Solid Carbide Drill, Extra Short, TiAlN Coated, 1.1 mm. TiAlN coating for even better performance. Similar to DIN 6539 extra short.

..Steel Boring Bar, A25R PTFNR/L 16, for TN 3 Inserts, Right-Hand Minimum pre-drill Diametermin: 32 mm Center offset L3: 17 mm Boring bar, steel 25/16 mmStandard: DIN 8024 Shank Diameters: 25 mm ISO code toolholder: A25R PTFNR/L 16 Setting angle k: 90 degrees suitable indexable insert: TN.

Precision ground point. Note: Three drive flats on the shank for use in a 3-jaw chuck.

Straight major cutting edges and a special flute profile ensure good chip evacuation.

5 mm Generous flute profile. HSS-E-PM HPC Stub Drill, TiAlN Coated, 10.

Specially treated surface, reducing edge build up and improving chip evacuation.

1 0.ZCMX 130404 HBZ120 Grade: HBZ120 Cutting depth ap: 0.

20 mm Height: 7 mm 5.1 3/4 turns lead chamfer.

Shape: B h1: 25 mm b1: 85 mm b2: 42. Master Eco VDI Toolholder, Form B4 Radial, Left-Hand, Short, Shank Diameter: 40mm.5 mm h6: 48 mm l1: 22 mm Standard: ISO 10889 / DIN 69880 / VDI 3425, Blatt 2.

57 mm Feed f in steel < 750N/mm2: 0.03 mm/rev. Profile ground: Jobber drill with high pitch accuracy and concentricity as well as precision ground point.

Hand tap, single Taper tap.

10 mm for a desired slot width of 18 mm. Slot Cutting Insert for Keyway Broaching Toolholder, P9, with Chamfer, 18 mm Note: Special sizes slot widths available on request.

Note: Coolant transfer via slot on the underside of the shank in conjunction with GARANT Master Eco holders No. Highly efficient cooling directly on the cutter and additional flank face cooling.

.5 Tap Thread Size, TiCN Coated optimized honed cutting edges. High-performance tap, specially developed for use in steels with high tensile strength and for difficult-to-machine materials.

343000-343530. With point geometry shape C.

Tolerance nominal Dia. h10 No.7 mm Overall length L: 83 mm Shank Dia.

Screw-on toolholder 10/07 mmStandard: Works standard ISO code toolholder: SDACR/L 1010M07 suitable indexable insert: DC 0702 Functional width L4: 10 mm Head length L1: 15 mm Overall length L: 150 mm Pack of insert screws: 269021 1.

74 mm Overall length L: 55 mm of teeth Z: 2 Helix angle: 30 degrees Shank: DIN 6535 HA to h5 No. Note: At greater tool overhang lengths, use a reduced value for ap! Values for: slots milled from solid: ap = 0.50xDxap korr copying: ap = 0.

Application: The intermediate sizes are especially for milling keyway slots.. Carbide End Mill, TiAlN Coated, 2 mm of teeth Z: 2 Flute length Lc: 5 mm Overall length L: 50 mm Shank Dia.

.59 in Outside Length, 21/32" Top Width, 3 Ribs Belt, B, 21/32 x 59 in.

.85 in Outside Length, 21/32" Top Width, 12 Ribs Belt, BX Cogged, 21/32 x 85 in.

.140 in Outside Length, 7/8" Top Width, 8 Ribs Belt, C, 7/8 x 140 in.

CREATIVE PRODUCTS BH-DH110-WHT Baggage Door Holdback, 2-7/16in Long, 110 Degree.

B&B MOLDERS BBT-94202 Exterior Shower Head Bracket, Post Style, Black.

GLOBAL KC-SNM-NK-363 Replacement Lock Cylinder, For Non-Master Key.

GLOBAL KC-SM-NK-316 Replacement Lock Cylinder, For Master Key Applications, For.

CREATIVE PRODUCTS SP-83FQ23DTP-500 500 Pack - 8 x 3in Flat Quad 2/3 Deep Thread.

HP Regulator, CGA-320, Inlet 0 to 250 PSI, Needle Valve, Relief Valve, Use with: Carbon Dioxide GENTEC HP152T Series is a Dual-Stage High Purity Brass Regulator designed for High Purity applications where a consistent outlet pressure and flow are desired.

cc/sec He Max CV 0.3 lbApplications: Research Laboratories Process Analyzer Petrochemical Industry Gas Chromatography Power Plants Cylinders.cc/sec He Outboard Leakage 2 x 10-8 atm.

. Is your business or work space 100% covered and up to code with current signage and labels? Make Sure You And Your Business are OSHA And ANSI Compliant.