Glove, Cold Rated, Kevlar,XXL,Pair.

) 15 Degrees , Standard, Metric, Hex.Combination Wrench, Steel, Chrome, Head Size 26 mm, Overall Length 13 3/8 in, Head Offset Angle 15 Degrees , Opening Angle (Deg.

Open Reel Long Tape 300 Ft..

Planner Refill, Format One Month Per Two-Page Spread, One Week Per Two-Page Spread, Sheet Size 6-7/8 x 8-3/4 in, Paper Color White, Features Julian Dates, QuickNotes Section, Ruled Blocks.

V-belt, Belt Material Rubber, Edge Construction Wrapped, Industry Number 4L790, Number of Bands 1, Outside Length 79 in, Reinforcing Cord Material Aramid, Thickness 0.

5 in, Overall Height Not Applicable, Includes Safety Latch.Bottom Hook Assembly, Product Type Bottom Hook Assembly, Compatible Hoist Type Lever Chain Hoists, Compatible Load Capacity 18,000 lb, Compatible Series L5LB, Material Steel Alloy, Overall Length Not Applicable, Overall Width 8.

Mechanics Gloves, Additional Hazard Protection Abrasion-Resistant, Puncture-Resistant, Glove Style Mechanics, Cut-Resistance Coverage Full, Palm Style Not Applicable, Hand Protection Style Glove, ANSI/ISEA Impact Level 2, Backing Style Foam, Laminated Spandex, Cuff Style Hook-and-Loop, Glove Insulation Material Not Applicable, EN 407 Contact Heat Level Not Applicable, Insulated No, Maximum Temperature Not Applicable, Palm Material Goat-Grain, Silicone-Free No, Glove Liner Material Aramid.

Fiberglass Pool and Patio Screening.

75 in, Bolt Circle Diameter 3.25 in, Bolt Size Not Applicable, System of Measurement Inch, Bushing Diameter Not Applicable, Fastener Tightening Torque Capacity 11,300 in-lb, Flange Type Flangeless, Flange Width Not Applicable, For Shaft Type Keyed, Includes (2) Set Screws, Keyway Height 3/16 in, Keyway Width 3/8 in, Length Less Flange Not Applicable, Material Steel, Overall Diameter 3.375 in.Taper Lock Bushing, Bushing Type Taper Lock, Bore Bushing Series 2517, Bore Diameter 1 7/16 in, Length 1.

8mm,.

DURA-PRIME VS Belts are designed for industrial multi speed drives.2in OC. Belt, VS, 1.

Long Neck Metal Contour Scraper.

Check Valve, FKM.

76 psi, Seal Material Nitrile, Maximum Operating Temperature 140 Degrees F, Minimum Operating Temperature 14 Degrees F, System of Measurement Metric.526 psi, Minimum Operating Pressure 21.

End Mill,EWD05012R.

End Mill,EWD05050RU.

10-32X5/8 Phillips Flat Thread Cutting Screw Type F Fully Threaded 18-8 Stainless Steel.

Cutting Screws,4-40X1/4 PHIL PA,PK5000, Package Quantity 5000.

6-19X3/8 #5HD Slotted Indented Hex Washer High Low Fully Threaded 18-8 Stainless Steel.

625 X .0938 Deep Slotting Key Cutter.A .

8-18X1 1/4 Phil Oval Self Drilling Screw Full Thread 410 Stainless Steel.

Self Drilling Screws,8-18x5/8 P,Package Quantity 5000, Package Quantity 5000.

Self Drilling Screws,10-16x1 3/4,Package Quantity 700, Package Quantity 700.

3/32X5/8 MS9245, Extended Prong Chisel Point Cotter Pins T321 Stainless DFAR.

Machine Screws,10-32x2 SLOT TRU,PK1000, Package Quantity 1000.

Machine Screws,10-24x3/4 SLOT T,PK2000, Package Quantity 2000.

Machine Screws,10-24x1 6 LOBE F,PK3000, Package Quantity 3000.

1/4 NAS620 Flat Washer 300 Series Stainless Steel DFAR.

6-32X1/2 Phil Flat U/C Taptite Alternative Thread Rolling Full Thrd 18-8 S/S PassivateWax.

Hand Drive Socket 1/4 Inch Drive x 11/32.