Slot Key Twist-In D=M08 B=11,6 Steel

•Made of Viton (fluorocarbon elastomer) for use with a variety of chemicals and fuels•Round cross-section to provide a seal between cylindrical overlapping surfaces•Durometer (hardness) of 90A for resistance to penetration.

•Made of Ethylene Propylene Diene Monomer (EPDM) rubber for use with a variety of chemicals and environments•Round cross-section to provide a seal between cylindrical overlapping surfaces•Durometer (hardness) of 70A for resistance to penetration.

•Made of Buna-nitrile (also called Buna-N) for use with a variety of fluids and hydrocarbons•These versatile o-rings perform well in petroleum based oils & fuels, aliphatic hydrocarbons, vegetable oils, silicone oils & greases, ethylene glycol, dilute acids, and water to below 100°C (212°F)•Durometer (hardness) of 90A for resistance to penetration.

2" x 3-1/2" No Lead Red Brass Nipple.

Pressure Gauge, 4" 304SS Case, 316SS Internals, 30/60 psi, 1/2 NPT Male Back Conn, Glycerin Filled, 304SS Front Flange Corrosion-resistant fillable dry or liquid-filled gauge.Cleaning for Oxygen Service O2 is available only for dry or HL Halocarbon filled gauges. 304SS Case, 316SS Internals, 5000 psi/bar, 1/2 NPT Male Back Conn, Glycerin Filled, 304SS Bezel & U-Clamp.

316 Stainless Steel wetted parts.5" 304SS Case, 316SS Internals, 5000 psi, 1/4 NPT Male Bottom Conn, -40 Degree Service Filled, Maximum Indicating Pointer Vacuum and compound ranges through 0 psi to 20,000 psi. Corrosion-resistant fillable dry or liquid-filled gauge.

0808 Slot Key Twist-In D=M08 B=11,6 Steel.KIPP K1026.

KIPP K0635.4308 Indexing Plunger Without Collar Size:3 D1=M16X1,5, D=8, Form:U.

KIPP K1026.0808 Slot Key Twist-In D=M08 B=11,6 Steel.

KIPP K0635.4308 Indexing Plunger Without Collar Size:3 D1=M16X1,5, D=8, Form:U.