reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.•Helps to eliminate leaks in many applications, such as faucet drips at the spout•Nitrile rubber construction•Tough, flexible rubber construction•Dimensions: Interior Diameter: 1 7/16", Width Diameter.: 1/8 ", Outside Diameter: 1 11/16")
    • The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.•Helps to eliminate leaks in many applications, such as faucet drips at the spout•Nitrile rubber construction•Tough, flexible rubber construction•Dimensions: Interior Diameter: 2 9/16", Width Diameter.: 3/32 ", Outside Diameter: 2 3/4")
    • The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.•Helps to eliminate leaks in many applications, such as faucet drips at the spout•Nitrile rubber construction•Tough, flexible rubber construction•Dimensions: Interior Diameter: 5 1/8", Width Diameter.: 3/16 ", Outside Diameter: 5 1/2")
    • The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.•Helps to eliminate leaks in many applications, such as faucet drips at the spout•Nitrile rubber construction•Tough, flexible rubber construction•Dimensions: Interior Diameter: 5 1/8", Width Diameter.: 1/8 ", Outside Diameter: 5 3/8")
    • The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.•Helps to eliminate leaks in many applications, such as faucet drips at the spout•Nitrile rubber construction•Tough, flexible rubber construction•Dimensions: Interior Diameter: 7 1/2", Width Diameter.: 1/8 ", Outside Diameter: 7 3/4")
    • The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.•Helps to eliminate leaks in many applications, such as faucet drips at the spout•Nitrile rubber construction•Tough, flexible rubber construction•Dimensions: Interior Diameter: 10 1/2", Width Diameter.: 1/4 ", Outside Diameter: 11")
    • The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.•Helps to eliminate leaks in many applications, such as faucet drips at the spout•Nitrile rubber construction•Tough, flexible rubber construction•Dimensions: Interior Diameter: 11/16", Width Diameter.: 3/16 ", Outside Diameter: 1 1/16")
    • The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.•Helps to eliminate leaks in many applications, such as faucet drips at the spout•Nitrile rubber construction•Tough, flexible rubber construction•Dimensions: Interior Diameter: 2 7/8", Width Diameter.: 1/4 ", Outside Diameter: 3 3/8")
    • The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.•Helps to eliminate leaks in many applications, such as faucet drips at the spout•Nitrile rubber construction•Tough, flexible rubber construction•Dimensions: Interior Diameter: 7 3/4", Width Diameter.: 1/4 ", Outside Diameter: 8 1/4")
    • The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.•Helps to eliminate leaks in many applications, such as faucet drips at the spout•Nitrile rubber construction•Tough, flexible rubber construction•Dimensions: Interior Diameter: 5/16", Width Diameter.: 1/16 ", Outside Diameter: 7/16")
    • The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.•Helps to eliminate leaks in many applications, such as faucet drips at the spout•Nitrile rubber construction•Tough, flexible rubber construction•Dimensions: Interior Diameter: 15/16", Width Diameter.: 1/8 ", Outside Diameter: 1 3/16")
    • The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.•Helps to eliminate leaks in many applications, such as faucet drips at the spout•Nitrile rubber construction•Tough, flexible rubber construction•Dimensions: Interior Diameter: 5/8", Width Diameter.: 3/16 ", Outside Diameter: 1")
    • Full of clean lines and streamlined details, bright metallics are contrasted against with pearl black.
    • When Tight, The Wedging Action Of Sleeve Between Body And Nut Create A Leak Free Connection.

    When Tight, The Wedging Action Of Sleeve Between Body And Nut Create A Leak Free Connection.

    AGS Brass And Steel Fittings Are Comprised Of Tube Nuts, Unions (Couplers), Adapters, Elbows, Tees, Bushings, Connectors, Grease, Etc. They Are Generally Used To Connect Lengths Of Copper, Brass, And Aluminum Tubing. Compression Unions Are Used In Low-Pressure Applications Such As: Air, Oil, And Water.

    • 7/8 x 109 Blue V-Belt Made With ARAMID (7/8 Top Width, 17/32 Deep)

    7/8 x 109 Blue V-Belt Made With ARAMID (7/8 Top Width, 17/32 Deep)

    AFTERMARKET C105K 7/8" x 109" Blue V-Belt Made With ARAMID (7/8" Top Width,.

    • Pto Adapter 118 TO 138 Extends Shaft To 538 Long

    Pto Adapter 118 TO 138 Extends Shaft To 538 Long

    One New Aftermarket Replacement Heavy Duty Pto Adaptor Fits Massey Ferguson ModelsTech Info4 34 Long1 186 X 1 386Replaces Part NumbersbT353Fspan.

    • Time Delay Valve VZOA-3-1/4

    Time Delay Valve VZOA-3-1/4

    Time Delay Valve Vzoa-3-1/4 Operating Pressure=0 - 10 Bar, Standard Nominal Flow Rate=600 L/Min, Adjustable Delay Times=0 - 30 S, Operating Medium=Compressed Air In Accordance With Iso8573-1:2010 [7:-:-], Note On Operating And Pilot Medium=Lubricated Operation Possible (Subsequently Required For Further Operation).

    • Electrical Connection Box VAVE-L1-1VL4-LP

    Electrical Connection Box VAVE-L1-1VL4-LP

    Electrical Connection Box Vave-L1-1Vl4-Lp Polarity Protected=Bipolar, Additional Functions=Spark Arresting, Signal Status Display=Led, Nominal Operating Voltage Dc=(* 12 V, * 24 V), Surge Strength=0,8 Kv.

