Fully Threaded Rod, Material Grade/Class 316, Material Stainless Steel, Finish Plain, Thread Size 2 In.-4 1/2, Overall Length 3 ft, Tensile Strength 70,000 psi, System of Measurement Inch, Thread Direction Right Hand, Includes Nuts No, Nut Width Not Applicable, Minimum Yield Strength 30,000 psi, Number of Nuts Included 0, Resistance Properties Corrosion Resistant, Rockwell Hardness Not Rated.

5 min, Mounting Desktop/Tower, Outlet Type (6) Surge, (6) UPS/Surge, Number of Outlets 12, Medical Grade Not Medical Grade Approved, NEMA Receptacle Configuration 5-15R, NEMA Plug Configuration 5-15P, Automatic Volts Regulation No, Fax/Modem Line Protection Yes, Transfer Time 3 msec from Battery to AC, 6 msec from AC to Battery, Width 12 in.5 min/2.

Union Tee, Application Air, Carbon Dioxide, Inert Gases, Potable Water, Color Gray, Fitting Side A Connection Type Push-to-Connect, Fitting Side B Connection Type Push-to-Connect, Fitting Side C Connection Type Push-to-Connect, Includes Pre-Applied Thread Sealant No, Fitting Side A Tube Outer Diameter 1/4 in, Fitting Side B Tube Outer Diameter 1/4 in, Fitting Side C Tube Outer Diameter 1/4 in, Fitting Material Acetal, Maximum Operating Pressure 145 psi @ 68 Degrees F.

75 in, Standards ASME, ASTM, CE Certified, Weight 37 lb.75 in, Overall Height 6.Electric Vibrator, Duty Cycle Continuous Only at Certain Force Settings, Intermittent Duty at Maximum Force Settings, Maximum Force 400 lbf, Voltage Type AC, Phase Three, Motor Enclosure Totally Enclosed Nonventilated, Sound Level 62 dBA, Power Source Electric Motor, Operating Voltage 575V AC, Maximum Bin Weight Capacity 1,500 lb, Full Load Current 1/3 A, Overall Length 11.5 in, Overall Width 5.

Locking Pliers Set, Plier Types Locking Pliers, Jaw Shape Curved, Handle Style Plain Grip, Jaw Opening Type Guarded Trigger Release, Jaw Bend 0 Degrees , Overall Length 5 in, 6 in, 7 in, 10 in, Maximum Jaw Opening 1 1/8 in, 1 1/2 in, 1 7/8 in, 2 in, Jaw Length 3/4 in, 1 in, 1 1/4 in, 1 1/2 in, 1 3/4 in, Additional Tool Functions Cable Cutter, Tether Ready No, Number of Pliers 5, Container Type Pouch, Features Classic Trigger Release Designed to Provide Maximum Locking Force, Hardened Teeth.

Pull Handle, Mounting Type Unthreaded Holes, Material Brass, Finish Brass Plated, Mounting Hole Center to Center 3 1/2 in, Projection 1 in, Screw Size #6 x 3/4 In., Overall Length 4 in, Grip Length 4 5/8 in, Color Brass, Degree Offset Not Applicable, Standards Not Applicable.

5 gpm, Maximum Feet of Head 7.Machine Tool Pump, Nameplate Voltage 230V AC, Phase Three, Pump Housing Material Brass, Bronze, Horsepower 1/25 hp, Maximum Viscosity 500 SUS, Flow Rate (Maximum, Water) 7.1 gpm, Flow Rate @ 5 ft of Head (Maximum, Water) 5.8 ft, Immersion Depth (Maximum) 6 in, Compatible Intake Pipe Size 3/8 in, Compatible Discharge Pipe Size 3/8 in, Intake Type NPT, Discharge Type NPT, Cord Length 3 ft, Impeller Material Bronze, Base Diameter 3.

.

. Heat Shrink Tubing, Thin Wall, Material Modified Polyvinylidene Fluoride, Rigid, Flame Retardant Yes, Adhesive Lined No, Shrink Ratio 2:1, Use With Wire Size 6 AWG to 1 AWG, I.

