Plug Gage,Tool Steel,0.6637 In. Dia.

Plug Gage,Tool Steel,0.6637 in. dia.

0001 in, Diameter Range 0.

Plug Gage Assembly,2in.L,0.8025 in. dia.

7601 in to 1.

Plug Gage Assembly,2in.L,0.8998 in. dia.

9000 in, Dimension Type Inch, Gauge Type No-Go (Minus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.Class X No-Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.

Plug Gage,Go Type,Class X,0.5477in. dia.

00004 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025.5451 in to 0.5500 in, Dimension Type Inch, Gauge Type Go (Plus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.0001 in, Diameter Range 0.

Plug Gage,Tool Steel,0.3927 in. dia.

3901 in to 0.00004 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025.

Plug Gage,Go Type,Class X,0.5143in. dia.

5150 in, Dimension Type Inch, Gauge Type Go (Plus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.0001 in, Diameter Range 0.Class X Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.

Plug Gage,Tool Steel,0.3769 in. dia.

2811 in to 0.3751 in to 0.Class X No-Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.00004 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025.

Plug Gage,Tool Steel,0.7994 in. dia.

00004 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025.7994 in, Diameter Increment 0.0000 in, Diameter Sub-Range 0.0001 in, Diameter Range 0.

Plug Gage,Tool Steel,0.6454 in. dia.

6500 in, Dimension Type Inch, Gauge Type No-Go (Minus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.Class X No-Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.00004 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025.

Plug Gage,Tool Steel,0.9780 in. dia.

0000 in, Diameter Sub-Range 0.0001 in, Diameter Range 0.

Plug Gage Assembly,2in.L,0.9770 in. dia.

00006 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025.9751 in to 0.7601 in to 1.Class X No-Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.

Plug Gage,Go Type,Class X,0.5272in. dia.

Class X Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.5251 in to 0.0001 in, Diameter Range 0.5272 in, Diameter Increment 0.

Plug Gage,Tool Steel,0.3880 in. dia.

3851 in to 0.3880 in, Diameter Increment 0.0001 in, Diameter Range 0.

Plug Gage,Tool Steel,0.4544 in. dia.

0001 in, Diameter Range 0.4061 in to 0.Class X No-Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.

Plug Gage,Tool Steel,0.6676 in. dia.

Class X No-Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.6676 in, Diameter Increment 0.

Pin Gage, Plus, Class ZZ, 0.24mm

20mm to 1.20mm to 0.01 mm, Diameter Range 0.49mm, Dimension Type Metric, Gauge Type Go (Plus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 10 Microinch or Better, Tolerance 0.

Plug Gage Assembly,2in.L,0.8361 in. dia.

00006 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025.8351 in to 0.

Plug Gage,Tool Steel,0.5393 in. dia.

Class X No-Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.5101 in to 0.6350 in, Diameter Sub-Range 0.0001 in, Diameter Range 0.

#2 Black/Gold Jobber Length Drill Bit

Jobber Drill Blank, Wire, High Speed Steel, #2.

Taperlock Thread Plug Gage,M16x1.50 Size

03 mm, Standards ASME B1.50, Thread Type Metric, Tolerance Class X, Gauge Finish Chrome Plated, Gauge Length - Go Member 22.16M, Thread Direction Right Hand.

Plug Gage,Class X,0.0101 in. dia.

0040 in to 0.Class X Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.0250 in, Diameter Sub-Range 0.

Plug Gage,No Go Type,0.0496 in. dia.

0750 in, Diameter Sub-Range 0.0001 in, Diameter Range 0.0251 in to 0.

Plug Gage,No Go Type,0.0606 in. dia.

0650 in, Dimension Type Inch, Gauge Type No-Go (Minus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.0001 in, Diameter Range 0.

Plug Gage,No Go Type,0.0582 in. dia.

0582 in, Diameter Increment 0.Class X No-Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.0251 in to 0.0750 in, Diameter Sub-Range 0.

Plug Gage,No Go Type,0.0520 in. dia.

0501 in to 0.

Plug Gage,Class X,0.1086 in. dia.

0001 in, Diameter Range 0.00004 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025.1051 in to 0.0751 in to 0.

Plug Gage,Class X,0.1664 in. dia.

1651 in to 0.

Plug Gage,No Go Type,0.2487 in. dia.

0751 in to 0.00004 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025.2810 in, Diameter Sub-Range 0.

Plug Gage,Class X,0.2273 in. dia.

Class X Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.2300 in, Dimension Type Inch, Gauge Type Go (Plus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.2251 in to 0.00004 in, Tolerance Class X, Hardness RC 60/65, Long Form Calibration Certificate No, Overall Length 2 in, Standards ISO 17025.

Plug Gage,No Go Type,0.2789 in. dia.

2810 in, Diameter Sub-Range 0.2789 in, Diameter Increment 0.