with MIN level and MAX temperature electrical sensors, HCK.

40 p-5/16-18x3/4-C2.Zinc-plated steel threaded stud, MBT.

Stainless steel threaded stud, with cap, VCT.

0, ZCL-2.Module 2.

New Compressor.

. This stylish series is available in five other finishes, and four additional lengths.128 mm Center-to-Center Brushed Oil Rubbed Bronze Square Asher Cabinet Pull Each item is individually wrapped to protect the item from damage.

Attachment hardware is included.

A flowing arch and strong structured foot make an inspiring and compelling combination for Roman by Jeffrey Alexander..

The scallops gently frame the center cove, giving this corbel a modern feel. 1-3/4" Wx9"Dx12"H Cherry Scalloped End Corbel. With scalloped ends and a cove in the center, this simple Cherry corbel is perfect to accent any project. Overall measurements: 1-3/4" W x 9" D x 12" H.

Anodized 2-Way Fin Extrusion for 1/2in Flush Panel by EZTube, Boltless, Silver, 84in L x 1in W x 1in H x 0.050in wall.

4308 Indexing Plunger Without Collar Size:3 D1=M16X1,5, D=8, Form:U.KIPP K0635.

KIPP K1026.0808 Slot Key Twist-In D=M08 B=11,6 Steel.

316 Stainless Steel wetted parts.

Cleaning for Oxygen Service O2 is available only for dry or HL Halocarbon filled gauges. 304SS Case, 316SS Internals, 5000 psi/bar, 1/2 NPT Male Back Conn, Glycerin Filled, 304SS Bezel & U-Clamp. Pressure Gauge, 4" 304SS Case, 316SS Internals, 30/60 psi, 1/2 NPT Male Back Conn, Glycerin Filled, 304SS Front Flange Corrosion-resistant fillable dry or liquid-filled gauge. Pressure Gauge, 6 in.

2" x 3-1/2" No Lead Red Brass Nipple.

•Made of Buna-nitrile (also called Buna-N) for use with a variety of fluids and hydrocarbons•These versatile o-rings perform well in petroleum based oils & fuels, aliphatic hydrocarbons, vegetable oils, silicone oils & greases, ethylene glycol, dilute acids, and water to below 100°C (212°F)•Durometer (hardness) of 90A for resistance to penetration.

•Made of Ethylene Propylene Diene Monomer (EPDM) rubber for use with a variety of chemicals and environments•Round cross-section to provide a seal between cylindrical overlapping surfaces•Durometer (hardness) of 70A for resistance to penetration.

•Made of Viton (fluorocarbon elastomer) for use with a variety of chemicals and fuels•Round cross-section to provide a seal between cylindrical overlapping surfaces•Durometer (hardness) of 90A for resistance to penetration.

•Made of Buna-nitrile (also called Buna-N) for use with a variety of fluids and hydrocarbons•These versatile o-rings perform well in petroleum based oils & fuels, aliphatic hydrocarbons, vegetable oils, silicone oils & greases, ethylene glycol, dilute acids, and water to below 100°C (212°F)•Durometer (hardness) of 70A for resistance to penetration.

•Made of Viton (fluorocarbon elastomer) for use with a variety of chemicals and fuels•Round cross-section to provide a seal between cylindrical overlapping surfaces•Durometer (hardness) of 75A for resistance to penetration.

•Made of Viton (fluorocarbon elastomer) for use with a variety of chemicals and fuels•Round cross-section to provide a seal between cylindrical overlapping surfaces•Durometer (hardness) of 90A for resistance to penetration.

•Made of Viton (fluorocarbon elastomer) for use with a variety of chemicals and fuels•Round cross-section to provide a seal between cylindrical overlapping surfaces•Durometer (hardness) of 90A for resistance to penetration.

NEXTTEQ INTERNATIONAL NX2106 NXI Airflow Test Kit with 5 Tubes.

1/4" x 1 1/2" Type 25 Thread Cutting Screws/Unslotted/Hex Washer Head/Steel/Zinc , 1250PK.

#14-10 x 1/2" Type A Self-Tapping Screws/Slotted/Hex Washer/Steel/Zinc Plating , 2500PK.

3/8-16 x 2" Ribbed Neck Carriage Bolts/Steel/Zinc , 500PK.

1/4-20 x 5/8" Machine Screws/Unslotted/Hex Washer Head/Steel/Zinc , 2500PK.

25 x120mm Fine Thread, 150PK.9 ,Black Oxide,M10-1.

.MLS 2-Head Trimless Kit, Comfort Dim, 800lm, Black/MPW Adj. Snoot/Fixed Iolite multiple series is a perfect solution for most retail, hospitality and commercial applications.Features: Trimless knife edge appearance Delivering over 1000 lumens per head 3 Field changeable optics included - Premium TIR optics available Customizable trim options Fixed downlight, adjustable snoot or wall wash Dimmable Utilizes same technology as Iolite Downlight Series COB LED technology or Comfort Dim Warm Dimming 2700K, 3000K, 3500K, 4000K or 5000K at 90+ CRI Available in one, two or three head configurations Black, haze or matte powder white finishesHousing Required: Iolite MLS One Head Housing NMHIOIC-11LE4 Endless possibilities with Iolite multiples functionality and architectural aesthetics.

.MLS 3-Head Trimless Kit, 3500K, 1000lm, MPW Blank/Wall Wash , NMIOTL-13-NF-BWW-35X-10-MPW Iolite multiple series is a perfect solution for most retail, hospitality and commercial applications.Features: Trimless knife edge appearance Delivering over 1000 lumens per head 3 Field changeable optics included - Premium TIR optics available NIO-REFLTIR Customizable trim options Fixed downlight, adjustable snoot or wall wash Dimmable Utilizes same technology as Iolite Downlight Series COB LED technology or Comfort Dim Warm Dimming 2700K, 3000K, 3500K, 4000K or 5000K at 90+ CRI Available in one, two or three head configurations Black, haze or matte powder white finishesHousing Required: Iolite MLS Three Head Housing NMHIOIC-13LE4 Endless possibilities with Iolite multiples functionality and architectural aesthetics.