Single Grit Utility Sharpening Stone, Overall Length 14 3/4 in, Abrasive Material Silicon Carbide, Grade Medium, Primary Material Application Stainless Steel, Aluminum, Brass, Bronze, Copper, Masonry, Titanium, Product Type Single Grit Utility Sharpening Stone, Color Gray.

Buna-N O-Ring, 4.5mm Wide 95mm ID, PK2.

19 mm, Actual Width 1 mm, Dash Number Not Applicable, Color Red, Durometer 70A, Meets/Exceeds FDA, Nominal Outside Dia. Range -80 Degrees to 450 Degrees F, FDA Approved FDA Approved 21 mm, Temp.19 mm, Nominal Width 1 mm, Actual Inside Dia. O-Ring, Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Metric, Cross Section Shape Round, O-Ring Material Silicone, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.

Buna-N O-Ring, 4mm Wide 58mm ID, PK20.

Buna-N O-Ring, 5mm Wide 225mm ID.225 mm, Nominal Width 5 mm, Actual Inside Dia. 225 mm, Actual Width 5 mm, Dash Number Not Applicable, Color Black, Durometer 70A, Nominal Outside Dia.

12.13 in, Nominal Width 1/4 in, Actual Inside Dia. Brown Viton O-Ring, Dash 455.525 in, Temp.

1 1/16 in, Nominal Width 1/16 in, Actual Inside Dia. 1.

Nipple, Application Air, Gas, Non-Potable Water, Oil, Steam, Finish/Coating Galvanized, Fitting Compatibility Schedule 40, Inside Diameter 6 1/16 in, Manufacture Location Made in USA*, Material Steel, Material Grade Grade B, Maximum Operating Pressure 150 psi @ 150 Degrees F, Metal Pipe Construction Welded, Nominal Pipe Size 6 in, Outside Diameter 6 5/8 in, Overall Length 6 in, Pipe Weld Type Electric Resistance Weld, Schedule Schedule 40, Side A Connection Type Threaded, Side A Gender Male.

Gas Detector Sensor, Gas Detected Oxygen, Measurement Range 0 to 30 Percent vol, Compatible Detector Model/Series GasBadge Pro, Compatible Detector Grainger Part Number 1TAY8, Sensor Type Electrochemical, For Detector Type Portable, Sensor Life 2 yr, Series GasBadge Pro, Resolution 0.1 ppm, Operating Temperature - Maximum 140 Degrees F, Operating Temperature - Minimum -40 Degrees F, Chemical Formula O2.

12, Water Absorption 0.

Exit Sign, Letter Color Green, Number of Faces 1, Directional Indicators - Emergency Lighting and Exit Signs Universal Field Selectable Chevrons, Lighting Technology LED, Housing Material - Emergency Lighting and Exit Signs Aluminum, Housing Color - Emergency Lighting and Exit Signs Black/Silver, Emergency Back Up Battery Yes, Battery Chemistry Nickel Cadmium, Voltage - Emergency Lighting and Exit Signs 120/277, Number of Lamp Heads 0.

Male Elbow, 45 Degrees, Application Air, Inert Gases, Non-Combustible Gases, Potable Water, Fitting Side A Connection Type Compression, Fitting Side B Connection Type MNPT, Fitting Material Brass, Fitting Side A Tube Outer Diameter 1/4 in, Maximum Operating Pressure 1,400 psi, Maximum Operating Temperature 200 Degrees F, Overall Length 7/8 in, Specific Fitting Shape 45 Degrees Elbow Adapter, Fitting Side B Pipe Size 1/8 in, Thread Size B 7/16-24, Series Compress-Align.

Wall Collar, For Blade Diameter 48 in, For Cut-Out Height 55 5/8 in, For Cut-Out Width 55 5/8 in, Thickness 18, Material Steel, Overall Depth 23 1/2 in, Overall Height 54 1/4 in, Overall Width 54 1/4 in, Finish Galvanized, Includes (4) Mounting Angle, (4) Side Panel.

151 in, Shank Length 1 1/2 in, System of Measurement Inch, Standards ASME B18.1, Includes Hairpin, Pack Size Small Pack, Manufacturer Location Made in USA*, Pin Diameter 1/2 in.Clevis Pin, Product Type Standard Clevis Pin, Material Stainless Steel, Finish Plain, Material Grade/Class 18-8, Head Type Headed, Head Diameter 5/8 in, Maximum Usable Length 1 17/64 in, Maximum Hole Size 0.8.

Union Elbow, Application Food Processing, Potable Water, Fitting Side A Connection Type Push-to-Connect, Fitting Side B Connection Type Push-to-Connect, Fitting Side A Tube Outer Diameter 1/4 in, Fitting Side B Tube Outer Diameter 1/4 in, Fitting Material Polypropylene, Color White, Includes Pre-Applied Thread Sealant No, Maximum Operating Pressure 150 psi, Maximum Operating Temperature 150 Degrees F, Specific Fitting Shape 90 Degrees Elbow, Standards NSF/ANSI 51, NSF/ANSI 61.

