Tolerance Specifications: Size 0.6 - 0.9: Manufacturing Or Cutting Edge Tolerance 0/+0.004 Mm.

Tolerance specifications: Size 0.6 - 0.9: Manufacturing or cutting edge tolerance 0/+0.004 mm.

No need to procure special collets when using GARANT-NC reamers.

equal.

Note: Flute length LC = L2 + 1. and shank Dia.5 x DC.

With point geometry shape C.

5 x DC. Extremely high heat resistance-very robust due to strong core.

Application: For very high metal removal rates and increased machining volumes on stainless steels.

. Center cutting teeth profile for plunging.

38 mm Height: 10 mm

Cutting direction: right-hand Tolerance class: DIN 13 6g Pitch: 1..5 HSS Round Die, Closed/Pre-Slit Form 1 3/4 turns lead chamfer.

Advantage: Particularly low vibration running.

No.005 mm.

With point geometry shape C from size 2.4 mm Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

Profile ground: High concentricity and pitch accuracy, drills for series production use.

With point geometry shape C from size 2.4 mm Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

Profile ground: High concentricity and pitch accuracy, drills for series production use. Standard core without core taper.

Even if the lathe centers are not in line, good support is provided.

Ground from solid and relief ground, spiral fluted.15 mm Center drill with radius form R: The radius curve eliminates the sharp transition from drill point to countersink angle that is present on form A, so the risk of fracture is reduced.HSS-E Center Drill with Flat, Type R, Uncoated, 3.

Note: Flute length LC = L2 + 1.5 x DC.

For high-performance milling of aluminum materials.

Recommendation: When using the solid carbide 180 Deg drill it is absolutely essential for process reliability: when spot drilling on flat surfaces to drill a pilot hole 1xD using pilot drill No.

Special point geometry for generating 180 Deg flat-bottomed holes.

Precise concentricity for exact holes.

High-performance HPC twist drills for high-alloy and high tensile materials.Particularly strong due to strengthened core and a parabolic flute profile. With form S point. HSS-E-PM Parabolic Jobber Drill, TiAlN Coated, 1.

65 mm Height: 18 mm

Closed, pre-slit form, with tapered lead chamfer on both sides. Cutting direction: right-hand Tolerance class: DIN 13 6g Pitch: 2 mm External Dia.M30X2 HSS Round Die, Closed/Pre-Slit Form 1 3/4 turns lead chamfer..

122736 is necessary.

The generation of a pilot hole improves process reliability.Solid Carbide HPC Deep Hole Drill, 20XD, TiAlN Coated, 7 mm 122736 is absolutely essential. Note: Flute length LC = L2 + 1.

With wear-resistant, ultra-smooth TiAlSiN high-performance coating for a long tool life combined with optimum bore quality and very low burr formation.

. Specially for machining titanium-based and nickel-based alloys.5 x DC.

122736 is necessary.

High roundness and alignment accuracy of the deep hole.

Ds: 6 mm Shank form: HB Corner chamfer width at 45 Deg: 0.03 mm

of teeth Z: 3 Flute length Lc: 4 mm Overall length L: 45 mm Shank Dia. Through-coolant: no Tolerance nominal Dia. Center cutting teeth for plunging.

Tolerances: Neck Dia.

25xDxap corrside milling: ap = 0.

see table less than the stated size.

HSS Core Drill, Uncoated, 16.5 mm Sturdy jobber drill for better guidance in the hole Advantage: Particularly suitable for drilling out holes that are out of round.5 x DC.