ACCUFORM MARKER STAKES WITH STICKERS DECAL FMK611YLOR.

ACCUFORM DRY ZONE STOREBOARDS PSB110RDYL.

Accuform WET ZONE STOREBOARDS MAXDUTY PSB611BUYL.

Profile ground: this ensures high concentricity and pitch accuracy. Bright finish parabolic flutes, from 3 mm nitrided chamfers.

.16 mm Corner radius R1: 0.

Diabolo Solid Carbide Coolant Through HPC Drill, Plain Shank, TiAlN Coated, 9. Cutting chisel edge with high centering accuracy due to strong core and special point geometry.

g: vf = 18000 rpmx fz mm/Zx z No. D1 = 0 / -0. Neck Dia.

Especially for MTC Multi Task Cutting use on the new generation of turning / milling Centers. Application: For very high metal removal rates and increased machining volumes. HSS-E-SPM MTC Roughing End Mill, TiAlN Coated, 14 mm.

Dovetail Milling Cutter, Form D, 60 Deg, 16 mm Note: For milling small dovetails in tool making and machine building. Special surface treatment..

5 x DC.

. Version suitable for NC similar to DIN 8093 with straight shank Dia.

.6 mm Ground from solid and relief-ground.HSS Center Drill, Left-Hand, Uncoated, 1.

Suitable for machining titanium and titanium alloys. Master Steel Solid Carbide End Mill, for Finishing, TiAlN Coated, 16 mm For profile milling as a finishing operation. DC = 6 mm. f8 No.

An even number of teeth with irregular spacing for accurately round holes, free of chatter. HSS Hand Reamer, 20 mm Application: For through holes not for blind holes.

e. 0 / -0.6 mm Overhang length L1 incl.For the highest demands regarding performance and precision in Fiber-reinforced composites, CRP, GRP, and graphite.

5 mm Overhang length L1 incl.recess: 38 mm Recess Dia. Tolerance: R1 = ±0. With the latest generation of DLC coating sp2.

2 4xD on NC machines and automatic machines. Made up of stub drills No. Particularly robust and strong due to strengthened core. With point geometry shape S special Advantage: Ideal for drilling shallow holes approx.

Solid Carbide Corner Rounding Cutter, TiAlN Coated, 6 mm No. Straight fluted, without profile distortion.

. Please note that the included adapter is designed for use in Germany.LED Rechargeable Inspection Lamp with Swan Neck, 500 lm Main lamp steplessly dimmable. For use in the United States, you will need to provide a compatible power adapter.

Significantly improved self-centering due to additional pyramid tip for optimum roundness and tolerance accuracy of the hole that is produced.Solid Carbide Drill-Reamer with Pyramid Tip, TiAlN Coated, 6 mm Reliable complete machining without separate centering and without subsequent reaming process..

Solid Carbide Micro End Mill, DLC Coated, 2. Ds: 4 mm 0 / -0. Recess angle a = 16 Deg. D1 = 0 / -0.

Tolerances: Corner radius: R1 = ±0. Double relief ground with 2 hollow-ground chamfers.01 mm Note: At greater tool overhang lengths, use a reduced value for ap!.g: vf = 18000 rpmx fz mm/Zx z No.

05 mm of teeth Z: 2 Helix angle: 45 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HB to h6 No.of teeth Z: 2 Flute length Lc: 16 mm Overall length L: 73 mm Shank Dia. Solid Carbide End Mill , Uncoated, 12 mm Through-coolant: no Tolerance nominal Dia.

Master Steel Solid Carbide Coolant Through Drill, Plain Shank, TiAlN Coated, 4.

Solid Carbide End Mill, Uncoated, 4 mm Through-coolant: no Tolerance nominal Dia. Ds: 4 mm D1: 3.

.. Dia.

75 mm 2 4xD on NC machines and automatic machines. Recommendation: Maximum drilling depth: L2 = LC 1..

.End Mill for Aluminum, Uncoated, 2 mm Wide, fine ground chip flutes.

.

5 mm Dia..