Split Lock Washers are non-continuous rings that tilt each end slightly outside in opposite directions and are designed to prevent a fastener from loosening due to vibration or torque..
.Split Lock Washers are non-continuous rings that tilt each end slightly outside in opposite directions and are designed to prevent a fastener from loosening due to vibration or torque.
Phillips Flat Head machine screws have a flat top with a conical bearing surface andare commonly used in countersunk holes where the screw head must sit flush with the surface of the material..
.These screws have an integral washer at the bottom of the headand a point that can cut new threads in a pre-drilled hole -primarily used with metal, plastic, wood and other common materials.
.200 Pieces 3/8in-16 Grade A Nylon Insert Hex Nuts Zinc, 200PK Nylon Insert Lock Nuts are a type of lock nut that has a nylon collar insert - which increases friction on the screw thread.
These bolts have greater tensile strength than Grade 2 hex bolts, and its yield to tensile ratio is the lowest of all heat-treated steels.Grade 5 Tap Bolts can be distinguished by the 3 dashes l on top of the head of the bolt.
Grade 5 Tap Bolts can be distinguished by the 3 dashes l on top of the head of the bolt.These bolts have greater tensile strength than Grade 2 hex bolts, and its yield to tensile ratio is the lowest of all heat-treated steels.
.20 Pieces 1/2in-13x1-3/4in Square Head Bolts Grade A307 Hot Dip Galvanized, 20PK Square Head Bolts have square-shaped external wrenching heads, which offer a large bearing area for positive gripping.
300 Pieces 1/2-13x1-1/2in Hex Head Cap Screws Grade 8 USA Zinc Yellow, 300PK Grade 8 Hex Cap Screws have 6 radial lines on the head, and can withstand a minimum of 150,000 PSI tensile strength. Hex Cap Screws feature a washer face under the head, which creates a better seal when applying load. Made in the USA!.
.Socket Cap Screws are known for their high tensile strength and durability, and are commonly used in applications such as machinery, automobiles, and heavy equipment.
.Phillips Flat Head machine screws have a flat top with a conical bearing surface andare commonly used in countersunk holes where the screw head must sit flush with the surface of the material.
2500 Pieces #10-32x3/4in 18-8 Stainless Steel Flat Head Socket Cap Screws, 2500PK Flat Socket Cap Screws are countersunk and expose none of their head above the mating surface..
.200 Pieces #10-24x1/2in 18-8 Stainless Steel Flat Head Socket Cap Screws, 200PK Flat Socket Cap Screws are countersunk and expose none of their head above the mating surface.
.20 Pieces M12-1.9 Alloy Flat Socket Head Cap Screws Zinc, 20PK Flat Socket Cap Screws are countersunk and expose none of their head above the mating surface.75x35 Class 12.
10 Pieces 5/8-11x2-1/2in Alloy Cup Point Allen Socket Set Screw Black Oxide, 10PK Cup Point Set Screws feature a hex drive at one end and a cup-shaped indentation at the other..
5 Class 8 Finished Hex Nuts Zinc, 10PK This is achieved through a combination of compression and friction between the threads of the bolt and the threads of the nut..10 Pieces M12-1.
.8 Pieces 3/8-16x2-1/2in Round Head Square Neck Elevator Bolts Zinc, 8PK Elevator bolts are threaded fasteners consisting of a threaded shank and a thin round head.
A2-70 Stainless Steel Hex Cap Screws are hex head cap screws that have a minimum tensile strength of 700Mpa..They are often used in construction, machinery, oil and gas and many other industrial applications.
.100 Pieces #8x2-1/2in Phillips Pan Head Type AB Self Tapping Sheet Metal Screws Zinc, 100PK Self tapping screws only tap their own thread, so in most cases will require a pilot hole to get started.
Made in the USA!.75 Pieces 3/8in SAE Grade 8 Flat Washers Zinc Yellow USA Made, 75PK Flat Washers are flat and smooth and serve to incorporate spacing and distribute load when placed between a nut and bolt or screw.
.25 Pieces 1in-8 Grade 2H Heavy Hex Nuts Plain & Oil, 25PK Structural Heavy Hex Nuts are a type of fastener, also known as structural nuts, have a high tensile strength and shear resistance - making them perfect for joining two pieces of metal together securely.
