Royal 186-1 Sg Flush Valve.

x 1/8 In.Push-Lock,Male Run Tee,1/4 In.x1/4 In.

.A/C Compressor Clutch Connector, 1P1792 WVE a/c compressor clutch connector's are available for on and off road use and are designed for all weather conditions. WVE a/c compressor clutch connector's built a reputation in the automotive industry for quality and craftmanship.

4 in, BX Pitch Diameter 9.4 in, C Pitch Diameter Not Applicable, CX Pitch Diameter Not Applicable, Bore Diameter 1 3/8 in, Bore Type Fixed, Standards REACH Certification, RoHS Compliant.

2 mm, Plastic, Includes Fasteners No, Offset Not Applicable, For Profile Type Single, Compatible Brand and Series 40 Series, Faztek, Includes Molded Push-In Stem.End Cap, Plain, 40 Series, Overall Height 40 mm, Overall Width 40 mm, Overall Length 40 mm, Metric, Black, For Slot Width 8.

7 Percent, Product Type Rescue Rope, Lifting Capability For Lifting, Rope Format Bag, Rope Strand Count 32, Core Strand Count Not Applicable, End Type Plain, Elongation @ 300 lb 2.Rescue Rope, Rope Type Static, Breaking Strength 8,992 lbf, Working Load Limit 900 lb, Rope Construction Kernmantle, Diameter 31/64 in, Overall Length 600 ft, Core Material Nylon, Cover Material Polyester, Elongation @ 10 Percent Minimum Breaking Strength 7.5 Percent, Minimum Operating Temperature -40 Degrees F.

.

Flexible Cylinder Hone, Compatible Bore Diameter - Maximum 2 3/4 in, Compatible Firearm Caliber Not Applicable, Stem Diameter 0.25 in, Abrasive Length 3 in, Overall Length 8 in, Abrasive Material Silicon Carbide, Grit 240, Compatible Tool Type CNC Machine, Drill, Drill Press, Operating Speed - Maximum 900 RPM, Primary Material Application Cast Iron, Steel, Stainless Steel, End Marking Color Not Applicable, Grade Fine, Stem Marking Color Not Applicable.

Flexible Cylinder Hone, Compatible Bore Diameter - Maximum 4 mm, Compatible Firearm Caliber Not Applicable, Stem Diameter 0.06 in, Abrasive Length 3/4 in, Overall Length 6 in, Abrasive Material Silicon Carbide, Grit 240, Compatible Tool Type CNC Machine, Drill, Drill Press, Operating Speed - Maximum 1,200 RPM, Primary Material Application Cast Iron, Steel, Stainless Steel, End Marking Color Not Applicable, Grade Fine, Stem Marking Color Not Applicable.

Taper Length Drill Bit, Drill Bit Size 5/64 in, Drill Bit Point Angle 118 Degrees , Conventional Point, High Speed Steel, Black Oxide.

Jobber Length Drill Bit, Drill Bit Size 31/64 in, Drill Bit Point Angle 118 Degrees , High Speed Steel, Black Oxide, Decimal Equivalent 0.4844, Fractional Inch, Drill Bit Point Type Conventional Point, Non-Coolant Through, Number of Coolant Holes 0.

2720.Screw Machine Drill Bit, Drill Bit Size I, Drill Bit Point Angle 135 Degrees , Split Point, High Speed Steel, Black Oxide, Cutting Direction Right Hand, Decimal Equivalent 0.

Reduced Shank Drill Bit, Drill Bit Size 5/8 in, 118 Degrees Drill Bit Point Angle, Material - Machining High Speed Steel, Finish - Machining Black Oxide.

2, Compatible Tube Material PEX.

Cap, Distributor (4 Cyl), Dim A (1): Clip Type.

750", Dim B (2): 3.330", Dim F (6): 1-1/2", Hose Inside Diameter: 3/4", Replaces: Dayco # HY12-12FJ90TL - Weatherhead # 12U-652, Thread Size: 1-1/16 x 12.(HC-FJX90L) Female JIC 37� - Swivel - 90� Elbow Long, Dim A (1): 0.777", Dim C (3): 2.

3" P1500 Grit Dynasoft Finishing Film Non Vac Hook Face Disc (50 count box).

Prism 6 Light Brushed Nickel Chandelier.

Turning Insert,Diamond,CNMG 432PP PV71.

Grooving Insert,GDFM 4020N200RCM PR1225.

Ultimate 90,Sealed-Edge,Poly 2-Pl,PK6, Package Quantity 6.

Lock Washers,5/8 EXT TOOTH LOCK,PK2000.

. GN 615 ball plungers are used as locating devices, detent pins, pressure pins and ejectors.

1 grub screws are typically used with thrust pads, making a low-cost solution for clamping operations or for load bearing purposes..GN 632.

5-A Oil Sight Glass In addition, this groove prevents the seal from being extruded when the sight glass is tightened. GN 743 Fluid level sight glasses offers a variety of features such as genuine glass of high stability and scratch proof and sealing with an O-ring on the periphery and not on the face edge of the glass.GN743-32-M40X1.

.

.GN810-330-C Vertical Toggle Clamp Steel A spindle assembly with neoprene rubber tip is also included for Type C. GN 810 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction.

Package Quantity 2.

Outside Protection Plate, Package Quantity 5.

381", Top Width: 5/8", Type: B Section Cogged, Width: 5/8".Cogged Classical V-Belt (5/8" X 90"), Color: Black, Depth: 13/32", Length: 90", Material: Polyester Cord, Notes: 5/8" x 90" B Section Cogged Polyester Cord, OC Length: 5/8" X 90", Thickness: 0.