH Replacement Battery for Apex APX30L-BS AGM and GEL batteries are lead-acid and of the same battery chemistry. This YTX30L-BS is a sealed lead-acid SLA absorbed glass mat AGM rechargeable battery. This battery comes already charged, sealed, maintenance free, and ready to install..