Solenoid Valve CPE24-M3H-3GLS-QS-10

Solenoid Valve Cpe24-M3H-3Gls-Qs-10 High Component Density Valve Function=3/2 Closed, Monostable, Type Of Actuation=Electrical, Width=24 Mm, Standard Nominal Flow Rate=1250 L/Min, Operating Pressure=-0,9 - 10 Bar.

Stroke=15 Mm, Piston Diameter=63 Mm, Based On The Standard=Iso 21287, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends, Assembly Position=Any

.Compact Cylinder ADNGF-63-15-P-A Compact Cylinder Adngf-63-15-P-A According To Iso 21287, With Plain-Bearing Guide, Piston Rod Secured Against Rotation By Means Of Guide Rods And Yoke Plate.

Stroke=0,75 ", Piston Diameter=3", Based On The Standard=Iso 21287, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends, Assembly Position=Any

Compact Cylinder ADNGF-3"-3/4"-P-A Compact Cylinder Adngf-3"-3/4"-P-A According To Iso 21287, With Plain-Bearing Guide, Piston Rod Secured Against Rotation By Means Of Guide Rods And Yoke Plate..

Installation Height=4000 M, Note On Max.

.0% Per 100 M, Storage Temperature=-20 - 70 Â°C Servo Motor Emmt-As-60-L-Ls-Rm Ambient Temperature=-15 - 40 Â°C, Note On Ambient Temperature=Up To 80Â°C With Derating -1.5%/Â°C, Max.Servo Motor EMMT-AS-60-L-LS-RM Installation Height=As Of 1,000 M, Only With Derating Of -1.

Spindle Axis EGC-120-100-BS-10P-KF-0H-ML-GK

Spindle Axis Egc-120-100-Bs-10P-Kf-0H-Ml-Gk With Recirculating Ball Bearing Guide Working Stroke=100 Mm, Size=120, Stroke Reserve=0 Mm, Spindle Diameter=25 Mm, Spindle Pitch=10 Mm/U.

Design Structure=Directly Actuated Poppet Valve, Type Of Actuation=Electrical, Sealing Principle=Soft, Assembly Position=Any, Mounting Type=Line Installation

.Solenoid Valve VZWD-L-M22C-M-N18-20-V-3AP4-40 Solenoid Valve Vzwd-L-M22C-M-N18-20-V-3Ap4-40 Directly Actuated, Npt1/8" Connection.

Sealing Ring Assortment VABD-P16-S

Sealing Ring Assortment Vabd-P16-S Corrosion Resistance Classification Crc=3 - High Corrosion Stress, Materials Note=(* Contains Pwis Substances, * Conforms To Rohs), Material Seals=Nbr.

Proportional Pressure Regulator VEAB-L-26-D2-Q4-V1-1R1

Proportional Pressure Regulator Veab-L-26-D2-Q4-V1-1R1 Valve Function=3-Way Proportional-Pressure Regulator, Type Of Piloting=Direct, Type Of Reset=Mechanical Spring, Type Of Actuation=Electrical, Assembly Position=Any.

Stroke=20 Mm, Piston Diameter=16 Mm, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends, Assembly Position=Any, Mode Of Operation=(* Single-Acting, * Pulling Action)

Compact Cylinder AEVUZ-16-20-P-A Compact Cylinder Aevuz-16-20-P-A For Proximity Sensing, Piston-Rod End With Female Thread..

Width=42 Mm, Based On The Standard=Iso 5599-1, Assembly Position=Any, Pneumatic Vertical Stacking=Throttle Plate, Exhaust Air Flow Control, Operating Pressure=-0,9 - 10 Bar

Flow Control Plate VABF-S1-1-F1B1-C Flow Control Plate Vabf-S1-1-F1B1-C For Valve Terminal Vtsa, Standard Port Pattern To 5599-1, 5599-2, For Mounting Between Manifold Sub-Base And Valve, For Restricting Exhaust Air Ports 3 And 5 On The Valve.

1/2 Drive Adjustable Torque Wrench 50-250

KT PRO G3462-2EG1 1/2" Drive Adjustable Torque Wrench 50-250.

Hem: Reinforced webbing sewn into perimeterSize: These Mesh Tarps are finished size and they may finish approximately +/- 2 in.

Our Black Mesh Shade Tarps are 6.8 oz. per square yard and includes brass grommets about every 18 inches, with resilient hems reinforced with webbing in the perimeter.

For: End milling, Slotting, Sinking On: Steels, Cast Iron, Aluminum, Copper, Brass, Plastics, and Abrasive type materials

0mm Diameter x 14mm Shank 3-Flute Regular Length Blue Series Carbide End Mills 3 flute carbide end mills offer maximum chip clearance therefore reducing chip packing..

For: End milling, Slotting, Sinking On: Steels, Cast Iron, Aluminum, Copper, Brass, Plastics, and Abrasive type materials.

1" Diameter x 1" Shank 3-Flute Regular Length Ball Nose Blue Series Carbide End Mills 3 flute carbide end mills offer maximum chip clearance therefore reducing chip packing..

TiAlN coating enhances speeds-feeds and tool life.

