Precise Concentricity For Exact Holes.

Precise concentricity for exact holes.

HSS-E-PM Jobber Drill, TiAlN Coated, 5 mm Shank to DIN 1835A. Particularly strong due to strengthened core and a parabolic flute profile. Point geometry with rake angle correction.

D1: 8.7 mm Overall length L: 72 mm Shank Dia.

Eccentric relief ground. Solid Carbide End Mill, SiTiN, 9 mm Lengths similar to DIN 6527 long.5xD in solid material.

No.

Solid Carbide Deburring Mill, 120 Deg, TiAlN Coated, 3 mm Application: Perfectly suitable for chamfering and deburring component edges and for contouring applications..6 mm Overall length L: 50 mm Shank Dia.of teeth Z: 3 Dimension S: 1.

e8 No.

of teeth Z: 3 Flute length Lc: 13 mm Overall length L: 57 mm Shank Dia. Solid Carbide End Mill, AlCrN Coated, 4..5 mm Through-coolant: no Tolerance nominal Dia.

Note: Flute length LC = L2 + 1.5 x DC.

High roundness and alignment accuracy of the deep hole, thanks to 6 guide chamfers..

Nominal Dia.

Similar to DIN 6539 extra short. and shank Dia.Solid Carbide Drill, Extra Short, Uncoated, 6..

Nominal Dia.

Solid Carbide Drill, Extra Short, Uncoated, 4.8 mm equal. Similar to DIN 6539 extra short.

Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

With strengthened core. With point geometry shape C. Note: For suitable reducing adapters for tools with MT shanks see No. HSS-E Jobber drill, Uncoated, 13.

30.75 mm

33. Application: For Whitworth parallel pipe threads DIN-ISO 228/1 threads that do not form a seal within the connection. Reduced coefficient of friction due to the new high-performance coating..

122736 is necessary.

Note: Flute length LC = L2 + 1. New generation of high performance deep hole drills in the HPC range.

Advanced micro-geometry, convex cutting edge and conical profile grinding to provide additional stability for the main cutting edge.

Master Steel Solid Carbide Coolant Through HPC Drill, Plain Shank, TiAlN Coated, 8. Note: Flute length LC = L2 + 1. optimized flute geometry and patented face geometry for reliable chip evacuation in steel materials and cast material.5 x DC.

Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

Advantage: Especially suitable for long reach purposes. Vaporized from 2. 112103, 112110 and 112160 with 120 Deg tip angle for enhanced process reliability.

Ground flutes, with high concentricity.

5 x DC. Particularly robust and strong due to strengthened core..

Application: Drilling and deburring, maximum material thickness = step height see table.

12 mm Drill steps in increments of: 1 mm Shank: Three drive flats shank Step height: 4 mm Overall length: 88 mm Shank Dia. Stepped drill HSS-E, uncoated, Cutter Dia.figures shown in the flute. With cylindrical spotting drill, Dia.