Ground Flutes, With High Concentricity.

Ground flutes, with high concentricity.

. Recommendation: Maximum drilling depth: L2 = LC 1.

With Balluff/RFID chip bore.

301359, coolant pipe No.

of teeth Z: 4 Flute length Lc: 41 mm Overhang length L1 incl.

Ds: 20 mm recess: 52 mm Recess Dia. Improved coating for a further reduction in cutting force combined with increased tool life. Tolerance nominal Dia.

With active abrasive bonding for stainless steels Application: Primarily for finish grinding and polishing tasks on larger radii in tool and mold making- for vessel and machine fabrication.

Flap wheel for stainless steel- 150 grit- Head diameterxhead width: 50X20mm. Flap wheel for stainless steel- 150 grit- Head diameterxhead width: 50X20mm. Abrasive strips covered with Aluminum Oxide A. Grinding medium code: A Shank Dia: 6 mm recommended speed: 9000 min-1 maximum speed: 15300 min-1 The abrasive strips adapt to the contours of the component.

of teeth Z: 4 Helix angle: 30 degrees No.

Tolerance: Radius contour = Â±0. of teeth Z: 4 Flute length Lc: 16 mm Overhang length L1 incl.

of teeth Z: 4 Flute length Lc: 1.5 mm Corner radius R1: 0.1 mm Overhang length L1 incl.

. No.

Note: Flute length LC = L2 + 1.5 x DC.

Diabolo Solid Carbide Coolant Through HPC Drill, Plain Shank, TiAlN Coated, 8. Special multi-nano layer coating for drilling in hardened steels.

Suitable for inductive, contact, and hot-air shrink units.

. 309906 size 180. 308820 - 308835, Shrink-fit holder extensions No. 308600 308800.

Ds: 16 mm Corner chamfer width at 45 Deg: 0.2 mm Feed fz for slot milling in GRP CRP: 0.07 mm

h10 No.. Solid Carbide End Mill, Diamond Coated, 16 mm High-precision and stable version due to the 15 Deg helix angle. Through-coolant: no Tolerance nominal Dia.

Attention: Sizes ending with X = cutter dia tolerance h7.

Up to 3. Note: Flute length LC = L2 + 1.5 x DC. Outstanding chip evacuation due to 4 internal cooling channels from dia 3.

1204..

Ds: 6 mm

Double relief ground side clearance angle.

Recommendation: When using the solid carbide 180 Deg drill it is absolutely essential for process reliability: when spot drilling on flat surfaces to drill a pilot hole 1xD using pilot drill No.

Advantage: The 180 Deg point angle permits drilling and counterboring in a single operation. Flute geometry for optimum chip evacuation.

Surface: Bronze-colored tempered thread profile.

HSS-E Clever Tap, M10-1. High-quality HSS-E tool material and geometry for steels.

A slim chisel edge and the special arrangement of the 4 guide chamfers ensure high positioning and alignment accuracy.

Polished flutes for good chip clearance.

Cutting speed vc main application: 50 110 m/min

T 060204 HB7415-1 Grade: HB7415-1 Chip breaker: TIS Tolerance: M Cutting depth ap: 0.

With close tolerance jaw widths.

wrench length L: 475 mm maximum ring D1 max: 60 mm maximum ring D2 max: 67 mm With oval shaft..Double Box Wrench, 75 Deg, Phosphated, 41mm x 46mm Standard: DIN 838 / ISO 3318 Material: Chrome vanadium steel, phosphated.

D1: 15 mm Overall length L: 92 mm Shank Dia.

Up to 2 x D into solid material at very high feed rates and smooth cutting action. Master Alu SlotMachine Solid Carbide Roughing End Mill, DLC Coated, 16 mm Ramping capability up to 45 Deg. Special profile for machining non-ferrous metals.

620120: Size 6x7, 8x9, 10x11, 12x13, 14x15, 16x17 Number of tommy bars: 1 Packaging: Plastic tool roll

Tubular Box Wrench Set, 6X7 mm to 16X17 mm Standard: DIN 896 B Material: Heat-treatable steel tube, chrome-plated. Supplied with: 1 each box wrench No.

Application: For clamping shell end Mills and Milling cutter heads.

With Balluff/RFID chip bore.Face Mill Arbor with Cooling Channel Bore, HSK-A 100, Projection: 160, Clamping Diameter: 32mm HSK mating faces machined.

Neck Dia.

D1 = 0 / -0.

+/, 0.003 mm: Manufacturing or cutting tolerance of nominal Dia.

For producing toleranced holes in steel or short-chipping materials.Solid Carbide Drill-Reamer with Pyramid Tip, TiAlN Coated, 9.

Version: All countersinks have 3 cutting edges- radially relieved.

Flutes are ground from solid.

Suitable for internal and external threads.

Application: For Whitworth parallel pipe threads DIN-ISO 228/1 threads that do not form a seal within the connections. Solid carbide thread milling cutters with irregular cutting edge spacing and an increased number of cutting edges. Corrected thread profile for avoidance of profile distortions. Increased number of cutting edges.

Supplied with: 5 pieces optimized for material: Wood Worktop thickness softwood: 3-30 mm Type of cutting: straight cutting fine Type of cutting: Plunge cutting Saw blade material: HCS Tooth pitch: 2.7 mm Blade length: 100 mm Number of blades: 5

Jigsaw Blades for Wood, 5 Pc, Designation: T101B Version: Jigsaw blades with ground sharp teeth for precise sawing in wood.. For mounting on a single-cam shank. Jigsaw Blades for Wood, 5 Pc, Designation: T101B.