reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

HSS Hand Reamer, 20 Mm

About The 148350, 148200, 148410 and extensions No.149400. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.With left-hand helix 7 8 Deg and long taper lead, more than 1/5 of the cutting length

148350, 148200, 148410 and extensions No.149400. With left-hand helix 7 8 Deg and long taper lead, more than 1/5 of the cutting length. Also very suitable for interrupted holes. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer. Application: For through holes not for blind holes. For suitable tap wrenches see No. 160200. Note: Hand reamers finish ground to match your specifications can be ordered as No.

Cutting Tools,Reamers,Hand Reamers

HSS Hand Reamer, 20 Mm

Cutting Tools,Reamers,Hand Reamers

Specifications of HSS Hand Reamer, 20 Mm

Category
Instockinstock

Last Updated

HSS Hand Reamer, 20 Mm
More Varieties

Rating :- 8.43 /10
Votes :- 1448
Tolerances: Neck Dia.
    • +/, 0.003 mm: Manufacturing or cutting tolerance of nominal Dia.

    +/, 0.003 mm: Manufacturing or cutting tolerance of nominal Dia.

    Significantly improved self-centering due to additional pyramid tip for optimum roundness and tolerance accuracy of the hole that is produced. For producing toleranced holes in steel or short-chipping materials.

    • The flashlight is supplied with a charging cable and a power adapter.
    • Ds: 20 mm

    Ds: 20 mm

    Straight fluted, without profile distortion. of teeth Z: 6 small Dia.D2: 20 mm Flute length Lc: 6 mm Overall length L: 80 mm Shank Dia.

    • Ground flutes, with high concentricity.

    Ground flutes, with high concentricity.

    2 4xD on NC machines and automatic machines.

    • D1: 11 mm Overall length L: 83 mm

    D1: 11 mm Overall length L: 83 mm

    5 mm Overhang length L1 incl. With the latest generation of DLC coating sp2. of teeth Z: 2 Helix angle: 30 degrees Shank: DIN 6535 HA to h6 No.

    • Values for: slots milled from solid: ap = 0.1xDxap korr side milling: ap = 0.2xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed!
    • 148350, 148200, 148410 and extensions No.149400.

    148350, 148200, 148410 and extensions No.149400.

    The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer. Note: Hand reamers finish ground to match your specifications can be ordered as No. 160200.

    • Values for: slots milled from solid: ap = 0.1xDxap korr side milling: ap = 0.2xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed!

    Values for: slots milled from solid: ap = 0.1xDxap korr side milling: ap = 0.2xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed!

    With crystalline diamond sp3 coating. Note: At greater tool overhang lengths, use a reduced value for ap! Tolerances: Neck Dia. recess: 6 mm Recess Dia.38 mm Overall length L: 45 mm Shank Dia.

    • 148350, 148200, 148410 and extensions No.149400.