Solid Router Bit, Primary Material Application Aluminum, Spiral O-Flute Upcut, Fractional Inch, 1/8 in Cutter Dia..

Drive Pin Punch Set, Set Type Punch Set, Types Included Drive Pin Punch, Number of Pieces 8, Blade Width 1/16 in, 3/32 in, 1/8 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 5/16 in, Includes Handle No, Handle Material Steel, Includes Handguard No, Material Applications Metal, Steel, Overall Length 4 in, Includes 1/16 to 5/16 in, Tip Size 1/16 in, 5/16 in, Material Steel, Measurement Type SAE, Container Type Pouch, Tether Ready No.

,55 scfm Vacuum Conveyor Kit, Steel, For Hose I.5 In.Air Conveyor,Steel Alloy,1.

Threading Tool, Thread Profile Type Partial, Included Angle 55 Degrees , Carbide, TiN, 1.80mm, Coolant Through, Threading.

Vibration-Dampening Strut Clamp, Clamp Bore Style Smooth, Clamp Material Steel, Clamp Material Finish Galvanized, Clamp Type Strut Clamp, Compatible Mfr Part Number Wesanco Strut, Cushion Material TPE, For Copper Tube Size 2 1/2 in, For Insulation Thickness Not Applicable, For Maximum Outside Diameter 2 5/8 in, For Number of Lines 1, For Pipe Size Not Applicable, For Strut Channel Width 1 5/8 in, Included Insulation Thickness Not Applicable, Installed Height 5 29/64 in, Load Capacity 2,200 lb.

Torx Key, Tip Size T10, Long Arm Length 53/64 in, Short Arm Length 3 1/8 in, Black Oxide, Length Family Long, Torx, Number of Tips 2, Non-Sparking No, Non-Magnetic Yes, Tether Ready No, Corrosion Resistant Yes, Insulated No, Torx.

365 in, Minimum Head Height 0.365 in, System of Measurement Inch, Head Material Nylon, Head Shape Round, Package Quantity 10.-20, Fastener Length 1 1/8 in, Thread Style Fully Threaded, Thread Length 1 1/4 in, Head Width 0.54 in, Head Height 0.

Fluoropolymer Tubing, 3/16 In ID x 1/4 In OD x 100 Feet.

Mechanical Flowmeter, Product Type Flow Meter, Flowmeter Type Variable Area, Accuracy +/-5 Percent, Connection Size 1/2 in, Connection Type NPTF, Compatible Flow Material Water, Media Temperature - Maximum 250 Degrees F, Media Temperature - Minimum 32 Degrees F, Viscosity - Maximum 500 SUS, Voltage - Maximum Not Applicable, Housing Material PPSU, Rotor Material Not Applicable, O-Ring Material Buna-N, Seal Material Buna-N, Shaft Material Not Applicable, Wetted Material PSU.

Grease, Product Type Grease, Series Multi-Vehicle Moly-Fortified, Container Type Cartridge, Container Size 14.1 oz, For Use On Chassis, Disc Brakes, Linkage, U-Joints, Wheel Bearings, ISO Viscosity Grade Not Applicable, NLGI Viscosity Grade 2, Thickener Type Lithium, Viscosity @ 100 Deg F 12 cSt, Standards Ford M1C75B, Color Black, Gray, Dropping Point 400 Degrees F, Flash Point Not Specified, Specific Gravity -, Timken OK Load Not Specified.

Pipe Insulation, Insulation Material Melamine, Installation Style Slit with Adhesive, Inside Diameter 7/8 in, Wall Thickness 1 in, Overall Length 4 ft, Minimum Operating Temperature -40 Degrees F, Maximum Operating Temperature 350 Degrees F, Facing Material PVC Jacket, Color White, R Value 6.57, Form Tube, For Pipe Size 1/2 in, Flame Spread Index 25, Smoke Developed Index 50, Foam Cell Type Open, Plenum Rating Plenum Rated, Flexibility Flexible, For Tube Outside Diameter 7/8 in.

