GN 614 short press-fit ball plungers are used as detents as well as for push-on / push-off applications and ejectors..

.GN 638 ball jointed leveling feet are a low cost solution for clamping operations or for load bearing purposes.

.DIN 6336 star knobs with steel insert are an economical choice, yet offer top quality and ergonomic styling.

5-B Oil Sight Glass In addition, this groove prevents the seal from being extruded when the sight glass is tightened. GN 743 Fluid level sight glasses offers a variety of features such as genuine glass of high stability and scratch proof and sealing with an O-ring on the periphery and not on the face edge of the glass.

The various types of mini-clamps are typically used to build support structures for mounting sensors, plexiglass guards, or other elements.GN478-B15-M8-MT Mounting Connector In the standard version, the clamping force of the clamp onto the tube is achieved via the socket cap screws.

GN 42 leveling feet are simple, economically priced components and can be used universally thanks to the wide range of possible combinations of the base and the stud / socket versions..

.The clamping principle of GN 860 pneumatic toggle clamps is identical in construction and dimensions to the manually operated GN 810 vertical acting toggle clamps.

.On clamping operations, the partially protruding hub of the GN 421 hollow knurled screws prevents chipping of the plastic.

.GN705-24-E Set Collar Steel, Socket Together with a dimpled hole or a groove on the shaft diameter, the shaft collars can be positioned exactly and, at the same time, damage to the clamping point can be avoided. GN 705 set screw shaft collars are primarily used as securing rings on round shafts.

. Made in the USA, WN 300 adjustable levers are the result of modern industrial design: glass fiber reinforced thermoplastic with molded-in stainless steel inlay.WN300-KT-63-M10-40-SW Plastic Adjustable Lever The insert is connected to the lever via serrations that can easily be disengaged.

Eye Bolt M8, 20 mm ID, Stainless Steel The DIN 580 eye bolt must be of fully screwed in, achieving complete contact between the two mating faces..

GN2277-ALS-30-K-30-A Bulls Eye Level GN 2277 bull's eye levels with mounting flange are used to check the horizontal position of jigs, machines, devices, appliances and instruments..

1-160-T3-NI Latch Toggle Clamp The stroke of the U-bolt latch of GN 851.1 vertical latch type toggle clamps can be adjusted within its range..GN851.

1 10TWP8 Leveling Feet WN 9000.1 "NY-LEV" leveling mounts are a quality and economical solution to your leveling and height adjustment needs..JW Winco WN9000.

2 adjustable levers are the result of modern industrial design: glass fiber reinforced thermoplastic with molded-in stainless steel inlay and zinc plated components..

.B8.

.DIN 6303 knurled nuts are machined from solid bar.

.GN163-B2-85-2-BL Base Plate Connector Clamp The clamping bores of GN 163 flanged connector clamps are machined and designed for construction tubings.

1 adjustable levers are the result of modern industrial design: glass fiber reinforced thermoplastic with molded-in stainless steel inlay.WN300.

No mounting hole in rim for handwheel without handle.

.JW Winco GN126-120-3/8X16-40-SW Adjustable Lever GN 126 flat adjustable tension levers are characterized by their low height and the timelessly elegant design.

JW Winco GN 516-VDE-47 Cam Latch GN 516 compression latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm into a 6 mm linear stroke.

.GN300-108-1/2X13-55 Adjustable Lever Steel GN 300 adjustable levers have proven to be ideal wherever parts have to be clamped in a confined space or in a particular lever position.

.GN 5336 star knobs are forged; therefore, a close grain structure is maintained providing a high tensile strength and a smooth surface.

0L Do.2005-2003 Tot V6 4.

Thermostat Gasket.

Thermostat Gasket.

The primary color of this product is galvanized steel and it comes with galvanized steel hardware. Width (left to right). 2-in. This galvanized cap features a round shape with a traditional style.

Rmt P-3 Cob Jobber Drill R.

.