In/Out Thermometer/Clock, Product Type Vehicle Thermometer, Material Plastic, Color Silver, Includes Battery, Hook-and-Loop Mounting Tape.

-11, Connector Type Threaded Hole, Backup Pad Shape Round, Device Material Rubber, Density Medium, Maximum Operating Speed 6,000 RPM, Number of Vacuum Holes Non-Vacuum, Color Black, Overall Width 7 in, Overall Diameter 7 in, Product Type Disc Backup Pad.Hook-and-Loop Disc Backup Pad, Abrasive Mount Type Hook and Loop, Abrasive Mounting Quick Change System Not Applicable, Connector Size 5/8 In.

Thread Cutting Screw, Finish Zinc Plated, Material Steel, Head Style Pan, Drive Phillips, Thread Size #4-40, Fastener Length 3/8 in, Head Type Pan, Head and Washer Height 0.

69 in.

Socket Head Cap Screw, Head Type Standard, System of Measurement Metric, Drive Type Socket, Drive Size 12 mm, Material Steel, Material Grade/Class Class 12.9, Finish Zinc Plated, Thread Size M14-2, Minimum Thread Length 40 mm, Fastener Length 60 mm, Head Height 14 mm, Head Diameter 21 mm, Pack Size Small Pack, Thread Style Partially Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards DIN 912, Flange Diameter Not Applicable.

-11, Barrel Length 3/4 in, Barrel Diameter 3/4 in, Barrel Thread Depth 3/8 in, Barrel Drive Size 3/8 in, Barrel Head Diameter 1 1/8 in, Barrel Head Height 1/4 in, Dimensional Standards AMPG 2000 SB.Architectural Sex Bolt, Finish Plain, Material 18-8 Stainless Steel, Barrel Head Style Flat, Barrel Drive Type Internal Hex, Thread Size 5/8 In.

Row Spacer, Overall Depth 3 1/4 in, Overall Height 1 5/8 in, Overall Width 8 in, Steel, Gray, Galvanized, Hardware, RMI.

09375 in, Collar Diameter 0.

DC Gearmotor, Shaft Orientation Parallel, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 90V DC, Motor Type Permanent Magnet DC, Nameplate Speed 29 RPM, Maximum Torque 156 in-lb, Overhung Load Capacity 300 ft-lb, Rotation CW/CCW, Mounting Orientation Any Angle, Gear Ratio 55:1, Input Horsepower 1/10 hp, Output Shaft Diameter 3/4 in, Bearing Type Ball on Motor, Porous Bronze Sleeve on Case.

AC/DC Gearmotor, Shaft Orientation Right Angle, Output Location Left Hand, Motor Enclosure Open Air-Over, Operating Voltage 115V AC, Motor Type Universal AC/DC, Nameplate Speed 13 RPM, Maximum Torque 84 in-lb, Overhung Load Capacity 100 ft-lb, Rotation CW/CCW, Mounting Orientation Any Angle, Gear Ratio 391:1, Input Horsepower 1/6 hp, Motor Insulation Class B, Frequency 50 Hz, 60 Hz, Output Shaft Diameter 1/2 in, Bearing Type Ball on Motor, Porous Bronze Sleeve on Case.

45 Degrees Long Radius Elbow, Stainless Steel, 316L, For Pipe Schedule 40, 2 1/2 in, Butt Weld, 2 1/2 in, Butt Weld, Refer to Specification Maximum Operating Pressure.

Stub End Type A, Stainless Steel, 304L, For Pipe Schedule 10, 1/2 in, Butt Weld, 13/16 in, Butt Weld.

591 in, Includes Set Screws, Keyway Yes, Keyway Depth 3/32 in, Keyway Width 3/16 in, Length through Bore 7/8 in, Material Grade 1045.089 in, Bore Type Fixed, Chain Number 40, Finish Black Oxide, For Pitch Type Single Pitch, Hub Diameter 1 9/16 in, Hub Projection 0.33 in, Pitch Diameter 2.Single Strand Sprocket, Bore Diameter 3/4 in, For Chain Pitch 1/2 in, For Number of Strands Single, Hub Type One Side, Material Steel, Maximum Bore Diameter 3/4 in, Number of Teeth 13, Outside Diameter 2.

3, Pack Size Small, Type Standard Machine Screw, Maximum Head Width 0.

Coolescer, Flow Rate 1 GPM, Removes Tramp Oils And Adds Oxygen To The Cleaned Cooant.

