reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
equal.

equal.

Nominal Dia. TiAlN coating for even better performance. Solid Carbide Drill, Extra Short, TiAlN Coated, 5.

    • of teeth Z: 4 Flute length Lc: 26 mm Corner radius R1: 2 mm Overhang length L1 incl.

    of teeth Z: 4 Flute length Lc: 26 mm Corner radius R1: 2 mm Overhang length L1 incl.

    D1: 11..Master Steel Solid Carbide Torus End Mill, TiAlN Coated, 12/2. of teeth Z: 4 Helix angle: 38 degrees Shank: DIN 6535 HB to h6 No.

    • Attention: Sizes ending with X = cutter dia tolerance h7.

    Attention: Sizes ending with X = cutter dia tolerance h7.

    Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials. Cutting chisel edge with high centring accuracy due to strong core and special point geometry. Note: Flute length LC = L2 + 1..

    • The movable special jaw anvil permits clamping diagonal workpieces up to 35 Deg .

    The movable special jaw anvil permits clamping diagonal workpieces up to 35 Deg .

    All-steel high-performance clamp with special jaw anvil- Jaw capacity: 250mm 12000 N..

    • Note: Flute length LC = L2 + 1.5 x DC.

    Note: Flute length LC = L2 + 1.5 x DC.

    DLC coating sp2 of the latest generation with low coefficient of friction results in outstanding chip clearance.

    • Excellent results when milling dry.

    Excellent results when milling dry.

    Eccentric relief ground. HSS-PM End Mill, TiAlN Coated, 12M mm. Multi-flute end mill.

    • With close tolerance jaw widths.
    • Extra long version.

    Extra long version.

    Exactly central ground point...

    • Note: HSK 40 and 50, Form A and E available ex works by the manufacturer.

    Note: HSK 40 and 50, Form A and E available ex works by the manufacturer.

    With RFID/Balluffchip bore.HSK mating faces machined. Application: For clamping tools with Weldon shank to DIN 1835 Form B and DIN 6535 Form HB.

    • Neck Dia.

    Neck Dia.

    05xDxapcorr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed! GARANT Diabolo: Special geometry, coating and carbide for hard machining in the high-performance field.g: vf = 18000 rpmx fz mm/Zx z No. Double-relief ground with 2 chamfers hollow ground for high-precision hard machining. Note: At greater tool overhang lengths, use a reduced value for ap! e.

    • Tolerance specifications: Size 0.6 - 0.9: Manufacturing or cutting edge tolerance 0/+0.004 mm.

    Tolerance specifications: Size 0.6 - 0.9: Manufacturing or cutting edge tolerance 0/+0.004 mm.

    02 mm This ensures the highest concentricity. Size 0. Version suitable for NC similar to DIN 8093 with straight shank Dia.

    • The abrasive caps can be replaced quickly and easily replace in direction of slots.

    The abrasive caps can be replaced quickly and easily replace in direction of slots.

    .553100. Grinding medium code: A Shape: A Abrasive cap : 10 mm Abrasive cap length: 15 mm recommended speed: 20000 min-1 Note: Compatible only for use with ground abrasive cap holder No. Aluminum Oxide Abrasive Cap, 320 Grit, Type: 1015A Application: The seamlessly formed abrasive caps slide on to the rubber body and are securely held in place by centrifugal force when the machine is running.

    • HSS-E-PM tool material for a high degree of wear resistance.

    HSS-E-PM tool material for a high degree of wear resistance.

    Tolerance class: 7GX Application: For components which are galvanized or shrink slightly when hardened.25 Tap Thread Size, AlTiX Coated Special geometry for optimum swarf evacuation. Reduced coefficient of friction due to the new high-performance coating..

    • Version: L-shank- based on DIN 911 / DIN ISO 2936 / ASME B18.3.

    Version: L-shank- based on DIN 911 / DIN ISO 2936 / ASME B18.3.

    9/32 inch L-wrench, Nickel-plated Nickel-plated..

    • With 5 screws to clamp the die.

    With 5 screws to clamp the die.

    Die Stock, for Die Diameter X Die Height: 20X5 mm Application: For direct mounting of solid and adjustable dies to EN 22568. Steel handle can be unscrewed. Standard: EN 22568 Overall length: 175 mm Number of fastening screws: 4 Up to size 65x25 of die-cast zinc, from size 75x20 of steel.

