Through-coolant: No Standard: DIN 338 Tolerance Nominal Dia.

Through-coolant: no Standard: DIN 338 Tolerance nominal Dia.

HSS-E jobber drill, TiAlN, Dia. Ds: 3. Recommendation: Maximum drilling depth: L2 = LC 1.

Through-coolant: no Standard: DIN 338 Tolerance nominal Dia.

09 mm/rev.8 mm Feed f in stainless steel > 900 N/mm2: 0.5 x DC. Ds: 8.

Designed for deep holes up to 10xD and materials with critical chip formation characteristics.

5 x DC.

Economy version with standard flutes.

343000-343530. High concentricity.Core thickness and core taper are standard.5 x DC.

of teeth Z: 2 Flute length Lc: 11 mm Corner radius R1: 0.3 mm Overhang length L1 incl.

Solid Carbide Torus End Mill, for Aluminum, Uncoated, 10/0.

Application: On stable, low vibration machines.

5 mm This ensures that the reamed bore is absolutely round and free from chatter marks.

of teeth Z: 2 Flute length Lc: 16 mm Overhang length L1 incl.

. Tolerance nominal Dia.Diabolo Solid Carbide End Mill for Hard Steels, TiAlN Coated, 6 mm D1: 5. e8 No.

With point geometry shape C from size 2.4 mm Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

HSS Jobber Drill, TiN Coated, 15 mm Precision ground point. Standard core without core taper.. Profile ground: High concentricity and pitch accuracy, drills for series production use.

148350, 148200, 148410 and extensions No.149400.

HSS Hand Reamer, 16 mm Application: For through holes not for blind holes. Note: Hand reamers finish ground to match your specifications can be ordered as No.

Values for: slots milled from solid: ap = 0.1xDxap korr side milling: ap = 0.2xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed!

44 mm Overall length L: 45 mm Shank Dia. Ds: 4 mm D1: 1. of teeth Z: 2 Flute length Lc: 2.

In the case of steels >45 HRC: can only be used with compressed air!

Diabolo Solid Carbide End Cutting Thread Mill, M8-1.

D1 +0.05: 3.9 mm Overall length L: 75 mm Shape: Pointed Shank Dia.

Pointed version Application: For forward and reverse deburring and chamfering even where access is difficult. 208180.

equal.

and shank Dia.

recess: 2 mm Recess Dia.

e.

HSS-E-PM tool material for maximum wear resistance.

. Reduced coefficient of friction due to the new high-performance coating. Application: For Whitworth parallel pipe threads DIN-ISO 228/1 threads that do not form a seal within the connection.

of teeth Z: 3 Flute length Lc: 13 mm Overhang length L1 incl.

Solid Carbide Roughing End Mill for Aluminum, Coolant Through, Uncoated, 6 mm D1: 5.

HSS-E-PM tool material for maximum wear resistance.

.

see table less than the stated size.

343000-343530. Recommendation: Maximum drilling depth: L2 = LC 1.HSS Core Drill, Uncoated, 10.5 x DC.

Economy version.

Center cutting edge geometry for plunging.HSS-Co8 End Mill, TiAlN Coated, 8 mm Application: For milling keyways slots or pockets from the Center of the component.

Ds: 20 mm

D3: 10 mm large Dia. Application: For rounding and deburring edges. Solid Carbide Corner Rounding Cutter, TiSiN Coated, 5 mm No. of teeth Z: 4 small Dia.