Straight Flute Hand Tap, Special, Series DWT, Metric, M7x05 Thread, HSS, Bright, Right Hand Cuttin

pQualtech p.

Concave Radius End Mill, 0.3750 (3/8), Number of Flutes: 4

3750" (3/8) Cutter DIA Carbide Concave Radius End Mill, 4 Flutes.0.

Note: For suitable reducing adapters for tools with MT shanks see No.

without drill withdrawal. less than or equal to 16 mm Dia.

Designed for deep holes up to 10xD and materials with critical chip formation characteristics.

For combined production of centering, entry chamfer and tapping hole all in a single operation.

HSS-E Center Drill for Tapping Holes with Flat, Uncoated, For Threads: M10 With additional flats on the shank. Stepped Center drill for tapping holes to Form A..

Tolerance specifications: Size 0.6 - 0.9: Manufacturing or cutting edge tolerance 0/+0.004 mm.

No need to procure special collets when using GARANT-NC reamers.98 - 20: Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.

With point geometry shape A/C from size 2.2 mm.

HSS-E-PM HPC Stub Drill, TiAlN Coated, 6. Machining strategy: HPC Advantage: Can be used at increased cutting data.

Note: For reliable use of the micro-drills from 8xD, a pilot hole of at least 4xD is required using the micro-pilot drill 121223.

Drilling of very small diameters down to the maximum depth after creating a pilot hole.

D: 29 mm Overall length: 175 mm

g. Application: For extending short taps e.

Note: Flute length LC = L2 + 1.5 x DC.

For high-performance milling of aluminum materials. Solid Carbide HPC Drill, Plain Shank, DLC Coated, 8. 121068- 121130 is necessary.

Particularly suitable for contouring applications.

8 mm D1 +0. Solid Carbide Forward/Reverse Deburring Tool, TiAlN Coated, 11.5: 6 mm L4 +0. For forward and reverse deburring and chamfering even where access is difficult.

Recommendation: When using the solid carbide 180 Deg drill it is absolutely essential for process reliability: when spot drilling on flat surfaces to drill a pilot hole 1xD using pilot drill No.

Flute geometry for optimum chip evacuation.

Special point geometry.

Particularly strong due to strengthened core and special profile.5 mm High bore quality.. High concentricity and long tool life.

Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

4 mm Advantage: Ideal for drilling shallow holes approx.. High concentricity and special chip flutes ensure precise bores. 2 4xD on NC machines and automatic machines.

Note: For use on synchronized spindles, the GARANT quick-change tapping chuck No.

Form E lead chamfer: 1.25 Tap Thread Size, DLC Coated Ds: 8 mm Shank square: 6.

D1 = 0 / -0.01 mm.

Tolerances: Neck Dia.8 mm Overhang length L1 incl.

65 mm Height: 18 mm

M34X1. Closed, pre-slit form, with tapered lead chamfer on both sides.5 mm External Dia.

of teeth Z: 3 Flute length Lc: 26 mm Overhang length L1 incl.

of teeth Z: 3 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HB to h6 No. Knuckle form profile.. Through-coolant: yes Tolerance nominal Dia.

Note: For reliable use of the micro-drills from 8xD, a pilot hole of at least 4xD is required using the micro-pilot drill 121223.

003 mm, a sufficiently high coolant pressure at least 30 bar, as well as sufficiently fine filtration of the cooling medium DC Please always ensure that the pilot hole is free from chips before using the subsequent drilling tool.. The increased metal removal rates and longer tool life ensure an economical drilling process, even with very small hole diameters combined with a large L/D ratio.