HSS-E NC reamer, 3/32inch, Uncoated For highest concentricity and process reliability.

Concentricity: 8 um Overhang dimension A: 45 mm External Diameter D: 25 mm Optional extras: Pull studs PS No.

Application: For clamping tools with Weldon shank to DIN 1835 Form B and DIN 6535 Form HB. 318892.

All gage blocks are marked with an individual identification number. Tolerance class 1 for checking standards, gages and for setting length gages as well as for normal inspection work in the inspection room Size 0..

Version: Forged from high quality steel- internally beveled for easy fitting to bolt heads. 1/4 inch Drive Socket, 6 pt, 12 mm.9 mm Length: 25 mm Square drive socket with hole to DIN 3120 D 6.Standard: DIN 3124-S Material: Chrome vanadium steel- chrome-plated.

8 mm.5 x DC. High roundness and alignment accuracy of the deep hole- thanks to 4 guide chamfers. Standard: Manufacturer's standard Tolerance nominal dia : m6 Number of cutting edges Z: 2 Tolerance nominal dia : m6 recommended maximum drilling depth L2: 96 mm Overall length L: 162 mm Shank dia Ds: 12 mm Feed f in stainless steel > 900N/mm2: 0.

30 9900: 12 Machining strategy: HPC Overhang dimension A: 50 mm External Dia D: 44 mm Spare clamping screw No. Balancing quality G 6.All shanks fine bead blasted.

Reinforced version/contour. Integrated length adjustment of the tools.

Made from high quality tool steel, all functional faces hardened and reworked.Application: For drilling and milling with driven tools with ER collet connection..

Cutting chisel edge with high centring accuracy due to strong core and special point geometry..

Through hardened and ground. Concentricity: 10 um Supplied with: In a case with rigid foam inlay, 1 mm increments.

Optimum guidance and sliding characteristics due to double Vee guides mounted in plastic.

optimized grit bonding yields very aggressive abrasion and a high material removal rate. Special Aluminium Oxide A with upper layer bonding for general-purpose use in toolmaking and mould making. Aluminum Oxide Abrasive Cap, 80 Grit, Type: 1319G Application: The seamlessly formed abrasive caps slide on to the rubber body and are securely held in place by centrifugal force when the machine is running..

5 mm Center offset L3: 9 mm.

. maximum circumferential speed: 80 m/s Bore : 22.23 mm For universal use on stainless steel, steel and cast iron.

.Interchangeable Pilot Pin for Counterbore 156520 18-20, 11 mm Ds: 5 mm for screw size: M10 for hole: Through hole medium suitable for counterbore Dia.

. Efficient drilling especially for use in stainless and acid-resistant steels. Enlarged flutes for excellent chip evacuation.

. Recommendation: Maximum drilling depth: L2 = LC 1. Point geometry with rake angle correction.HSS-E-PM Jobber Drill, TiAlN Coated, 12 mm Shank to DIN 1835A.

005 No.91 mm Overall length L: 90 mm Shank Dia.

.HSS-E Stub Drill, TiAlN Coated, 5.

2 mm Tapping hole Dia. High-performance tap, specially developed for good process reliability in stainless and acid-resistant steels and duplex materials.

For critical applications e.g. highest possible production accuracy, minimal burr formation, reduced coolant pressure, reduce the feed rate of the tool by 50% before entering and exiting the material.

Double-relief ground with 2 chamfers hollow ground.

HSS Adjustable Hand Reamer, 21 mm Fine adjustment using ring gages or micrometers.

of teeth Z: 6 for T-slots DIN 650: 14 mm Recess Dia.D1: 12 mm Overall length L: 82 mm Shank Dia. With semi-roughing profile.

2 mm Outstandingly suitable for machines with low power output and high speeds. Developed for use with very high cutting speeds.Master Steel SPEED Solid Carbide Coolant Through Drill, Plain Shank, TiAlN Coated, 15.

This results in easy and chatter-free cutting for deep countersinking, as well as for deburring or countersinking.

Note: Use the speed for the actual hole Dia. Solid Carbide NC Spotting Drill, 90 Deg, TiAlN Coated, 6 mm Dia. is used afterwards. Application: Point angle 90 Deg for spot drilling and countersinking in one operation when a drill of smaller Dia.

3 mm Corner radius R1: 0. e. Solid Carbide Torus End Mill, Diamond Coated, 0. of teeth Z: 2 Helix angle: 25 degrees Shank: DIN 6535 HA to h5 No.

Cutting chisel edge with high centering accuracy due to strong core and special point geometry.2 mm Advantage: High process reliability and surface quality of the hole.5 x DC.