    • Application: For metric left-hand thread to DIN13 .

    Application: For metric left-hand thread to DIN13 .

    .Hand Tap Set, Left-Hand, 3 Pc, HSS-E, M14-2 Set of three, consisting of taper, second, and plug tap.

    • Application: For clamping tools with side flats to DIN 1835 B and DIN 6535 HB.

    Application: For clamping tools with side flats to DIN 1835 B and DIN 6535 HB.

    End Mill Holder, Form AD, SK 50, Projection: 100, Clamping Range: 25mm.

    • Note: Compatible only for use with ground abrasive cap holder No.

    Note: Compatible only for use with ground abrasive cap holder No.

    Ceramic Abrasive Cap, 220 Grit, Type: 1626A Ceramic grit CER ideal for working on stainless steels and nickel alloys. The abrasive caps can be replaced quickly and easily replace in direction of slots..

    • recess: 20 mm Recess Dia.

    recess: 20 mm Recess Dia.

    Extremely tight tolerances ensure maximum accuracy.95 mm Overall length L: 60 mm of teeth Z: 2 Flute length Lc: 1 mm Corner radius R1: 0. For the highest demands regarding performance and precision in Fiber-reinforced composites, CRP, GRP, and graphite.

    • For use in confined spaces one steel handle can be unscrewed.
    • recess: 15 mm Overall length L: 50 mm Shank Dia.

    recess: 15 mm Overall length L: 50 mm Shank Dia.

    Values for: slots milled from solid: ap = 0.01 mm.05xDxap korr side milling: ap = 0.

    • 90 95 Deg.

    90 95 Deg.

    Angled at approx.

    • 4 x M3 nozzle screws.

    4 x M3 nozzle screws.

    Application: For holding end mills and drills with parallel shank to h6 tolerance. Shrink-fit Holder with 4 Cooling Channel Bores, Nickel-Plated, HSK-A 63 Short, Clamping Dia: 10mm Integral tool length adjustment adjustment track 10 mm. 354210 354450, balancing screw set No.

    • Advantage: The double contact between the taper and the flat flange creates a more stable and precise clamping situation: Better surface quality Longer tool life times Consistent seating in the headstock even at high speeds Smaller radial run-outA BT double contact arbor can also be used in a standard BT machine spindle - and vice versa.
    • For high-performance milling of aluminum materials.

    For high-performance milling of aluminum materials.

    Solid Carbide HPC Drill, DLC Coated, 3. High alignment accuracy and roundness of the hole, thanks to 6 guide chamfers.

    • A slim chisel edge and the special arrangement of the 4 guide chamfers ensure high positioning and alignment accuracy.

    A slim chisel edge and the special arrangement of the 4 guide chamfers ensure high positioning and alignment accuracy.

    Master Steel SPEED Solid Carbide Coolant Through Drill, Plain Shank, TiAlN Coated, 5. Developed for use with very high cutting speeds. optimized micro-geometry for increased working life and performance capability.5 x DC.

    • of teeth Z: 5 Flute length Lc: 36 mm Overhang length L1 incl.

    of teeth Z: 5 Flute length Lc: 36 mm Overhang length L1 incl.

    Solid Carbide Roughing End Mill, TiAlN Coated, 18 mm D1: 17. Very high rate of metal removal.

    • With RFID/Balluffchip bore.

    With RFID/Balluffchip bore.

    Whistle Notch Arbor, HSK-A 63, Clamping Range: 18mm Application: For clamping tools with parallel shank and inclined clamping flat 2 Deg to DIN 1835 E and DIN 6535 HE.

    • Bit Socket Set, 1/4 inch Drive, 11 Pieces

    Bit Socket Set, 1/4 inch Drive, 11 Pieces

    Material:Chrome vanadium steel, chrome-plated.

    • Application: For clamping shell end Mills and Milling cutter heads.

    Application: For clamping shell end Mills and Milling cutter heads.

    309840: 16 309880, socket wrench for coolant tubes No. Supplied with: Lock screw. With Balluff/RFID chip bore.

    • PREVIOUS 15200 15201 15202 15203 15204 15205 15206 15207 15208 15209 15210 15211 15212 15213 15214 15215 15216 NEXT