Circular Paper Chart, Compatible with Manufacturer Model Number TH621, TH622, TH623, TH625, TH6P1, TH6P2, TH6P3, Lowest Generic Number Recorded Not Applicable, Minimum DC Current Measurement Not Applicable, Product Type Circular Paper Chart, Strip Chart Length Not Applicable, Strip Chart Width Not Applicable, Highest Generic Number Recorded Not Applicable, Maximum AC Current Measurement Not Applicable, Maximum AC Voltage Measured Not Applicable, Maximum DC Voltage Measured Not Applicable.

1-1/4" Heavy-Duty Self-Feed Bit Wood Drilling Bit, Self Feed, Shank Size 7/16 in, Overall Length 5 1/8 in, For Standard Pipe Sz..

Socket Bit Set, Tip Size 1/4 in, 1/8 in, 3/16 in, 3/8 in, 5/16 in, 5/32 in, 7/32 in, Tip Style Hex, Insert Length 5 in, Overall Length 6 3/32 in, Drive Size 3/8 in, Number of Pieces 7, Alloy Steel, Chrome, SAE, Insulated No.

Thumb Screw, Grip Style Knurled, Type Thumb Screw, Finish Plain, Material 18-8 Stainless Steel, Thread Size #6-32, Fastener Length 1 in, Head Width 0.125 in, System of Measurement Inch, Head Material 18-8 Stainless Steel, Package Quantity 5.125 in, Head Height 0.125 in, Tensile Strength 80,000 psi, Head Type Knurled, Maximum Head Height 0.

Brown Viton O-Ring, Dash 252. Range -15 Degrees to 400 Degrees F, FDA Approved FDA Approved 5. O-Ring, Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia. 5.

Brown Viton O-Ring, Dash 446. O-Ring, Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.025 in, Temp.4 in, Actual Width 0.

44.6 mm, Actual Width 2.4 mm, Actual Inside Dia.

O-Ring, Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Metric, Cross Section Shape Round, O-Ring Material Buna N, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.8 mm, Nominal Width 1 mm, Actual Inside Dia.

O-Ring,Buna N,41mm OD,PK25. Range -40 Degrees to 250 Degrees F 41 mm, Temp. O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Metric, Cross Section Shape Round, O-Ring Material Buna N, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.

Hex Reducing Bushing, Stainless Steel, 316, Class Class 3000, For Pipe Schedule 160, 4 in, Male, NPT, 3 in, Female, NPT, Refer to Specification Maximum Operating Pressure.

100 in SP 187 cfm, Airflow @ 0.

Tire Bead Breaker, Small, Compatible with Brand Slide-Sledge, Compatible with Grainger Part Number 1TFX3, 1TFX4, 1TFX5, 1TFX6, Compatible with Manufacturer Model Number 211103, 211105, 211203, 211205, 211301, 211303, 211401, 211403, Includes -, Product Type Tire Bead Breaker.

Hazardous Location Motor, Three Phase, Motor Design 3-Phase, 2 HP, Nameplate RPM 1,760, No.2-6. Code T3B, Motor Enclosure Design Totally Enclosed Fan-Cooled, Duty Cycle Continuous, Motor Mounting Type Face/Base Class F, Hazardous Location Class 1 C,D / 2 E,F,G, Temp.0 A, 145TC Frame, Usable @ 208V Yes, Usable @ 200V No, Hz 60 Hz, Max.

Long Nut, Application Air, Flammable Liquid, Freon, Inert Gases, Non-Combustible Gases, Fitting Thread Size 1/2-20, Flare Angle 45 Degrees , Fitting Material Brass, Hex Size 5/8 in, Maximum Operating Pressure 2,800 psi, Maximum Operating Temperature 250 Degrees F, Overall Length 1 1/8 in, Specific Fitting Shape Long Nut, Compatible Tube Outer Diameter 5/16 in, Standards SAE J512, SAE J513, Fitting Connection Type Flared, Minimum Operating Temperature 65 Degrees F, Package Quantity 10.

Reducing Bushing, CPVC, Schedule 80, For Pipe Schedule 80, 2 in, Male, Spigot, 2 3/8 in, 3/4 in, Female, NPT, 2 1/2 in, 14, Includes Seal No, For Pipe Outside Diameter 2 in, 1 3/4 in Overall Length, 200 psi @ 73 Degrees F Maximum Operating Pressure, 32 Degrees to 200 Degrees F.