9 BAR.2 BAR above the maximum output up to 100 PSIG 6.Transducer, Electro-Pneumatic, Type I/P, 4-20mA, 3-27 psi NEMA 4 The Type 1000 accepts a wide range of supply pressures, ranging from a minimum of 3 psig 0.

18AWG copper-clad steel•Foam PE•60% aluminum braid•UL listed to meet CL2 guidelines•Hassle and tangle free packaging•PVC jacket•500 ft pull box•.

VPS 100 Intermediate Duty Pillow Block Ball Bearing, 1 in Dia Bore, 3-21/32 to 4-7/32 in L Bolt Center-to-Center, 1-7/16 in Base to Bore Centerline, 5 in OAL x 2-11/16 in OAH.

VPS 200 Normal Duty Pillow Block Ball Bearing, 1-1/2 in Dia Bore, 4-7/8 to 5-7/8 in L Bolt Center-to-Center, 2 in Base to Bore Centerline, 7-1/8 in OAL x 4 in OAH.

VPS 200 Normal Duty Pillow Block Ball Bearing, 2-7/16 in Dia Bore, 6-53/64 to 7-63/64 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/2 in OAL x 5-9/16 in OAH.

VF2S 200 Normal Duty Non-Expansion Flange Mount Ball Bearing Unit, 5/8 in Dia Bore, 3 in L Bolt Center-to-Center, 2-Bolt Flange Mount, 2-1/8 in OAL/Dia.

TITAN INDUSTRIAL SUPPLY T12132Z5 Grade 5, Hex Head Cap Screw, 2 in L.

WHITECAP MARINE PRODUCTS S-1854 Stainless Steel 90 degrees Telecoping Ladder -.

Tube Size: 1in Square Pin Size: 3/16in x 5in.

WHITECAP TEAK 60179 Three Toggle Switch Plate.

Tube Size: 1in Material: Brass.

6 mm/rev.8 6 mm Feed f: 0..2 0.

2 mm Min. Attention: Always use the minimum pre-drill Diameter to match the slot width e. In such cases, where possible, always use the optimum combination of holder and cutting insert identical size for maximum stability.22 mm.

1204.. Through-coolant: yes Standard: DIN ISO 5610 ISO code toolholder: PSSNR/L 2020X12 suitable indexable insert: SN. Note: Coolant transfer via slot on the underside of the shank in conjunction with GARANT Master eco toolholders No.

Socket No.

1/4 inch Drive Socket, 6 pt, 8mm.1/4 inch Drive Socket, 6 pt, 8mm Standard: DIN 3124-S Material: Chrome vanadium steel- chrome-plated. Material: Chromium vanadium steel Dia drive output end: 11.7 mm Length: 25 mm Square drive socket with hole to DIN 3120 D 6.

. Square drive: 1/2 in drive output end: 24 mm Length: 38 mm Material: Chrome molybdenum steel, surface burnished. For safety reasons must always be secured using a suitable locking pin and O-ring.

Version: Made of tough rubber 90 Shore- non-rebound- with powerful impact. Head length: 130 mm Head Dia: 74 mm Handle length: 380 mm Weight: 750 g Standard: DIN 5128 Spare part: Spare handle available under No. Rubber Hammer, Black, Face Dia: 74 mm.755600.

General-Purpose Scissors, Bright Finish, 300 mm. Application: Paper, cardboard, plastic sheeting, leather, and much more. Strong adjustable screwed joint.

354210 354400. Optional extras: Pull studs PS, No.

Long Hex Bit Socket, with Retainer Ball, 3/8 inch Dr, 4 mm Internal square to DIN 3120. Forged from high quality steel, internally bevelled for easy fitting to bolt heads.

30 9900: 12 Application: For clamping tools with side flats to DIN 1835 B and DIN 6535 HB..

Plastic Insert, Medium Hard, Replacement Insert for 752500, 752510, 752520 Suitable for: Soft-faced hammer with dead-blow absorption No..

Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials.8 mm.

5-in-1 Drilling and Turning Tool, 1. Plain shank. With internal cooling.

Optional extras: Pull studs PS, No. 308760 308806, Shrink-fit holder extension No.. 302410 302417, shrink-fit units No.

Overhang dimension A: 80 mm External Dia D: 42 mm Spare clamping screw No. With RFID/Balluffchip bore.

354210 354450, balancing screw set No. Without tapped holes for balancing screws and without thread for coolant pipe.

Machining strategy: HSC Overhang dimension A: 80 mm External Dia D: 50 mm 309893. With RFID/Balluffchip bore.Whistle-Notch Arbor, PSC 63 short, Clamping Range: 18mm All shanks hard turned for smooth running!.

.Pair of Parallels, 90x10 Magnetic Underside, Height: 28mm Length: 90 mm Width: 10 mm Height: 28 mm Advantage: Flexible use thanks to integral rod magnet on the underside.