1/2 SAE 100-R1 SN 1-WIRE MSHA HYDRAULIC HOSE 1FT

1/2" SAE 100-R1 SN 1-WIRE MSHA HYDRAULIC HOSE 1FT.

3 7/16 TDT7 ED BUSH ASSY TWIN-TAPERED BUSHING STD

DODGE 272135 3 7/16 TDT7 ED BUSH ASSY TWIN-TAPERED BUSHING STD.

The arched top of the Hi-Power belt provides superior strength to prevent ''dishing'' and distortion of the tensile section.

The wrapped classical section Hi-Power V-belt has a long reputation for reliability on agricultural and industrial applications.

Lip Seal, 17MM Shaft Dia, 30MM Housing Bore, 7MM Nominal Width

Lip Seal; 17MM Shaft Dia; 30MM Housing Bore; 7MM Nominal Width; Nitrile Lip; Solid Seal; 7MM Actual Width; Spring Loaded; 2 Sealing Lips; Carbon Steel Garter Lip Retainer; Steel and Rubber Case Construction; TC Seal Design Code.

Bore; 2.54 in.

Length Thru Bore; L100 Size or Series; Set Screw; Sintered Iron; 7000 Maximum Speed; NBR 417, Hytrel/Bronze 1134, Urethane 626In-Lbs Torque Hub Dia; Jaw Coupling; Hub; Shaft; Finished Bore; Keyway; 2..375 in.

Outside diameter; Jaw Coupling; Spider; Nitrile Butadiene Rubber; 0.42 in.

1.07 in. Outside diameter, Jaw Coupling, Spider, Nitrile Butadiene Rubber Thickness; L050, AL050 Size or Series; 18000 Max Speed; 26.

Outside Diameter; Bushed; H Bushing Series; 3L, 4L, A Belt Series; 3.36 in.

Transmission Pulley, 1 Grooves, 3.95 in.

Tapered Grid; 1090T10, 1090T20 Size or Series; Grid Coupling Type

FALK 1090T GRID Tapered Grid; 1090T10, 1090T20 Size or Series; Grid Coupling.

V-Belt, AX-X13X Series, Cogged Belt Style, 44 in.-1110MM Belt Outside Length

V-Belt; AX-X13X Series; Cogged Belt Style; 44 in.-13MM Belt Width; 1 Band; Polyester Tensile Material; Rubber Outer Material.-1110MM Belt Outside Length; 1/2 in.

Bore; 1-1/4 in.

. Bore; 1-1/4 in.Flange Block Bearing; 3 Bolt Flange Bracket; 1-3/16 in.

V-Belt, B-17X Series, 361 in.-9213MM Belt Outside Length, 5/8 in.-17MM Belt Width

-9213MM Belt Outside Length; 5/8 in.-17MM Belt Width; 1 Band; Polyester Tensile Material; Fabric Outer Material.V-Belt; B-17X Series; 361 in.

Width; One Set Screw; 1/2-13 X 1/2 Set Screw Size; One Piece Solid

Outside Diameter; 7/8 in. 1-3/4 in. Outside Diameter Bore; Shaft Collar; Steel; 2-5/8 in. Bore, Shaft Collar, Steel, 2-5/8 in.

L Bracket, Single Slot Long Angle L Bracket - Metal

25 IN Thickness, 0.

Shaft Dia; 8-7/8 in.

Lip Seal; 7-3/8 in.Lip Seal, 7-3/8 in. Shaft Dia, 8-7/8 in.

Width; 7 Size or Series; 5250 Max Speed; 725In-Lbs Torque

Between Shaft Ends; 2-3/16 in.

Adapter Assembly; For Reducer Part Number SCXT405A, SCXT4A, HSCXT405A, HSCXT4; TORQUE ARM; C4 Size

DODGE INDUSTRIAL C4 ADAPTER ASSY Adapter Assembly; For Reducer Part Number.

V-Belt; 8V Series; V-Belt Banded Style; 4 Bands

V-belt; 8V Series; Banded; 265" Outside Length; 4" Width; 4 Bands; Polyester Tensile Material.

Synchronous Belt, 14MM Pitch, 2660MM Pitch Length, 52.5MM Belt Width

Synchronous Belt; 14MM Pitch; 2660MM Pitch Length; 52.

Nominal Outside Diameter; 0.82 in.

Nominal Outside Diameter Flange Outside Diameter; 0.Sleeve Bearing, 1. Sleeve Bearing; 1.

Pitch Length; 3/8 in.

Pitch Length Belt Width; 4 Bands; Polyester Tensile Material J Series; Poly-V Style; 3/32 Inch Pitch; 24 in.J Series, Poly-V Style, 3/32 Inch Pitch, 24 in.

V-Belt, A-13X Series, 118 in.-2996MM Belt Outside Length, 1/2 in.-13MM Belt Width

V-Belt; A-13X Series; 118 in.-13MM Belt Width; 1 Band; Polyester Tensile Material; Fabric Outer Material.-2996MM Belt Outside Length; 1/2 in.

Do NOT machine dry.

Employing cleaning methods other than those outlined above may shrink the vest, ruin the reflective tape or dim the coloring below safe standards. Standard Polyester Mesh Safety Vest w/ Zipper & Radio Clips (Lime/4X-Large).

Santoro Small LED Bathbar

EUROFASE 39316-035 Santoro Small LED Bathbar.

viscosity: 250 cPs, Temp range: 32 degrees F - 140 degrees F, 120VAC,60Hz,1ph, 230W motor capacity, 2.4 FLA, IP24 rated, polyamide enclosure, 16 ft power cable with plug, 3/4 inch braided PVC hose.

Quality Products - Made in Germany.

Every Machine-Ready Blank is deburred, cleaned, individually packaged for shipping, and arrives ready to load directly into your CNC machining center.

063-0in.375in X 1.

Every Machine-Ready Blank is deburred, cleaned, individually packaged for shipping, and arrives ready to load directly into your CNC machining center.

063-0in.000in X 12.