reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Solid Carbide Micro End Mill, DLC Coated, 2.5 X 15 Mm

About The . For the highest demands regarding performance and precision in aluminium materials. 0 / -0. Double relief ground with 2 hollow-ground chamfers

Tolerances: Neck Dia. Note: At greater tool overhang lengths, use a reduced value for ap!Values for:slots milled from solid: ap = 0.25xDxap corrside milling: ap = 0.5xDxap corrTo calculate the feed rate vf please use the actual speed of the machine the maximum possible speed!e.g: vf = 18000 rpmx fz mm/Zx z Through-coolant: no Tolerance nominal Dia. D1 = 0 / -0.01 mm. of teeth Z: 2 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h5 No. 0 / -0.005 No. Recess angle a = 16 Deg. Double relief ground with 2 hollow-ground chamfers. Ds: 4 mm Extremely tight tolerances ensure maximum accuracy. With advanced DLC sp2 coating. of teeth Z: 2 Flute length Lc: 3.7 mm Overhang length L1 incl. recess: 15 mm Recess Dia. For the highest demands regarding performance and precision in aluminium materials. D1: 2.41 mm Overall length L: 50 mm Shank Dia.

Cutting Tools,End Mills,Carbide End Mills

Solid Carbide Micro End Mill, DLC Coated, 2.5 X 15 Mm

Cutting Tools,End Mills,Carbide End Mills

Specifications of Solid Carbide Micro End Mill, DLC Coated, 2.5 X 15 Mm

Category
Instockinstock

Last Updated

Solid Carbide Micro End Mill, DLC Coated, 2.5 X 15 Mm
More Varieties

Rating :- 8.03 /10
Votes :- 1405
Ground flutes, with high concentricity.

Ground flutes, with high concentricity.

75 mm 2 4xD on NC machines and automatic machines.

    • Extra long version.
    • recess: 18 mm Recess Dia.

    recess: 18 mm Recess Dia.

    Double relief ground side clearance angle.. Ds: 4 mm D1: 3.

    • Advanced micro-geometry, convex cutting edge and conical profile grinding to provide additional stability for the main cutting edge.

    Advanced micro-geometry, convex cutting edge and conical profile grinding to provide additional stability for the main cutting edge.

    optimized flute geometry and patented face geometry for reliable chip evacuation in steel materials and cast material.5 x DC.

    • h10 No.
    • recess: 60 mm Recess Dia.

    recess: 60 mm Recess Dia.

    91 mm Overall length L: 100 mm of teeth Z: 2 Flute length Lc: 4. of teeth Z: 2 Helix angle: 30 degrees Shank: DIN 6535 HA to h5 No.

    • Tolerances: Neck Dia.

    Tolerances: Neck Dia.

    5 x 15 mm Double relief ground with 2 hollow-ground chamfers. of teeth Z: 2 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h5 No.005 No. D1 = 0 / -0.

    • +/, 0.003 mm: Manufacturing or cutting tolerance of nominal Dia.

    +/, 0.003 mm: Manufacturing or cutting tolerance of nominal Dia.

    Significantly improved self-centering due to additional pyramid tip for optimum roundness and tolerance accuracy of the hole that is produced. Note: Flute length LC = L2 + 1.

    • Tolerances: Neck Dia.

    Tolerances: Neck Dia.

    7 mm Overhang length L1 incl. Extremely tight tolerances ensure maximum accuracy. Note: At greater tool overhang lengths, use a reduced value for ap!Values for:slots milled from solid: ap = 0.

    • +/, 0.003 mm: Manufacturing or cutting tolerance of nominal Dia.

    +/, 0.003 mm: Manufacturing or cutting tolerance of nominal Dia.

    For producing toleranced holes in steel or short-chipping materials. DC.