5/16" Diameter x 5/16" Shank 4-Flute Regular Length Roughing Yellow Series Carbide End Mills These fine pitch roughing end mills have an excellent flute design for roughing applications in a variety of materials..

Wear resistance and minimal deflection for excellent size control.

.0mm Diameter x 16mm Shank 4-Flute Regular Length Ball Nose Blue Series Carbide End Mills For: General purpose milling, Production milling, Contouring On: Steels, Stainless Steels The industry standard.

50mm Dia x 38 Shank 2Flute Regular Length HSCO Cobalt End Mill

Mill Diameter mm 5 Number of Flutes 2 Material Cobalt Length of Cut Inch 12 Shank Diameter Inch 38 FinishCoating Bright Single or Double End Single Center Cutting Yes Overall Length Inch 2516 Flute Direction Right Cutting Direction Right Variable Helix No Helix Angle 30 These end mills are furnished as regular with righthand cutting and righthand helical flutes All shanks are flatted for holder set screw Designed for slotting, drilling, pocketing and generalpurpose operation 2 helical flutes Single end with weldon shank Centre cutting Keyway tolerance.

916 Dia x 12 Shank MultiFlute Regular Length Weldon Shank HSCO Cobalt End Mill

Mill Diameter Inch 916 Number of Flutes 4 Material Cobalt Length of Cut Inch 138 Shank Diameter Inch 12 FinishCoating Bright Single or Double End Single Center Cutting Yes Overall Length Inch 338 Flute Direction Right Cutting Direction Right Variable Helix No Helix Angle 30 Centre cutting allows these end mills to drill into the part for the beginning of a slot These centre cutting end mills are recommended for pocketing, tracer milling, cam milling, die sinking and slotting.

H Black/Gold 135 degree H.S.S. Jobber Drill, 10PK

Drill Bit Size Letter: H Drill Point Angle Degrees: 135 Drill Bit Material: High Speed Steel Drill Bit Finish/Coating: Black/Gold Flute Type: Spiral Cutting Direction: Right Shank Type: Straight Coolant Through: No High Speed Steel Black/Gold finish extends tool life 135 degree split point penetrates faster and prevents bit inwalkin 30 degree helix angle.

085mm General Purpose HSS Drill

Drill Bit Size mm 085 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Flute Type Spiral Cutting Direction Right Shank Type Straight Coolant Through No 118Deg point.

980mm Heavy Duty Split Point Cobalt Drill

Drill Bit Size mm 98 Drill Point Angle Degrees 135 Drill Bit Material Cobalt Drill Bit FinishCoating Gold Finish Flute Type Spiral Cutting Direction Right Shank Type Straight Coolant Through No Heavy duty 135Deg split point.

Letter E General Purpose H.S.S. Jobber Length Drill, 10PK

Drill Bit Size Letter: E Drill Point Angle Degrees: 118 Drill Bit Material: High Speed Steel Drill Bit Finish/Coating: Black Oxide Flute Type: Spiral Cutting Direction: Right Shank Type: Straight Coolant Through: No.

0588 Straight Flute Decimal HSS Chucking Reamer

Reamer Diameter Decimal Inch 0588 Reamer Material High Speed Steel Shank Type Straight Flute Type Straight This high quality tool is designed for most standard reaming needs M2 High Speed Steel.

34 MT2 18 OAL Extra Length Taper Shank HSS Drill

Drill Bit Size Inch 34 Shank Taper Designation MT2 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Overall Length Inch 18 Through Coolant No.

2932 MT3 20 OAL Extra Length Taper Shank HSS Drill

Drill Bit Size Inch 2932 Shank Taper Designation MT3 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Overall Length Inch 20 Through Coolant No.

620mm Taper Length HSS Drill

Drill Bit Size mm 62 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Flute Type Spiral Flute Cutting Direction Right Hand Shank Type Straight Through Coolant No Taper length drills are designed for general purpose drilling where longer length is required Heavy duty 135Deg split point Sizes over 12 furnished with notched point.

36 6 OAL HSS Aircraft Extension Drill

Drill Bit Size Wire 36 Drill Bit Size Decimal Inch 01065 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Overall Length Inch 6.

6 Carbide Tipped Jobber Length HSS Drill

Drill Bit Size Wire 6 Drill Point Angle Degrees 118 Drill Bit Material Carbide Tipped Drill Bit FinishCoating Bright Flute Type Spiral Cutting Direction Right Shank Type Straight Coolant Through No Designed for drilling abrasive and nonferrous materials such as castings, hard rubber, and copper alloys They are NOT recommended for drilling steel or other ferrous materials Jobber length 118Deg point High Speed Steel bodies.

12 6 OAL Carbide Tipped Masonry Drill

Drill Bit Size Inch 12 Drill Bit Size Decimal Inch 05 Overall Length Inch 6 Shank Diameter Inch 38 Shank Type Straight Shank Rotary style.

1964 10 OAL Extra Length HSS Drill

Drill Bit Size Inch 1964 Drill Bit Material High Speed Steel Drill Point Angle Degrees 118 Drill Bit FinishCoating Black Oxide Overall Length Inch 10 Through Coolant No 118Deg point.