    • Size=Midi, Series=D, Actuator Lock=Rotary Knob With Lock, Assembly Position=Any, Design Structure=Directly-Controlled Diaphragm Regulator
    • Size=8, Design=For T-Slot, Corrosion Resistance Classification Crc=3 - High Corrosion Stress, Ambient Temperature=-40 - 120 °C, Mounting Type=(* Clamped In T-Slot, * Insertable Into Slot Lengthwise)
    • Size=Standard, Nominal Size=0,098 ", Type Of Seal On Screw-In Stud=Sealing Ring, Assembly Position=Any, Design Structure=Push/Pull Principle

    Size=Standard, Nominal Size=0,098 ", Type Of Seal On Screw-In Stud=Sealing Ring, Assembly Position=Any, Design Structure=Push/Pull Principle

    Push-In Fitting QB-10-32-UNF-3/16-U Push-In Fitting Qb-10-32-Unf-3/16-U Male Thread With External Hexagon..

    • Finger Lever Valve VHEF-L-M52-M-G14

    Finger Lever Valve VHEF-L-M52-M-G14

    Finger Lever Valve Vhef-L-M52-M-G14 Valve Function=5/2 Monostable, Type Of Actuation=Manual, Width=20 Mm, Standard Nominal Flow Rate=1200 L/Min, Operating Pressure Mpa=-0,095 - 1 Mpa.

    • Size=Standard, Nominal Size=6,7 Mm, Material Fire Test=(* Ul94 V-0 (Housing), * Ul94 V-0 (Releasing Ring)), Type Of Seal On Screw-In Stud=Coating, Design Structure=Push/Pull Principle
    • Reducing Sleeve NPFC-R-G12-G18-F

    Reducing Sleeve NPFC-R-G12-G18-F

    Reducing Sleeve Npfc-R-G12-G18-F Material Threaded Fitting=Nickel-Plated Brass, Container Size=10, Operating Pressure=-0,95 - 50 Bar, Operating Medium=Compressed Air In Accordance With Iso8573-1:2010 [-:-:-], Corrosion Resistance Classification Crc=1 - Low Corrosion Stress.

    • Connecting Cable NEBB-M12G5-P-2.5-LE5

    Connecting Cable NEBB-M12G5-P-2.5-LE5

    Connecting Cable Nebb-M12G5-P-2.5-Le5 Conforms To Standard=(* Core Colours And Connection Numbers To En 60947-5-2, * En 61076-2-101), Cable Identification=With Inscription Label Holder, Electrical Connection 1, Function=Field Device Side, Electrical Connection 1, Design=Round, Electrical Connection 1, Connection Type=Plug Socket.

    • Installation Height=4000 M, Note On Max.

    Installation Height=4000 M, Note On Max.

    25% Per Degree Celsius, Max.0% Per 100 M, Storage Temperature=-20 - 70 °C Servo Motor Emmt-As-100-L-Hs-Rmb Ambient Temperature=-15 - 40 °C, Note On Ambient Temperature=Up To 80° C With Derating Of -2.

    • Cantilever Axis ELCC-TB-KF-60-300-0H-P0-CR

    Cantilever Axis ELCC-TB-KF-60-300-0H-P0-CR

    Cantilever Axis Elcc-Tb-Kf-60-300-0H-P0-Cr Effective Diameter Of Drive Pinion=30,558 Mm, Working Stroke=300 Mm, Size=60, Stroke Reserve=0 Mm, Toothed-Belt Pitch=3 Mm.

    • Design=Angular, Based On The Standard=(* En 60947-5-2, * Vdi/Vde 3845), Authorisation=(* Rcm Mark, * C Ul Us (Ol)), Ce Mark (See Declaration Of Conformity)=To Eu Directive For Emc, Kc Mark=Kc-Emv

    Design=Angular, Based On The Standard=(* En 60947-5-2, * Vdi/Vde 3845), Authorisation=(* Rcm Mark, * C Ul Us (Ol)), Ce Mark (See Declaration Of Conformity)=To Eu Directive For Emc, Kc Mark=Kc-Emv

    .Sensor Box SRBG-C1-N-1-P-M12 Sensor Box Srbg-C1-N-1-P-M12 For Electrical Feedback And Position Monitoring Of Process Valves Actuated With Pneumatic Quarter Turn Actuators, Inductive Measuring Principle.

    • Pressure Regulator VRPA-C-Q8-E

    Pressure Regulator VRPA-C-Q8-E

    Pressure Regulator Vrpa-C-Q8-E Controller Function=(* Output Pressure Constant, * With Secondary Exhaust, * With Return Flow), Pneumatic Connection, Port 1=Qs-8, Pneumatic Connection, Port 2=Qs-8, Mounting Type=With Through Hole, Standard Nominal Flow Rate=130 L/Min.

    • Bending Radius=28 Mm, Tubing Characteristics=Suitable For Energy Chains In Applications With High Cycle Rates

    Bending Radius=28 Mm, Tubing Characteristics=Suitable For Energy Chains In Applications With High Cycle Rates

    Plastic Tubing PUN-H-10X1,5-SI-300 Plastic Tubing Pun-H-10X1,5-Si-300 Approved For Use In Food Processing (Hydrolysis Resistant) Outside Diameter=10 Mm, Bending Radius Relevant For Flow Rate=52 Mm, Inside Diameter=7 Mm, Min.

    • PREVIOUS 173757 173758 173759 173760 173761 173762 173763 173764 173765 173766 173767 173768 173769 173770 173771 173772 173773 NEXT