Range -15 Degrees to 400 Degrees F, FDA Approved FDA Approved 44 mm, Temp.

Range -40 Degrees to 250 Degrees F, FDA Approved FDA Approved 29 mm, Temp. Buna-N O-Ring, 2.

Range -40 Degrees to 250 Degrees F, FDA Approved FDA Approved 110 mm, Temp. Buna-N O-Ring, 5mm Wide 100mm ID, PK10.100 mm, Nominal Width 5 mm, Actual Inside Dia. 100 mm, Actual Width 5 mm, Dash Number Not Applicable, Color Black, Durometer 70A, Nominal Outside Dia.

Range -40 Degrees to 250 Degrees F 10 mm, Temp. O-Ring,Buna N,10mm OD,PK25.

O-Ring,Dash 211,Viton ETP,0.796 in, Actual Width 0.

Nipple, Application Air, Gas, Non-Potable Water, Oil, Steam, Finish/Coating Galvanized, Fitting Compatibility Schedule 40, Inside Diameter 2 1/16 in, Manufacture Location Made in USA*, Material Steel, Material Grade Grade A, Maximum Operating Pressure 150 psi @ 150 Degrees F, Metal Pipe Construction Welded, Nominal Pipe Size 2 in, Outside Diameter 2 3/8 in, Overall Length 6 1/2 in, Pipe Weld Type Continuous Weld, Schedule Schedule 40, Side A Connection Type Threaded, Side A Gender Male.

Y Strainer, Pipe Size 1/4 in, Maximum Pressure at 100 deg F 1,480 psi, Length 3 in, Height 4 1/4 in, Blow Off Port 1/4 in, Screen Material 304 Stainless Steel, Perforated Screen Size 0.062 in, Housing Material Carbon Steel, Class 600, Cv Flow Factor 5 gpm, For Use With Steam, Water, Includes Screen Yes, Maximum Pressure 1,015 psi @ 750 Degrees F, 1,480 psi @ -20 Degrees F to 100 Degrees F, Maximum Temperature 100 Degrees F, Port 1 Connection Size 1/4 in, Port 1 Connection Type Socket.

Concentric Reducer Coupling, Stainless Steel, 304L, For Pipe Schedule 10, 3 in, Butt Weld, 4 in, Butt Weld, 275 psi @ 150 Degrees F Maximum Operating Pressure.

Strut Pipe Clamp, Clamp Material Stainless Steel, Clamp Material Grade 304, For Maximum Outside Diameter 3 1/2 in, For Pipe Size 3 in, For Strut Channel Width 1 5/8 in, Load Capacity 800 lb.

.5 cu in, Material Steel, Number of 1/2 In.Electrical Box, 21.

Jobber Length Drill Bit, Drill Bit Size 7/64 in, Drill Bit Point Angle 135 Degrees , High Speed Steel, Black & Gold, Decimal Equivalent 0.1094, Fractional Inch, Drill Bit Point Type Split Point, Non-Coolant Through, Number of Coolant Holes 0.

Stacking Container, Container Wall Type Solid, Fork Pockets No, Includes Lid No, Material Fiberglass Reinforced Composite, Maximum Operating Temperature 250 Degrees F, Minimum Operating Temperature -60 Degrees F, Body Color Gray, Nestable No, Overall Height 6 in, Overall Length 25 3/4 in, Overall Width 17 3/4 in, Resistant To Alkaline Solutions, Cutting Oils, Detergents, Mild Acids, Stackable Yes, Stacking Capacity 3,500 lb, Volume Capacity 9.5 gal, Weight Capacity 400 lb, NSF Certified No.

002 in, 18 in Overall Width, Width Tolerance +/-0.

Please note that while this storage bin does not include divider slots or ESD conductive properties, it maintains its focus on offering reliable and sturdy storage solutions for small businesses across various industries.

.Kingpinless Swivel Caster,Ductile Iron,6 in,1400lb Swivel, Kingpinless Plate Caster, Load Rating 1400 lb, Swivel Lock Type No Lock Included, Wheel Dia.

Reducing Tee, Application Potable Water, Fitting Side A Connection Type Cup, Fitting Side B Connection Type Cup, Fitting Side C Connection Type Cup, Fitting Side A Copper Tube Size 2 in, Fitting Side B Copper Tube Size 1 1/4 in, Fitting Side C Copper Tube Size 2 in, Fitting Material Wrot Copper, Fitting Side A Tube Outer Diameter 2 1/8 in, Fitting Side B Tube Outer Diameter 1 3/8 in, Fitting Side C Tube Outer Diameter 2 1/8 in, Specific Fitting Shape Reducing Tee.

125 in, System of Measurement Inch, Drive Square, Point Type A, Package Quantity 50.4, SAE J933, For Maximum Material Thickness 1/32 in, Pack Size Small, Minimum Head Height 0.125 in, Drive Size 3R, Dimensional Standards ASME B18.Tapping Sheet Metal Screw, Head Type Flat, Finish Plain, Material 18-8 Stainless Steel, Screw Size #12, Fastener Length 2 1/2 in, Head Width 0.

