Caster Wheel,Rubber,5 In.,190 Lb.

Caster Wheel,Rubber,5 in.,190 lb.

, 1 1/4 in Wheel Width, Rubber Wheel/Tread Material, Firm, 95 Shore A, Plain, Standard Tread Shape, 5/16 in For Axle Size, Not Included Includes Spanner Bushing, Rubber Wheel Core Material, No Non-Marking, 1 1/2 in Hub Length.Solid Rubber Wheel, 190 lb Load Rating, 0 to 299 lb Load Rating Range, 5 in Wheel Dia.

Surf Grinding Whl,14x1x5,T1,WA60-I-V

Item Surf Grinding Whl,14x1x5,T1,WA60-I-V.

of Speeds 1, Voltage 230V AC, Full Load Amps 4.9-5.0/2.5 A, 56C Frame, Usable @ 208V Yes, Hz 60 Hz, Motor Service Factor 1.15, Max.

Class B, NEMA Design B, Motor Enclosure Design Totally Enclosed Fan-Cooled, Motor Shaft Rotation CCW, Motor Mounting Type Face, Motor Shaft Design Keyed, Motor Frame Material Steel Ambient Temp. General Purpose Motor, Three Phase, Motor Design 3-Phase, 1 1/2 HP, Nameplate RPM 3,450, No..

Abrasive Roll,1.5x50 yd.,A/O,400G

,A/O,400G.Abrasive Roll,1.

x 5/16

End Mill,HP,Carbide,Square,3/16" x 5/16 End Mill,HP,Carbide,Square,3/16 In..

Diamond Turning Insert, Round, 0.2362 in

2362 in, Bright (Uncoated).Diamond Turning Insert, Inscribed Circle 0.

Trizact Cloth Belt 307EA,3-1/2inx15-1/2i

Trizct Clth Blt 307EA,3-1/2x15-1/2 In.

Trizact PSA Film Disc Roll 568XA, 5inx5/

.

Cartridge Roll 747D, 3/8inx1-1/2inx1/8in, 80 X-wt, 100/pk

Ctrdg Rll 747D,3/8inx1-1/2inx1/8in,PK100, Package Quantity 100.

Blower Control Fan Timer Board

Blower Control Board, Product Type Blower Control Board, Compatible with Brand Armstrong Furnace.

LFIC Cylindr Housing wth Core,C145Keyway

Interchangeable Core Cylinder, Finish Satin Chrome, Material Brass, Steel, Keyway Type C145, For Door Thickness 1 3/4 in, Number of Pins 6, For Use With Schlage FSIC Locking Hardware.

O-Ring,Viton,A-018

O-Ring, For Use With Classic Convection with 6-Gallon Kettle & Electric 15 psi Boiler, Convection Steamer with 6-gallon Kettle & Gas 15 psi Boiler, Direct Steam Table Top Mixer, Table-Top Direct Steam Kettle on SD Stand, Tabletop Direct Steam Kettle, Product Type O-Ring.

End Mill,Carbide,GP,Square,11mm x 25mm

End Mill,Carbide,GP,Square,11mm x 25mm.

Gnrl Prpse End Mill, Sqr, HSS, 1/2 x 1-1/4, Number of Flutes: 4

Gnrl Prpse End Mill,Sqr,HSS,1/2 x 1-1/4 In..

Gnrl Purpse End Mill, Ball End, 3/4x1-5/8, Overall Length: 3-7/8

.Gnrl Purpse End Mill,Ball End,3/4x1-5/8 In.

Carbide Micro End Mill,Ball,0.013x0.039

Carbide Micro End Mill,Ball,0.

x 1/2 In.

Brass Lead Free Connector, Compression x MNPT Brass Compression x Male Connector,Lead Free,1/4 In..

Carbide De Countersink 1F 60Deg 5/8

Carbide De Countersink 1F 60Deg 5/8 In.

Carbide Corner Rounder R 1/16 1/16 D, Number of Flutes: 3

Carbide Corner Rounder R 1/16 1/16 D.

Aero Rougher End Mill, R0.25mm, 1-1/4, Length of Cut: 3

25mm,1-1/4 In..

End Mill, Carbide, GP, Ball, 1mm x 3mm, Number of Flutes: 2

End Mill,Carbide,GP,Ball,1mm x 3mm.

x 1

.

Gnrl Prpse End Mill, Crbd, Ball End, 3/8x1, Number of Flutes: 4

.Gnrl Prpse End Mill,Crbd,Ball End,3/8x1 In.

Gnrl Purpse End Mill,Carbide,Sqr,1/8x1/4

Gnrl Purpse End Mill,Carbide,Sqr,1/8x1/4.

End Mill, Carbide, GP, Square, 3.5mm x 12mm, Number of Flutes: 3

5mm x 12mm.End Mill,Carbide,GP,Square,3.

CB Drop,Ear Elbow,1/2 FIP x 90 deg.

.CB Drop,Ear Elbow,1/2" FIP x 90 deg.

Carbide De Countersink 100Deg 1/2, Number of Flutes: 6

Carbide De Countersink 100Deg 1/2 In..

Drill,Spot 1ARB TiALN 2FL

Drill.

Indexable Boring Bar, FCBI20350015R, 2-1/2 in L, Carbide, Triangle Insert Shape

1260 in, T7 Insert Screw, Coolant Through, Turning, Right Hand.Indexable Boring Bar, Insert Shape Triangle, Overall Length 2-1/2 in, FCBI20350015R, 95 Degrees , 0.

Indexable Thread Turning Tool Holder, AVR253L, 250.00mm L, High Speed Steel, Triangle Insert Shape

00mm, AVR253L, 15.Indexable Thread Turning Tool Holder, NA-VR, Insert Shape Triangle, Overall Length 250.41mm, Coolant Through, Inside Diameter Internal Threading, Left Hand.