Elbow, Application Air, Fitting Side A Connection Type Push-to-Connect, Fitting Side B Connection Type Push-to-Connect, Fitting Side A Tube Outer Diameter 10 mm, Fitting Side B Tube Outer Diameter 10 mm, Fitting Material Brass, Color Silver, Includes Pre-Applied Thread Sealant Yes, Maximum Operating Pressure 290 psi, Maximum Operating Temperature 160 Degrees F, Specific Fitting Shape 90 Degrees Elbow.

2.-8, Hex Width 1 5/8 in, Hex Height 63/64 in, Manufacturer Location Globally Sourced, Dimensional Standards ANSI B18.Hex Nut, Hex Type Heavy Hex, Finish Black Oxide, Material Grade/Class Grade C, Material Steel, Thread Size 1 In.

Nipple, Application Air, Natural Gas, Non-Potable Water, Propane, Steam, Fitting Compatibility Schedule 80, Gravity Flow No, Inside Diameter 9/16 in, Material Stainless Steel, Material Grade 304, Maximum Operating Pressure 3347 psi @ 650 Degrees F, Maximum Operating Temperature 650 Degrees F, Metal Pipe Construction Seamless, Minimum Operating Temperature -20 Degrees F, Nominal Pipe Size 1/2 in, Outside Diameter 13/16 in, Overall Length 5 in, Schedule Schedule 80, Side A Connection Type Threaded.

Nipple, Application Air, Natural Gas, Non-Potable Water, Propane, Steam, Inside Diameter 1/2 in, Material Stainless Steel, Material Grade 316, Maximum Operating Pressure 150 psi, Maximum Operating Temperature 450 Degrees F, Metal Pipe Construction Seamless, Minimum Operating Temperature -60 Degrees F, Nominal Pipe Size 1/4 in, Outside Diameter 1/2 in, Overall Length 2 1/2 in, Schedule Schedule 40, Side A Gender Male, Side A Thread Type NPT, Side B Connection Type Unthreaded, Standards ASTM A733.

.Filter Element,10 Micron,15 GPM,150 PSI Pressure 150 psi, Primary Filter Removes Contaminants, Thread Size -, Seal Material Fluorocarbon Hydraulic Filter Element, Micron Rating 10, Filter Media - Filters Fiberglass, Max.

Roller Chain, Chain Construction Riveted Pin, Rollerless Bushing, Overall Length 10 ft, Material Stainless Steel, Chain Number 25, Chain Overall Width 0.339 in, Roller Diameter 1/8 in, Pitch 1/4 in, Number of Strands 1, Pin Contruction Riveted Pin, Pitch Type Single Pitch, Inside Width 0.125 in, Series SS, Working Load Limit 26 lb, Heavy Series No, Includes (1) Connecting Link, Lubrication SAE 10 to SAE 50, Material Grade Type 304, Maximum Operating Temperature 750 Degrees F.

953 in, Lacing 2 x 3, Overall Length 50 ft, Pitch 1 in, Tensile Strength 23,100 lb/in, Hole Diameter 0.

5 in, Off-White, Plastic Clarity Opaque, Tensile Strength 4,600 psi, Impact Strength 1.Sheet Stock, HDPE, Grade Standard, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 1.30 ft-lb/in, Friction Coefficient 0.

30 ft-lb/in, Friction Coefficient 0.01 Percent, Temperature Range -58 Degrees to 176 Degrees F, Plastic Hardness 70D.

-20, Material Steel, Overall Length 4 in, Product Type Mandrel, Compatible with Grainger Part Number 5JK71, For Use with Mfr Model Number M60303, Includes -.Mandrel, Compatible Tool Type Thread Setting Tool, Compatible Insert Type Rivet Nuts, Compatible Internal Thread Size 1/4 In.-20, Compatible External Thread Size 1/4 In.

45 Degrees Elbow, Polyvinylidene, Schedule 80, For Pipe Schedule 80, 3/4 in, Female, Socket, 3/4 in, Female, Socket, Includes Seal Yes, 1,360 psi @ 73 Degrees F Maximum Operating Pressure, 73 Degrees to 280 Degrees F.

45 Degrees Elbow, Polyvinylidene, Schedule 80, For Pipe Schedule 80, 1/2 in, Female, NPT, 1/2 in, Female, NPT, Includes Seal Yes, 2 3/16 in Overall Length, 1,360 psi @ 73 Degrees F Maximum Operating Pressure, 73 Degrees to 280 Degrees F.

3, Flange Diameter Not Applicable, Flange Thickness Not Applicable.

27 in, Pack Size Small Pack, Thread Style Partially Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards ASME B18.3, Flange Diameter Not Applicable, Flange Thickness Not Applicable.

Impact Socket, Socket Size 2 1/2 in, Socket Shape 6-Point, Drive Type Impact, Drive Size 1 1/2 in, Compatible Fastener Type Bolts, Screws, Studs, No, Alloy Steel, Black Oxide, Impact Rated Yes, Socket Depth Standard, Socket Length 4 in.