Steam Trap, Application Dry Cleaning Plants, Laundry, Steam Mains, Body Material Cast Iron, Body Material Tensile Strength 30,000 psi, Condensate Capacity 1,440 lb/hr, Configuration In-line, Distance Between Inlet and Outlet Port 6 15/16 in, Float Material Stainless Steel, Includes Air Vent Air Vent Not Included, Includes Strainer Strainer Included, Installation Orientation Horizontal, Lever Assembly Material Stainless Steel, Manufacturer Series B1.

Leveling Mount,Boltless,3/4-10,3 in Base Female-End Leveling Mount, Leveling Mount Type Swivel Boltless, Base Dia..

, Steel Pin Material, Nonremovable Pin Type, 5 in Overall Width.Piano Hinge, Ligature Resistant No, Steel Material, 270 Degrees Range of Motion, Steel Finish, Without Holes, Non Handed Orientation, 1 in Overall Knuckle Height, 48 in Door Leaf Height, 48 in Frame Leaf Height, 2 1/2 in Door Leaf Width, 2 1/2 in Frame Leaf Width, 0.

Bolt,Foot,6 In L Door Bolt, Operation Type Foot Pull, Zinc Finish, Material Zinc, Length 6 in, Width 2 1/4 in, Height 1 in, Bolt Length 6 in, Bolt Head Dia.

Flat Cover, Handle Material Aluminum, Handle Color Black, Oven Safe No, Product Type Flat Cover, Body Color Silver, Body Material Aluminum, Bottom Diameter 14 7/8 in, Bottom Material Aluminum, Dishwasher Safe No, Finish/Coating Natural, Gauge 14 ga, Handle Type Welded, Non-Stick No, Overall Height 1/2 in, Handle Coating Antimicrobial, NSF Certified Yes, Top Diameter 14 7/8 in.

Fuse, 7 A, 250V AC, 160V DC, Class RK5, TR-R Series, Nonindicating, Time Delay, Body Style Cylindrical, Fits Fuse Block Style Rejection, Interrupt Rating 200kA at 250V AC, 20kA at 160V DC, Fuse Size 2 in L x 9/16 in dia, Length 2 in, Diameter 9/16 in, Equivalent Brand and Series Bussmann FRN-R, Edison ECNR, Littelfuse FLNR, Mersen TR-R, Equivalent Series ECNR, FLNR, FRN-R, TR-R, Compatible Fuse Block Series 2HKRFB, Body Material Polyester, Dual Element, Standards CSA, UL.

Nipple, Application Air, Natural Gas, Non-Potable Water, Propane, Steam, Fitting Compatibility Schedule 80, Gravity Flow No, Inside Diameter 9/16 in, Material Stainless Steel, Material Grade 304, Maximum Operating Pressure 250 psi, Maximum Operating Temperature 450 Degrees F, Metal Pipe Construction Seamless, Minimum Operating Temperature -60 Degrees F, Nominal Pipe Size 1/2 in, Outside Diameter 13/16 in, Overall Length 1 1/8 in, Schedule Schedule 80, Side A Connection Type Close Thread.

Socket Weld Flange, Raised Face, 4 in Nominal Pipe Size, Flanged x Socket Weld, 9 in Flange Outside Diameter, 7/8 in Flange Thickness, Steel, Anodized, Class Class 150, For Pipe Schedule 40, 150 psi Maximum Operating Pressure, -29 Degrees to 425 Degrees F, Number of Bolt Holes 8, 3/4 in Bolt Circle Diameter, 5/8 in Bolt Hole Diameter.

IEC Magnetic Contactor, Auxiliary Contact Form 1NC, NEMA Enclosure Rating No Enclosure, NEMA Size Not Applicable, Coil Voltage 208V AC, Number of Poles 3, Full Load Current - Inductive 7 A, Full Load Current - Resistive 22 A, Reversing Capability Non-Reversing, Overall Height 3 in, Overall Width 3 in, Terminal Connection Type Screw Terminals, Frame Size B, Mounting Style DIN Rail, Panel, Series XT, Number of Auxillary Contacts 1, Contactor Style IEC, Horsepower @ Three Phase - 240V AC 2 hp.

Padlock, Keyed Different, Standard Shackle, Rectangular Steel Body, Boron Shackle, 15/16 in W Padlock, Shackle Dia..