Drill, 710 12D 12.00 TIALN RH SE

00 Drill, 710 12D 12.120.FULLERTON TOOL 710.00 TIALN RH SE.

O-Ring; 1.78MM Cross Section X 7.65MM ID; NBR; 25BAG, 25PK

78MM Cross Section X 7.65MM ID; NBR; 25BAG.O-Ring; 1.

Speedy Sleeve; 19MM X 7.95MM

95MM.95 SSLEEVE Speedy Sleeve; 19MM X 7.SKF 99076 / 19X7.

Bore; 1-9/16 in.

. Bore Width; Single Row of Roller Bearing Cone; 46790 Basic Number; Standard Precision; 6-1/2 in.Bearing Cone, 46790 Basic Number, Standard Precision, 6-1/2 in.

With its large 1.5 39 mm maximum opening, a wide array of materials can be tested up to the 110 lb 50 kg capacity.

The NIDEC VISE GRIP for Force Test Stands is a simple, versatile tension grip for testing various samples..VISE BASE GRIP FOR TEST STANDS This durable tension grip is compatible with all Nidec-Shimpo motorized and manually operated force test stands.

male adapter, and wiring included.

EZT230 condensate float switch offers overflow protection with a clear and cleanable trap. Clear trap tube; brush, 3/4 in. nc screw cap trap U 1 in. Watertight red caps provide easy access to clean the trap and drain pan outlet.

or 4 in..

Clean Check prevents sewage backup into plumbed structures as a result of a plugged sewer system, excess volume in the system or groundwater flooding. Flapper installs discretely outside - up to 12' below ground level. Recommended for PVC and ABS. Easy installation for home improvement.

Multi Point Canopy 5 Light Ceiling Plate, Heritage Brass

Trim And Bumper Paint, Dark Charcoal, Aerosol Can, 11 Ounce

Trim And Bumper Paint; Dark Charcoal; Aerosol Can; 11 Ounce.

RANGES COOKTOPS MICROWAVES RV 11 Cubic Foot Capacity 900 Watt Flat Bed 151 Inch Height x 223 I

LASALLE BRIS 520EM923MI2S RANGES COOKTOPS MICROWAVES RV 11 Cubic Foot Capacity.

WHEEL SPACER 5 x 112 Millimeter 5 x 440 Inch Bolt Pattern 040 Inch 10 Millimeter Thick

Limited Lifetime Warranty.

Use To Remove Side Terminal Bolts 516 Drive With Handle

PERFORM TOOL W1674 Use To Remove Side Terminal Bolts 516 Drive With Handle.

DECAL Skull Set Chrome Black Vinyl 24 Inch x 1125 Inch

Limited Lifetime Warranty.

Finished Beam Axle Drop Spindle 3500 Pound Capacity 86 Length Hub Face To Hub Face

LIPPERT COMP V000236113 Finished Beam Axle Drop Spindle 3500 Pound Capacity 86.

Available in sizes from 1/4-inch to 2 inches in a wide variety of end formations, the 43 Series is offered in more than 2,500 configurations and is available around the world.

43 Series fittings feature one-piece construction with chromium-6-free plating, and are compatible with petroleum-based hydraulic fluids and lubricating oils and with phosphate-ester-based hydraulic fluids. Markets: - Transportation - RV & Bus - Military - Construction - Agriculture - Grounds & Building Maintenance - Forestry - Railroad - Utility Equipment - Personnel Lift Equipment - Machine Tool - Oil Field Service - Waste & Refuse - Material Handling - Marine - Paving & Road Maintenance - Ground Support Equipment - Industrial - Mining Features/Benefits: - Easy push on force - Imperial HEX - Stainless steel option available - Wide range of end configurations - One piece reduces complexity and leakage path - No-Skive technology offers easy, efficient, and safe production processes Applications: - Petroleum base hydraulic fluids and lubricating oils - Phosphate-ester base hydraulic fluids Compatible Hoses: - 301LT - 302 - 304 - 351TC, 351ST - 387/TC/ST -4 through -20 only - 422 - 424 - 426 - 431 - 436 - 451TC, 451ST - 471TC, 471ST - 472TC - 482TC, 482ST - 487/TC/ST -4 through -16 only - 722/TC/ST - 787/TC/ST -4 and -6 only - 797/TC/ST -4 and -6 only - 881 - GST II Series 7092 For highly corrosive applications, 43 Series fittings also are available in stainless steel.43 Series of hydraulic hose fittings 43-F-S-JIC 37-STR This cost-effective line of permanent crimp-style hydraulic fittings is designed for use with Parkcrimp crimpers to deliver ''bite-the-wire'' sealing and holding power.

