pMMM p.

1560" (5/32) Length of Cut Carbide Ball End Mill for Plastic, 2 Flutes.0.0312" (1/32) Cutter DIA x 0.

6250" (2-5/8) Length of Cut Carbide Square Upcut End Mill for Plastic, 2 Flutes, Amorphous Diamond Coated.5000" (1/2) Cutter DIA x 2.

. Note: HB shanks are available at the same price as HA.

1 mm Overhang length L1 incl. D1: 0. e.5 mm Recess Dia.

D1: 11 mm Overall length L: 120 mm Shank Dia. of teeth Z: 3 Helix angle: 45 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h6 Balance quality with shank: G 2.5 with HA No.

112120, 112140 and 112170 with 142 Deg tip angle for enhanced process reliability.5 mm With specially shaped slots. Precision ground point. Recommendation: Maximum drilling depth: L2 = LC 1.

Special surface treatment.Woodruff Keyseating Cutter, Uncoated, 10.

.No need to procure special collets when using GARANT-NC reamers. Solid Carbide Machine Reamer, Uncoated, 10 mm This ensures the highest concentricity. for standard chucking especially in hydraulic chucks or high precision collet chucks.

Version suitable for NC similar to DIN 8093 with straight shank Dia..

5 x DC. Note: Flute length LC = L2 + 1.Pro INOX Solid Carbide Drill for Stainless Steels, Plain Shank, AlTiN Coated, 1 mm Increased wear resistance due to improved carbide substrate and high temperature resistant coating. Efficient drilling especially for use in stainless and acid-resistant steels.

9 mm equal..Solid Carbide Jobber Drill, Uncoated, 5.

Profile ground: High concentricity and pitch accuracy, drills for series production use.HSS Jobber Drill, TiN Coated, 2 mm Precision ground point..

Advantage: The 180 Deg point angle permits drilling and counterboring in a single operation.

For the highest demands regarding performance and precision in Fiber-reinforced composites, CRP, GRP, and graphite. of teeth Z: 2 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h5 No. recess: 15 mm Recess Dia.

HSS-E-PM Parabolic Jobber Drill, TiAlN Coated, 2.

With the latest generation of crystalline diamond coating sp3, for process reliability in machining Fiber-reinforced composites, CRP, GRP and graphite. of teeth Z: 2 Flute length Lc: 4 mm Overhang length L1 incl. of teeth Z: 2 Helix angle: 30 degrees No.

8 mm Note: Flute length LC = L2 + 1.

2 mm Note: Flute length LC = L2 + 1.5 x DC.Solid Carbide Coolant Through HPC Drill for Titanium/Inconel, Plain Shank, TiAlSiN Coated, 12..

Vaporized from 2.

Special multi-nano layer coating for drilling in hardened steels.Diabolo Solid Carbide Coolant Through HPC Drill, Plain Shank, TiAlN Coated, 1. Cutting chisel edge with high centering accuracy due to strong core and special point geometry..

e8 No. For roughing and finishing up to 1.

9 mm Note: Flute length LC = L2 + 1.

Solid Carbide Coolant Through Drill for Titanium/Inconel, 6XD, Plain Shank, TiAlSiN, 13 mm Note: Flute length LC = L2 + 1.. Specially for machining titanium-based and nickel-based alloys.5 x DC.

As a result, the tool maintains an extremely stable core..

Replacement for Hoover Platinum Stick.

ILB GOLD 600000000000 Bulb, Fluorescent Germicidal Uvc G5 Base, Replacement For.

CC640WN PARTS SUPPLIES INK TONER DRUMS.

DR200 PARTS SUPPLIES INK TONER DRUMS.

T034520 PARTS SUPPLIES INK TONER DRUMS.