-20, Thread Length 2 23/64 in, Shank Length 2 3/8 in, Eye Inside Dia.

Compressed Air Regulator, Air Inlet Size 3/8 in, Air Inlet Type NPT, Maximum Flow Rate 70 cfm, Maximum Operating Pressure 300 psi, Maximum Operating Temperature 150 Degrees F, Pressure Gauge Included No, Overall Width 2 in, Series Compact, Air Inlet Gender Female, Air Outlet Gender Female, Air Outlet Size 3/8 in, Air Outlet Type NPT, Body Material Zinc, Maximum Regulated Pressure 30 psi, Minimum Regulated Pressure Not Applicable.

9 in Hg, Ball Material Chrome-Plated Brass, Ball Port Style Standard Port, Handle - Locking Non-Locking.Manual Two-Way Ball Valve, Body Material Brass, For Media Air, Steam, Water, Valve Construction Two-Piece, Nominal Valve Size 1/4 in, Valve Body Style Straight, 3-A Standard Compliance Not Rated, Average Surface Roughness (Ra) Not Applicable, Maximum Pressure - Operating 1,000 psi, Maximum Pressure - Steam 150 psi, Maximum Pressure - Combustible Gas Not Rated, Vacuum Service Rating 29.

103 in, Washer Outside Diameter 0.

Nipple, Application Air, Natural Gas, Non-Potable Water, Oil, Steam, Finish/Coating Black, Fitting Compatibility Class 300, Gravity Flow No, Inside Diameter 15/16 in, Manufacture Location Globally Sourced, Material Steel, Material Grade Grade B, Maximum Operating Pressure 1379 psi @ 650 Degrees F, Maximum Operating Temperature 600 Degrees F, Maximum Steam Pressure 1379 psi @ 650 Degrees F, Metal Pipe Construction Welded, Minimum Operating Temperature -20 Degrees F, Nominal Pipe Size 1 in.

8/7.9 Amps, Number of Stages 20, Discharge Port 1 In.

Quick-Change Sanding Disc, Abrasive Type Coated, Abrasive Material Zirconia Alumina, Backing Material Polyester, Backing Weight Y, Coating Coverage Semi-Open, Grade Coarse, Grit 60, Overall Diameter 2 in, Quick Change System TS, Series BlueFire R860, Maximum Operating Speed 25,000 RPM, Color Blue, Package Quantity 25.

Crimp, Solder, and Heat-Seal Wire Connector Kit, For Conductor Material Aluminum, Copper, Insulation Material Polyolefin, Maximum Operating Temperature 230 Degrees F, Minimum Wire Size 24 AWG, Maximum Wire Size 10 AWG, Number of Pieces 120, Termination Style Crimp, Tools Included None, Manufacture Model Numbers Included 11546, 11547, 11548, 11850, 11851, 11852, 11853, 11854, 11855, 11856, 11857, 11858, 11859, 11860, 11861, 11862, 11866, 11867, 11868, 11869, RoHS Compliant Yes, Standards CSA, UL.

Insulated Tool Kit, Tool Storage Type Tool Case, Measurement Type SAE, Drive Size Sockets Not Included, Number of Pieces 14, Pliers Included (1) Diagonal-Cutting Pliers, Lineman's Pliers, (2) Long-Nose Pliers, Screwdrivers, Keys, and Bits Included (2) Phillips Screwdrivers, (3) Slotted Screwdrivers, (5) Nut Drivers, Sockets, Drive Tools, and Accessories Included None, Wrenches Included None, Striking and Struck Tools Included None, Cutting Tools Included None, Plumbing Tools Included None.

Working Pressure @ 70 F 150 psi, Temp.3" ID x 20 ft Rubber Discharge & Suction Hose BK 3 in, Hose Length 20 ft, Hose Color Black, Hose Tube Material EPDM, Hose Cover Material EPDM, Max..

Fuse, 6.25 A, 300V AC, Not Rated, GMF Series, Glass Fuse, Time Delay, Body Style Cylindrical, Nonrejection, Interrupt Rating 10kA at 300V AC, Fuse Size 2-1/4 in L x 5/8 in dia, Length 2 1/4 in, Diameter 5/8 in, Equivalent Brand and Series Bussmann GMF, Littelfuse LMF, Mersen SMF, Equivalent Series GMF, LMF, SMF, Body Material Glass, Compatible Fuse Block Series HLR, Cap Diameter 5/8 in, Single Element, Standards CE, CSA Certification Class 1422-01, UL 248-14 Guide JDYX.

125 in, Pack Size Small Pack, Thread Style Fully Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards ASME B18.75 in, Head Diameter 1.

Drawer Divider, Compatible Product Type Drawers, For Drawer Height 5 in, Product Type Drawer Divider, Material Steel, Overall Height 2 in, Overall Length 7 7/8 in, Overall Width 7 7/8 in, Includes Fasteners.