For High-performance Milling Of Aluminum Materials.

For high-performance milling of aluminum materials.

3 mm Size 1 1.Solid Carbide HPC Drill, Plain Shank, DLC Coated, 1. Note: Flute length LC = L2 + 1.5 x DC.

High cutting performance, very competitive price.

HSS-Co8 Mini Milling Cutter, Unoated, 7 mm Eccentric relief ground. Note: Save the regrinding costs: it is cheaper to use a mini slot drill to the limit of wear and throw it away than to regrind it. General-purpose cutting edge geometry.

a: 4 mm Overall length L: 132 mm Morse taper MT: 2 Feed f in steel < 500 N/mm2: 0.12 mm/rev.

Multi-edged, spiral fluted counterbore with recess in face for fitting various pilots.

guide value: 9.35 mm

Special TiAlN coating, highly suitable for aluminum alloys. The multi-function layer structure achieves maximum service life even in high-tensile materials.

Straight major cutting edges with slightly honed edges and special flute profile produce short chips.

.Solid Carbide Coolant Through HPC Drill, TiAlN Coated, 5.5 x DC. Cutting chisel edge with high centering accuracy due to strong core and special point geometry.

Tolerance nominal Dia.

e8 No.

Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

Vaporized from 2.

Flutes are ground from solid.

Ds: 8 mm for countersunk screws ISO 2009, 2010, 7046, 7047: M6 Feed f in steel < 500 N/mm2: 0. Application: High-precision countersink for chatter-free 90 Deg countersinking.

Particularly high alignment accuracy due to 4 guide chamfers which stabilize the drill even at extreme depths!

.5 x DC.

Profile ground.

Improved spot drilling behavior due to cross-ground form. Recommendation: Maximum drilling depth: L2 = LC 1.

of teeth Z: 4 Helix angle: 45 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h6 Balance quality with shank: G 2.5 with HA No.

Application: For roughing milling with high demands on the component surface.. of teeth Z: 4 Flute length Lc: 8 mm Overhang length L1 incl.7 mm Overall length L: 57 mm Shank Dia.

LIGHT 4 Pack

.Replacement For Bmw 3 Series With Halogen H/L, 1989 Glove Compartment Light 4 Pack, 4Pk Replacement for BMW 3 SERIES WITH HALOGEN H/L YEAR: 1989 GLOVE COMP.