077 in, Fits Minimum Hole Diameter 3/8 in, Fits Maximum Hole Diameter 3/8 in, Shank Length 2 in, Maximum Chamfer Length 0.Spring Pin,Sltd,3/8inx2in,16300lb,PK10 L,Slotted,PK10, System of Measurement Inch, Pin Diameter 3/8 in, Pin Type Slotted, Material Stainless Steel, Material Grade/Class 420, Finish Plain, Usable Length 2 in, End Type Chamfered, Chamfer Diameter 0.016 in, Nominal Diameter 3/8 in, Standards ASME B18.8.

7 1/4 in, Nominal Width 3/16 in, Actual Inside Dia. 7.

Fully Threaded Rod, Material Grade/Class Grade B7, Material Steel, Finish Black Oxide, Thread Size 2 1/2 In.

25, Overall Length 40 mm, Drive Type Socket, Drive Size 4 mm, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, Pack Size Small Pack, Dimensional Standards DIN 915, Head Height Not Applicable, Maximum Head Height Not Applicable, Maximum Temperature 302 Degrees F, Minimum Head Height Not Applicable, Minimum Temperature -58 Degrees F, Package Quantity 50.Socket Set Screw, Head Type Headless, Point Type Dog, System of Measurement Metric, Thread Size M8x1.

005 in, Shoulder Diameter 5/16 in, Shoulder Diameter Tolerance -0.004 in, Pack Size Small Pack, Head Height 7/32 in, Head Diameter 7/16 in, Dimensional Standards ASME B18.002 in to -0.

Socket Set Screw, Head Type Headless, Point Type Flat, System of Measurement Inch, Thread Size 3/8 In.

103 in, Drive Size #2, Threads per Inch 18, Pack Size Small, Maximum Head Width 0.091 in, System of Measurement Inch, Head Type Round, Dimensional Standards ASME B18.Wood Screw, Finish Zinc Plated, Material Steel, Drive Phillips, Screw Size #6, Fastener Length 1 in, Head Width 0.

Machine Screw, Head Type Pan, Material 18-8 Stainless Steel, Finish Plain, Drive Slotted, Thread Size #10-24, Fastener Length 3 in, Head Width 0.6.362 in, Minimum Head Width 0.

Solenoid Valve, Valve Ways 3-Way, Valve Starting Configuration Normally Closed, Valve Type Not Applicable, Nominal Pipe Size 1/4 in, Orifice Diameter 1/4 in, Body Material Brass, Coefficient of Volume (Cv) Not Applicable, Operating Pressure Differential Air/Inert Gas - Maximum Not Applicable, Operating Pressure Differential Fuel Gas - Maximum Not Applicable, Seal Material NBR, Voltage 120V, Operating Pressure Differential Fuel Oil - Maximum Not Applicable, Coil Enclosure Not Applicable.

Mineral Oil.

Wax Motor, For Use With Washer.

Door Sag Service Kit.

Thermal Fuse, Compatible with Manufacturer Model Number BDE7500, DE26CA, DE26CD, DE26CS, DE26CT, DE27CA, DE27CS, DE27CT, DE4000, DE4910, DE5910, DE7400, DE7500, DE7600, DE7800, DE8000, DE8200, DE8300, DE8410, DE8420, DE8500, DE8600, DE9700, DE9800, DE9900, GDE26CA, GDE26CD, GDE26CS, GDE26CT, GDE27CA, GDE27CS, For Use With Dryer.

.1, Head Type Standard, Min./Thread Size 3/8 In.

Jumbo Washer, Flat Washer Type Oversized, Dimensional Standards AMPG 2001 FL.625 in, Outside Diameter 3 in, Maximum Thickness 0.05, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, For Screw Size 1 1/2 in, Inside Diameter 1.010 in, Pack Size Small Pack.

Shaft Shim, Package Quantity 25.

Shoulder Screw,Monel,5/8-11",1-3/4 L.

Shoulder Screw,Titanium,3/4-10",1 L.

031 in, Outside Diameter 2 in, Maximum Thickness 0.Beveled Washer, Flat Washer Type Beveled, Material Steel, Material Grade/Class Case Hardened, Finish Black Oxide, For Screw Size 1 in, Inside Diameter 1.312 in, System of Measurement Inch, Minimum Thickness 0.

Shoulder Screw,18-8 SS,2-56",1/2 L.

Shoulder Screw,Monel,5/16-18",1/2 L.

Square Washer.

Shoulder Screw,Monel,1-1/8-7",1-1/4 L.

ASME Skt Shdr Screw Alloy USA,1-3/4,1-.

-16, Minimum Thread Length 1 3/4 in, Fastener Length 1 3/4 in, Head Height 0.3, Flange Diameter Not Applicable.625 in, Pack Size Small Pack, Thread Style Partially Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards ASME B18.562 in, Head Diameter 0.

Shoulder Screw,Aluminum,1/4-20",6 L.

Shoulder Screw,316 SS,10-32",1-7/8 L.

Square Washer.

-14, Thread Direction Right Hand, Thread Type Fine, Flange Diameter Not Applicable, Flange Thickness Not Applicable, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, Body Texture Knurled, Compatible Material Metal, Plastic, Drill Bit Size 1 13/32 in, Maximum Hole Diameter 1.

Stainless 316, 15 mm Dia.