Compression fittings are also used in situations where a heat source, in particular a soldering torch, is prohibited.

These compression fittings require no flaring, soldering, tube preparation or special tools to operate.

This range of products provides the user with a complete solution covering numerous applications, both in non-corrosive and corrosive environments.

EQUAL Y FEMALE 1/4'' BSPP NICKE L Features/Benefits: - Large Range & Flexibility - Large selection of materials for excellent chemical compatibility: brass, steel, stainless steel, aluminium - Surface treatment for increased corrosion resistance: nickel-plated brass or anodised aluminium - Stainless steel for corrosive environments - BSPP, BSPT, NPT and metric threads - Performance - Robust design - Suitable for low to high pressure, depending on configuration and material - Forged shapes for mechanical strength Markets: - Factory Automation - Miscellaneous manufacturing - Packaging - Vehicle Assembly Facilities - Wearing Apparel - Food and Beverage Applications: - Suitable for Corrosive and Non Corrosive Environments - Suitable for High and Medium Pressure Technologies: - Bulkhead connector - Equal tee - Manifold block - Fitting system - Pneumatic fittings - Brass adaptor - Stainless steel adaptors - Brass connectors Technical Characteristics: - Materials: Adaptors and Plugs: Brass, nickel-plated brass, stainless steel 316L, steel Manifolds: Anodised aluminium - Pressure: Adaptors and Plugs: Brass: 1/8'' to 1/2'': 200 bar; 3/4'' and 1'': 150 bar; 11/4'' to 2'': 100 bar, without sealing washer Nickel-plated brass: 60 bar Stainless steel 316L: 1/8'' to 1/2'': 200 bar; 3/4'' and 1'': 150 bar; 11/4'' to 2'': 100 bar, without sealing washer Steel: 1/8'' to 1/2'': 200 bar; 3/4'' and 1'': 150 bar; 11/4'' to 2'': 100 bar, without sealing washer Manifolds: Anodised aluminium: 20 bar - Temperature: Adaptors and Plugs: Brass: -40 DegC to +150 DegC without sealing washer; -20 DegC to +80 DegC with sealing washer Nickel-plated brass: -10 DegC to +80 DegC Stainless steel 316L: -20 DegC to +180 DegC Steel: -10 DegC to +80 DegC Parker offers a wide range of adaptors compatible with the various Parker Legris fitting systems..

Partek Sleeve is available in either black or yellow and in sizes to fit most hydraulic hoses.

. In addition, this weave gives an exceptionally smooth interior wall, allowing the rubber hose to move freely inside the sleeve without internal abrasion issues.

Markets: - Industrial Features/Benefits: - Non-marring jacket - Broad temperature range Applications: - Low pressure power washers - Carpet cleaning machines Technical Specifications: - Tube: Nylon - Reinforcement: Fiber - Cover: Yellow polyurethane, perforated - Do not use with chlorinated solvents - Hose bend restrictor HBR available and suggested for carpet cleaning applications - Hose I.D.

High Temperature Power Wash Hose is designed for use with low pressure power washers or as a carpet cleaning hose for carpet cleaning machines as long as chlorinated solvents are not used.A hose bend restrictor is available for carpet cleaning applications to prolong hose life due to flex fatigue. is maximum is nominal - Hose O.

Piggy Doormat 24 x 36

Made of natural coir, a dense fiber that is naturally mold and mildew resistant Coir is a renewable resource that is durable and coarse, excellent for scraping shoes clean Vinyl backed for increased durability and to help prevent movement, coir doormats are weather tolerant absorb moisture and retain their shape For best results keep in a sheltered area such as a covered porch, keeping extreme moisture and sunlight to a minimum Vacuum, sweep or lightly hose clean.