75, Tolerance +.005, Overall Length 2 in.Pin Gage, Material Tool Steel; Rc 60/65, Finish Steel - 10 Microfinish or Better, Diameter 8.

500102 Tubular Handle L=550, Form:B Stainless Steel,.

12x25x12x75 4FL 4.00 Corner Radius Multi-Helix Ultra V4 with Flat, PowerN.

00 Corner Radius Multi-Helix Ultra V4 with Flat, PowerN.25x38x25x100 4FL 5.

3/8x1x3/8x2-1/2 2FL Downcut Spiral Fishtail End WRouter.

3/4x3x3/4x6 4FL .030 Corner Radius Multi-Helix Ultra V4, PowerNR.

3/4x7/8x3/4x3-1/2 5FL .

5x16x5x50 5FL 0.75mm Corner Radius 45 Helix HY5, PowerA.

20x36x20x100 2FL Square Aluminum Xtreme Chipbreaker Endmill, ZrN.

1/8x5/16x2-1/8 90 #4 Combined Drill & Countersink, PowerA.

1/2x1-1/4x1/2x3 5FL .

M70803 6x25x6x63 Burend Fiberglass Router.

1x4x1x6 2FL Square Long Endmill.

75 Corner Radius Multi-Helix Ultra V5 with Flat, PowerN.12x25x12x75 5FL 0.

040 Corner Radius Aluminum Xtreme Endmill.7/16x1x7/16x4 2FL .

1/2x1-1/2x1/2x6 3FL .090 Corner Radius Aluminum Xtreme Endmill.

3/8x1x3/8x2-1/2 2FL Upcut Spiral Fishtail End WRouter.

15503 5/8x1-3/16x1/4x2-15/16 14 Included Radius Cone Diamond Cut.

M15162 6x16x6x166 14 Radius Cone Alumacut.

.1610x7/8x5/32x2-3/4 4FL 45 CHAMFER END STRAIGHT FLUTE REAMER.

10x25x10x70 4FL 3.00mm Corner Radius Endmill, PowerA.

3/4x3x3/4x6 5FL Ball Multi-Helix Ultra V5, PowerN.

25 Corner Radius 45 Helix Ultra HY5, PowerN.10x14x10x50 5FL 1.

5x123 3FL 130 Maximizer Point Drill DIN 6539.5x62x17.17.

6x16x6x63 4FL Ball Double End Endmill.

2638x2.992x.48 2FL 140 Point 30 Helix Coolant Through Hurricane Drill, PowerA.3150x4.

9.7x95x10x142 2FL 140 Point 30 Helix Coolant Through Hurricane Drill, PowerA.

4x34x6x72 2FL 140 Point 30 Helix Coolant Through Hurricane Drill, PowerA.3.

1/2x1/2x1/2x6 6FL .060 Corner Radius Long Mold-Mill .

01904 3/4x1x1/4x2-3/4 Cylinder No Endcut Chipbreaker.