overall length: 145 mm Hole for tommybar : 6 mm Shaft external hexagon S: 14 mm Standard: hnlich DIN 896 A..Tubular Box Wrench, 14mm x 15mm Material: Chrome vanadium steel, chrome-plated.

Particularly strong due to strengthened core and special profile.

Supplied with: Arbor, clamping screw and intermediate ring. Slitting Saw Arbor, for Diameter: 100mm For side lock arbor with bore Dia d3 20 or 25 mm. A: 92 mm Length L: 150 mm Dia d2: 22 mm Dia d3: 25 mm Dia d4: 39. Concentricity 0.

ER11 Collet Set, 7 pieces 1-7mm Polished. Supplied with: In a case with rigid foam inlay, 1 mm increments.. Through hardened and ground.

Profile ground: High concentricity and pitch accuracy, drills for series production use. Standard core without core taper.HSS Jobber Drill, TiN Coated, 5.

. HSS-Co8 End Mills, TiAlN Coated, 8.

Supplied with: Including drive key, face mill drive ring, and milling cutter lock screw No. 309870: 40 309861.HSK mating faces machined. Note: Internal cooling available only with suitable tightening screw No.

01 mm. of teeth Z: 2 Flute length Lc: 1.

Nominal Dia. and shank Dia.

Indexable Turning Toolholder, DCLNL2525M16, for CN 5 Inserts, Left-Hand Functional width L4: 32 mm Head length L1: 36 mm Overall length L: 150 mm Shim: 259031 35 Clamp toolholder 25/16 mmStandard: Works standard ISO code toolholder: DCLNR/L 2525M16 suitable indexable insert: CN.

Cutting chisel edge with high centering accuracy due to strong core and special point geometry.

Internal square to DIN 3120.1 mm Length: 77 mm 642522. Note: GARANT and HOLEX bi-hex sockets, long, including are available also in imperial sizes from our eShop GARANT: No. Forged from high quality steel, internally bevelled for easy fitting to bolt heads.

Indexable Turning Toolholder, DCLNR4040S19, for CN 6 Inserts, Right-Hand Functional width L4: 50 mm Head length L1: 45 mm Overall length L: 250 mm Shim: 259031 18 Clamp toolholder 40/19 mmStandard: Works standard ISO code toolholder: DCLNR/L 4040S19 suitable indexable insert: CN...

due to short chamfer lead. Up to size 3.8 even number of teeth and uneven spacing.

Application: On pillar drills- lathes or hand-held power drills at the appropriate speed. - Vario toothing 4/6 tpi for low vibration.

2 mm Tapping hole Dia. GARANT Master Form Steel: The latest generation of high-performance fluteless taps are specially developed for use in steels. Multi-layer HIPIMS coating for high wear resistance.

Precision centered ground point with thin chisel edge gives easy spot drilling and high accuracy of the center hole form.. 6 mm with drive flat to DIN 1835-B.

Solid Carbide End Mill, SiTiN, 1. Strengthened core. of teeth Z: 3 Flute length Lc: 4 mm Overhang length L1 incl. f8 No.

..Indexable Turning Toolholder, PWLNL2020K08, for WN 4 Inserts, Left-Hand Functional width L4: 25 mm Head length L1: 20 mm Overall length L: 125 mm Shim: 259031 40 Lever lock toolholder 20/08 mmStandard: DIN ISO 5610 ISO code toolholder: PWLNR/L 2020K08 suitable indexable insert: WN.

HPC milling cutter with newly developed high-performance coating. Dimensions similar to DIN 6527.

1 mm/rev. Cutting speed vc main application: 150 1600 m/min Alternatively all suitable ISO tool holders and boring bars can be used. MCD Turning Insert, Diamond, CCGW120412FN Application: For very fine machining for the best finishing surfaces. Honing for long-chipping non-ferrous metals.

5 degrees suitable indexable insert: VB 1604 Minimum pre-drill Diametermin: 32 mm Center offset L3: 17 mm.Boring bar steel 25/16 mmStandard: DIN 8024 Shank Diameters: 25 mm ISO code toolholder: A25R SVQBR/L16 Setting angle k: 107.

.

5 mm 2 4xD on NC machines and automatic machines.HSS-Co8 Stub Drill, TiAlN Coated, 1.

4 mm/m. Sturdy housing of high quality special casting, Vee base with ground contact surfaces in the angle important for marking out, aligning, etc. All measuring faces are exactly parallel to the axis of the vial.

.Fixed for drills up to Diameter 50 mm with tip angle 118 Deg.

With RFID / Balluffchip bore. Machining strategy: HPC Cooling channel bore: not lockable Clamping Dia D1: 8 mm Overhang dimension A: 120 mm External Dia D: 31. Optional extras: Pull studs PS No. PS wrenches No.

Shanks hard turned smooth cutting action!.

Socket length L1: 105 mm Socket length L2: 26 mm Bore F: 5 mm Material: Chrome vanadium steel, chrome-plated. Sizes 6 and 7 hexagon on both sides, from size 8 with hexagon on long arm and bi-hexagon on short arm.. Drop-forged for the most arduous duties with especially close-tolerance jaw widths.

Advantage: For drilling with drill bushes or long reach applications. 112120, 112140 and 112170 with 142 Deg tip angle for enhanced process reliability.. Note: Suitable NC spotting drills No.